That's what I was thinking, Rod. But I was hoping to not have to do that.
But, such is life.
As far as the settings go, all is the same and the motherboard is new. The
I/O address did change(I think). The only thing i noticed is that in the
boot sequence, Linux was looking for hde and it used to be hda. Go figure?
-Original Message-
From: Rod Baxter [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, October 10, 2000 8:44 AM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: Re: [newbie] IDE drives
On mandrakes website, they advertise they support udma66 with 7.1. I dont
know which chipsets, but that what they say...
It should still boot. have you got the settings the same? LBA? Have a look
at the cyl, hds, sectors to make sure the settings are the same on both
motherboards. And I have had the problem with some old motherboards that the
mappings were not compatible, which means a reinstall.
I dont know how far it will get into the boot, as most of your devices will
probably be at different I/O address and so on. The more I think about it I
believe you are up for a reinstall. Copy off all your config first, do the
upgrade, install and restore them.
Regards,Rod
- Original Message -
From: "Ruben Figal Calaforra" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, October 10, 2000 10:29 PM
Subject: Re: [newbie] IDE drives
> I don't know about v.7.1, but mine is a v.7.0 (previous release), and my
new
> Seagate SV2044D (20.4 Gb, IDE UDMA/66) is working flawlessly on an "old"
> Pentium 166 MHz.
> My BIOS did not see the whole disk (just about 8 Gb), and I was resigned
to
> living with an "amputated" HD, but then I installed Linux and it realised
the
> real capacity, I don't know how. I have feared to get into the BIOS ever
since.
>
> "Kelly, Christopher" wrote:
>
> > I thought that I posted this last night, but I never saw it come up on
the
> > list...
> >
> > Does anyone know if Linux MDK 7.1 supports Ultra DMA\66 IDE drives? I
just
> > got a new motherboard and I can't get my HDD with Linux on it to boot.
Do I
> > need to reinstall? Help!
> >
> > Thanks,
> > Chris Kelly
> > Registered Linux user 185775
>
> --
> This email is confidential and intended solely for the use of the
individual to whom it is addressed. Any views or opinions presented are
solely those of the author and do not necessarily represent those of Sema
Group.
> If you are not the intended recipient, be advised that you have received
this email in error and that any use, dissemination, forwarding, printing,
or copying of this email is strictly prohibited.
> --
>
>
>
>
