Re: [newbie] Display in LM8
Dear Don & All, Yes, my settings are at 600x400 and I cannot find a way to change them. There was no other choice offered in Mandrake Control Center.I did it in 7.2 but cannot find out how to do it on this distribution. How may I do that? Also, is XF86Setup on this distro? I cannot get it from the terminal. Thank you for your help. Sincerely, Marcia On Monday 02 July 2001 20:45, D. Hoyem wrote: > Marcia, > Have you looked at the Configuration --> Other --> > Mandrake Control Panel and in there you can look at > what the settinfgs are for the display.. From what you > have said it appears that you display is set to > 600x400 and that display is hard to see like you say. > Try 800x600 and see if that works better. > Don > > --- Marcia Waller <[EMAIL PROTECTED]> wrote: > > Dear All, Since I have had LM8 I cannot get my > > display to the correct config. > > Alot of my programs are cut off at the bottom so > > that I cannot see the OK , > > Apply, or Cancel buttons. I have a generic S3Virge > > which worked perfectly in > > 7 and 7.2. How may I remedy this problem? I already > > did a new config file > > with xf86config. That did not seem to change > > anything. Any help will be > > greatly appreciated. Sincerely, Marcia > > -- > > Marcia Waller > > __ > Do You Yahoo!? > Get personalized email addresses from Yahoo! Mail > http://personal.mail.yahoo.com/ -- Marcia Waller
Re: [newbie] Display in LM8
Marcia, Have you looked at the Configuration --> Other --> Mandrake Control Panel and in there you can look at what the settinfgs are for the display.. From what you have said it appears that you display is set to 600x400 and that display is hard to see like you say. Try 800x600 and see if that works better. Don --- Marcia Waller <[EMAIL PROTECTED]> wrote: > Dear All, Since I have had LM8 I cannot get my > display to the correct config. > Alot of my programs are cut off at the bottom so > that I cannot see the OK , > Apply, or Cancel buttons. I have a generic S3Virge > which worked perfectly in > 7 and 7.2. How may I remedy this problem? I already > did a new config file > with xf86config. That did not seem to change > anything. Any help will be > greatly appreciated. Sincerely, Marcia > -- > Marcia Waller > __ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail http://personal.mail.yahoo.com/
[newbie] Display in LM8
Dear All, Since I have had LM8 I cannot get my display to the correct config. Alot of my programs are cut off at the bottom so that I cannot see the OK , Apply, or Cancel buttons. I have a generic S3Virge which worked perfectly in 7 and 7.2. How may I remedy this problem? I already did a new config file with xf86config. That did not seem to change anything. Any help will be greatly appreciated. Sincerely, Marcia -- Marcia Waller
