Re: [newbie] Cinelerra
On Tue, 15 Jun 2004 01:20:05 -0400 Charles A Edwards <[EMAIL PROTECTED]> wrote: > I also have attempted to build 1.2.0 and it is my sincere belief, Yes > there was a gunman in the grassy knoll, that cinelerra-1.2.0 contains There is a config file, but it's hidden in the top-level directory. :) Perhaps I did not choose some of the options correctly. I am not sure how to set them all for a Mandrake system. It does seem to do things a tad bit nonstandardly, for instance it seems to get compiler settings from files inside the source directories (gcc `cat somethingorother` ) but that shouldn't be a big thing. The one assembler diagnostic, along the lines of "NOT SUPPORTED is not supported" is something I'm not sure how to deal with at the moment. It does seem to require nasm rather than gnu 'as' but I think I have that. I will probably try another go at it this weekend to see if I can flush out the avifile-devel dependency issue (I had some avifile headers in /usr/local/include, but that was for a rev that's fairly obsolete, a couple of Mandrake versions ago :). I doubt such a conspiracy exists, however. It's fully open source, the source is on sourceforge. Yes, it's plf for somewhat obvious reasons but anyone can get the source code and compile it, at least in theory. -- David E. Fox Thanks for letting me [EMAIL PROTECTED]change magnetic patterns [EMAIL PROTECTED] on your hard disk. --- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Cinelerra
On Sun, 13 Jun 2004 21:35:13 -0500 Linus Drouhard <[EMAIL PROTECTED]> wrote: > > Thanks for all the work. I haven't had a chance to try the > "downgrade" path yet. I won't waste my time compiling the latest > version until an even later version comes out. Compilation, at least in this case, did not help. I still got the same aborted message when running the resulting binary. I wrote the packager (Austin Acton) and he says that he is aware of the problem, wixhed me luck on compiling, and is intent on producing a new plf rpm within a week if all goes well - so I'd wait a little while, and then raid plf's cupboards :). Oh, and I was not successful in compiling the source of the newer version. The source needs avifile-devel it seems, and ATM I can't get that package installed due to a dependency file that urpmi can't find. I figure that will sort itself out. I also got one or two obscure assembler messages that ATM I'm not sure what to do. In short, the binary I'm using works, is a slightly newer (1.2.0) version, but it's only available AFAICT as a i386 binary rpm, so it likely wouldn't use the MMX stuff :(. http://aleron.dl.sourceforge.net/sourceforge/heroines/cinelerra-1.2.0-1.i386.rpm if you're interested :) You'll need an XFree compatibility library, but it'll let yuo know that. > Linus -- David E. Fox Thanks for letting me [EMAIL PROTECTED]change magnetic patterns [EMAIL PROTECTED] on your hard disk. --- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Cinelerra
On Sat, 12 Jun 2004 06:43:31 -0700 "David E. Fox" <[EMAIL PROTECTED]> wrote: > On Fri, 11 Jun 2004 22:02:07 -0700 > "David E. Fox" <[EMAIL PROTECTED]> wrote: > > > > > It's building now (found one dependency, needed texinfo) but may > > take a while. 1ghz athlon here. :) > > (later) > > It built (you need gobs of RAM, as once I saw gcc taking up ~100 megs > on one source file). I installed the binary rpm that it built, but I'm > getting the same behavior as with PLFs binary rpm. ;( I guess > downgrading is an option here. > > I will probably take a look see at 1.1.6 src from the 9.2 plf > repository, see what that dses & or file a bug with the plf maintainer > later today. Right now I'm off to work. > > -- Thanks for all the work. I haven't had a chance to try the "downgrade" path yet. I won't waste my time compiling the latest version until an even later version comes out. This is nothing urgent, it just bothered me that I couldn't get this to run, thought I screwed something up. It reassuring that it wasn't me. Thanks again, Linus Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Cinelerra
On Fri, 11 Jun 2004 22:02:07 -0700 "David E. Fox" <[EMAIL PROTECTED]> wrote: > > It's building now (found one dependency, needed texinfo) but may take > a while. 1ghz athlon here. :) (later) It built (you need gobs of RAM, as once I saw gcc taking up ~100 megs on one source file). I installed the binary rpm that it built, but I'm getting the same behavior as with PLFs binary rpm. ;( I guess downgrading is an option here. I will probably take a look see at 1.1.6 src from the 9.2 plf repository, see what that dses & or file a bug with the plf maintainer later today. Right now I'm off to work. -- David E. Fox Thanks for letting me [EMAIL PROTECTED]change magnetic patterns [EMAIL PROTECTED] on your hard disk. --- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Cinelerra
