On Saturday 22 March 2003 05:20 pm, James Henry Maiewski wrote:
Hello, again
I just realised that the line in /etc/fstab might be better written
as:
/dev/sda1 /mnt/camera auto auot,user,noauto,ro 0 0
the "ro" is read-only. The manual for my camera warnes about trying
to load from outside. this might be hokum, but I thought it best to
mention it.
-Jim M.
> Hello,
>
> I also recently purchased a digital camera and was dismayed that
> it did not seem to be supported by gphoto. However, it might be
> that this is the case because the camera acts as a mass storage
> device (is it USB?). There are several good examples of how one
> can set this up in the newbie archives. Ineeded to add a line to
> /etc/fstab [does anybody know what 'fstab' stands for?] such as:
>
> /dev/sda1 /mnt/camera auto auto,user,noauto 0 0
>
> depending on what you have hooked up, the 'sda1,' might be 'sdb1,'
> and so on. the letter after 'sd' is determined by the order of the
> device on the list output by:
>
> cat /proc/scsi/scsi
>
> Then issue the command (as root):
>
> mkdir -m 777 /mnt/camera
>
> after a reboot, one only has to use:
>
> mount /mnt/camera
>
> (assuming that the camera is plugged in and there is some media in
> the camera). At this point, look in the /mnt/camera.
>
> Good luck.
>
> -Jim M.
>
> On Saturday 22 March 2003 02:59 pm, Andrew Scotchmer wrote:
> > Just got my first digital camera as it was sooo cheap. It is a
> > fujifilm finepix 2200.
> >
> > Anyone know if any software outthere supports this. I've checked
> > fuji web site with no luck and gphoto did not list it as a camera
> > it supports though there were a few fuji models so maye I'll give
> > it a try and find out.
> >
> > Andrew
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com