RE: [newbie] Tulip drivers will not work/compile

[Gil]

Thanks Ed, and to everyone who tried to help.

It was plug and play awareness in my bios.
It is disabled and now networking works.

-trurl

Re: [newbie] Tulip drivers will not work/compile

[Ed Tharp]

not to press what may have been obvious, but have you turned off all Plug
and Pray awareness in your bios? was my problem... with the tulip drivers
- Original Message -
From: "Gil" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, December 25, 2000 4:04 PM
Subject: [newbie] Tulip drivers will not work/compile


> Please can anyone on this list help.
>
> System:
>
> Mb: asus cusl2
> Ethernet cards:  LNE100tx, old card that used to work under 7.0 w/ tulip
> drivers
> OS: mandrake 7.2
>
> My network cards do not curently work under linux (win 98 ok) the old
> unnamed card worked fine under 7.0 with a diferent MB.
>
> I have tulip.o in /lib/modules/.../net, but when i try "modprobe tulip.o"
it
> is not found, i tried this after running "depmod -a"
>
> I have also tried compiling the latest drivers and get errors reporting
that
> pci-scan.h and kern-compat.h are not found.
>
> I have also tried swaping card slots, and trying each card alone.
>
> Thank in advace.
>
> trurl
>
>
>

Re: [newbie] Tulip drivers will not work/compile

[civileme]

On Monday 25 December 2000 22:04, you wrote:
> Please can anyone on this list help.
>
> System:
>
> Mb: asus cusl2
> Ethernet cards:  LNE100tx, old card that used to work under 7.0 w/ tulip
> drivers
> OS: mandrake 7.2
>
> My network cards do not curently work under linux (win 98 ok) the old
> unnamed card worked fine under 7.0 with a diferent MB.
>
> I have tulip.o in /lib/modules/.../net, but when i try "modprobe tulip.o"
> it is not found, i tried this after running "depmod -a"
>
> I have also tried compiling the latest drivers and get errors reporting
> that pci-scan.h and kern-compat.h are not found.
>
> I have also tried swaping card slots, and trying each card alone.
>
> Thank in advace.
>
> trurl
Look in /lib/modules/2.2.17-21mdk

There is tulip.o and old_tulip.o  One of them should work

Civileme

Re: [newbie] Tulip drivers will not work/compile

[John Murphy]

On Monday 25 December 2000 16:04, you wrote:
> Please can anyone on this list help.
>
> System:
>
> Mb: asus cusl2
> Ethernet cards:  LNE100tx, old card that used to work under 7.0 w/ tulip
> drivers
> OS: mandrake 7.2

I'm using a Linksys LNE 100TX version 4.1  All I did was in the network setup 
choose eth0, then couple lines down go with the tulip driver.  Didn't add or 
compile any other drivers just the stock setup.  My log below from my LNE 
100TX Linksys card.

kernel: tulip.c:v0.92l 8/19/2000  Written by Donald Becker <[EMAIL PROTECTED]>
kernel: http://www.scyld.com/network/tulip.html
kernel: eth0: Lite-On PNIC-II rev 37 at 0xc988b000, 00:A0:CC:E1:3F:09, IRQ 9.

John

--- 
Linux, Win, DOS,- also known as the Good, the Bad and the Ugly!
---

Contentment - is not the fulfillment of what you want, but the
realization of how much you already have.

---