On Thu, 10 Jun 2004 21:33:02 -0500 Linus Drouhard <[EMAIL PROTECTED]> wrote: > Can anyone get Cinelerra to run? I'm running Mandrake 10. Everytime > I try to run Cinelerra I get followup luckily, found a source rpm for it on ftp.club-internet.fr:/pub/linux/plf It's building now (found one dependency, needed texinfo) but may take a while. 1ghz athlon here. :) -- David E. Fox Thanks for letting me [EMAIL PROTECTED]change magnetic patterns [EMAIL PROTECTED] on your hard disk. --- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Cinelerra
On Thu, 10 Jun 2004 21:33:02 -0500 Linus Drouhard <[EMAIL PROTECTED]> wrote: > Can anyone get Cinelerra to run? I'm running Mandrake 10. Everytime > I try to run Cinelerra I get Me neither. 1.1.8-1 from plf. I just installed it with urpmi. I had this thing working before, but never really did anything with it. At that time under 9.2, I only had 256 megs of RAM. I wanted to revisit it a little while ago when I upped the memory to 768 megs, but I did not get very far, so I urpme'd it. In this version I get the opening splash screen, a number of progress bars indicating that things are being loaded, and then just an "aborted" message, but no indication as to why it was aborted (like no SIGILL, etc.) Running it inside of gdb gives me a sign that the process incurred a signal SIGABRT (abort) and something about not being able to access a particular memory region. ump of assembler code from 0xe3f0 to 0xe430: 0xe3f0: Cannot access memory at address 0xe3f0 (gdb) bt #0 0xe410 in ?? () #1 0xbfffb72c in ?? () #2 0x0006 in ?? () #3 0x4c15 in ?? () #4 0x40269640 in raise () from /lib/tls/libc.so.6 #5 0x4026b149 in abort () from /lib/tls/libc.so.6 #6 0x401ea0f5 in __cxa_call_unexpected () from /usr/lib/libstdc++.so.5 Hmm. Maybe a conflict in libstdc++ ? After that, it just aborts, looks like it fell off the stack. #7 0x401ea132 in std::terminate() () from /usr/lib/libstdc++.so.5 #8 0x401ea2b2 in __cxa_throw () from /usr/lib/libstdc++.so.5 #9 0x401ea4ef in operator new(unsigned) () from /usr/lib/libstdc++.so.5 #10 0x401ea5bd in operator new[](unsigned) () from #/usr/lib/libstdc++.so.5 11 0x084cd065 in #BC_Theme::get_image_data(char*) () 12 0x084cc167 in #BC_Theme::new_image(char*, char*) () 13 0x08254c4a in #Theme::initialize() () 14 0x081cf834 in MWindow::init_theme() () #15 0x081d128e in MWindow::create_objects(int, int) () #16 0x081b746c in main () Next thing to try - maybe - compiling the thing from a source rpm if I can find one. I had to do that f.i. with gimp sometime back (. -- David E. Fox Thanks for letting me [EMAIL PROTECTED]change magnetic patterns [EMAIL PROTECTED] on your hard disk. --- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Cinelerra
On Thu, 2004-06-10 at 23:33, Linus Drouhard wrote: > I get no error messages, nothing but "Aborted". Any suggestions? > I had the same problem with a version of it, but I can't remember what it was. I'm running 9.2. and Cinelerra 1.1.6 is working fine. You could give it a try. -- josenildo marques icq #289971493 homepage http://cyb.ezdir.net registered linux user #341648 * "I can't understand why people are frightened of new ideas. I'm frightened of the old ones." John Cage Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Cinelerra
Can anyone get Cinelerra to run? I'm running Mandrake 10. Everytime I try to run Cinelerra I get Cinelerra 1.1.8 Fri Dec 26 06:06:47 EST 2003 (C)2003 Heroine Virtual Ltd. Cinelerra is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. There is absolutely no warranty for Cinelerra. Aborted I get no error messages, nothing but "Aborted". Any suggestions? Thanks, Linus Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] cinelerra is ill
On Sun, 25 Jan 2004 12:29:15 -0200 Josenildo Marques <[EMAIL PROTECTED]> wrote: > > Yes, as you said, it's not easy and the output text is very long > indeed. I selected some lines which I thought were worth showing. You may find that the output is similar to that of a lot of programs since the libraries are looked for in a large number of places. If they are not found, you get ENOENT (file not found) and the loader looks for it somewhere else. What you probably snipped is the startup, which is not as useful as the stuff near where the error occurred. For a compicated file, the strace can be very voluminous. You can also try running it inside a gdb. And yes, posting to the cinelerra list may be a better idea - you'll probably be able to get more help. I'm not in any way trying to suggest it's off topic, but it does make sense to ask communities where you might be able to get more help. For instance, I could ask a New Yorker in the middle of Central Park how to get to Wall Street and get a good answer. But I could ask a taxi driver and I might even get a better one. Hmm. I might follow my own advice and ask about some gimp problems on the gimp-users list. :) -- David E. Fox Thanks for letting me [EMAIL PROTECTED]change magnetic patterns [EMAIL PROTECTED] on your hard disk. --- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] cinelerra is ill
On Sat, 2004-01-24 at 18:23, David E. Fox wrote: > I can get it to bring up the various windows fine, but don't try it on a > largish .avi file (like a movie rip) because it seems to be limited via > available memory and/or swap. I can deal with smaller avi's (up to about > 50 megs) though. > > > Aborted > > That's a clue. It doesn't really explain why -- no seg fault, etc., > right? Sometimes for things like this it's nice to try running strace > (strace 2>out cinelerra &) and see what might have gone wrong. But > interpreting the output of strace is not all that easy. Hi, David. Thanks. Yes, as you said, it's not easy and the output text is very long indeed. I selected some lines which I thought were worth showing. I think this is already off-topic and may be better dealt with on cinelerra list... Well, I think I'll wait for the next release. Anyway, thanks a lot. = open("/etc/ld.so.preload", O_RDONLY)= -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3 == open("/lib/i686/sse/mmx/libXcursor.so.1.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/i686/sse/mmx", 0xbfffc4f0) = -1 ENOENT (No such file or directory) open("/lib/i686/sse/libXcursor.so.1.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/i686/sse", 0xbfffc4f0) = -1 ENOENT (No such file or directory) open("/lib/i686/mmx/libXcursor.so.1.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/i686/mmx", 0xbfffc4f0) = -1 ENOENT (No such file or directory) open("/lib/i686/libXcursor.so.1.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/i686", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0 open("/lib/sse/mmx/libXcursor.so.1.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/sse/mmx", 0xbfffc4f0) = -1 ENOENT (No such file or directory) open("/lib/sse/libXcursor.so.1.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/sse", 0xbfffc4f0) = -1 ENOENT (No such file or directory) open("/lib/mmx/libXcursor.so.1.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/mmx", 0xbfffc4f0) = -1 ENOENT (No such file or directory) open("/lib/libXcursor.so.1.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0 open("/usr/lib/i686/sse/mmx/libXcursor.so.1.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/i686/sse/mmx", 0xbfffc4f0) = -1 ENOENT (No such file or directory) open("/usr/lib/i686/sse/libXcursor.so.1.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/i686/sse", 0xbfffc4f0) = -1 ENOENT (No such file or directory) open("/usr/lib/i686/mmx/libXcursor.so.1.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/i686/mmx", 0xbfffc4f0) = -1 ENOENT (No such file or directory) open("/usr/lib/i686/libXcursor.so.1.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/i686", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0 open("/usr/lib/sse/mmx/libXcursor.so.1.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/sse/mmx", 0xbfffc4f0) = -1 ENOENT (No such file or directory) open("/usr/lib/sse/libXcursor.so.1.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/sse", 0xbfffc4f0) = -1 ENOENT (No such file or directory) open("/usr/lib/mmx/libXcursor.so.1.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/mmx", 0xbfffc4f0) = -1 ENOENT (No such file or directory) open("/usr/lib/libXcursor.so.1.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib", {st_mode=S_IFDIR|0755, st_size=45056, ...}) = 0 = open("/home/cyb/.Xdefaults-kali.localhost.localdomain", O_RDONLY) = -1 ENOENT (No such file or directory) open("/home/cyb/.icons/default/cursors/top_left_arrow", O_RDONLY) = -1 ENOENT (No such file or directory) open("/home/cyb/.icons/default/index.theme", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/icons/default/cursors/top_left_arrow", O_RDONLY) = -1 ENOENT (No such file or directory) = open("/usr/share/pixmaps/default/cursors/top_left_arrow", O_RDONLY) = -1 ENOENT (No such file or directory) open("/home/cyb/.icons/default/cursors/crosshair", O_RDONLY) = -1 ENOENT (No such file or directory) open("/home/cyb/.icons/default/index.theme", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/icons/default/cursors/crosshair", O_RDONLY) = -1 ENOENT (No such file or directory) -- josenildo marques icq #289971493 homepage http://cyb.ezdir.net registered linux user #341648 * Grande literatura é apenas linguagem carregada de sentido até o mais elevado grau possível. Ezra Pound Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] cinelerra is ill
Hello! Has anybody here tried to run Cinelerra ? The version I have is cinelerra-1.1.8-1plf. >From the CL what I see is [EMAIL PROTECTED] cyb]$ cinelerra Cinelerra 1.1.8 Fri Dec 26 07:40:04 EST 2003 (C)2003 Heroine Virtual Ltd. Cinelerra is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. There is absolutely no warranty for Cinelerra. Aborted Then it simply vanishes into thin air... -- josenildo marques icq #289971493 homepage http://cyb.ezdir.net registered linux user #341648 * "You're empty." "So are you." -- Agent Smith and Neo, "The Matrix" Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com