RE: [newbie] cannot get modem device ID with cat /proc/pci
think the official site for the drivers is: http://www.mbsi.ca/cnxtlindrv -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of root Sent: Tuesday, 28 May 2002 2:20 AM To: [EMAIL PROTECTED] Subject: Re: [newbie] cannot get modem device ID with cat /proc/pci For a Conexant winmodem you can find drivers for Red Hat and Mandrake at www.olitec.com ! Good luck ! Walter > On Sunday 26 May 2002 02:23 pm, you wrote: > > Hi, I'm using Mandrake on two computers. On the first, with cat > > /proc/pci, I got vendor and device ID's of the communications controller: > > > > Communication controller: PCI device 10b7:1007 (3Com Corporation) > > (rev 16). > > > > Using this, I was able to search the WinModem docs on the Web and > > conclude that my modem doesn't work under Linux. > > > > On the second computer, Windows calls the PCI modem "Lucent WinModem", > > and cat /proc/pci returns the bus number, IRQ, and > > Communications Controller Lucent Microelectronics 56k WinModem (rev 1). > > > > No vendor or device ID. I've heard people can maybe use some Lucent > > modems, but how can I tell which driver I need? > > > > Alan > > Alan: > The first thing to do is to find out exactly what modem you have. Linux > drivers have been written for some Lucent chipsets, but others are > not going to work. The best way to ID your modem is to open up the box and > look at the modem. Note the FCC number, and any part numbers that are on > the Lucent or whatever chip. You can go to www.fcc.gov.oet/fccid/ and > determine the manufacturer and model number. Your next stop should be > www.idir.net/~gromitkc/winmodem.html. Part way down the page, click on the > Download Entire Table link and run a search for the FCC number. If that > doesn't work, try searching for Lucent. You'll also find links to other > information about Lucent-based modems on the first page. > Good luck, > -- cmg Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] cannot get modem device ID with cat /proc/pci
understood, sorry for confusing the issue :-) rgds Frank -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Carroll Grigsby Sent: Tuesday, 28 May 2002 2:24 AM To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: Re: [newbie] cannot get modem device ID with cat /proc/pci Frank: What I meant was the some Lucent-based modems will work under Linux, but other Lucent-based modems won't -- it depends on the specific Lucent chipset. Part of Alan's problem is that Mandrake identifies the modem as a 3Com, but Windows says its a Lucent. His best hope is that Windows is right, and Mandrake is wrong (well, it COULD happen -- yeah, right), and that he's got one of the Lucent chipsets that will work. OTOH, perhaps he got some bad information about the 3Com modem; he can check that out at the address that I gave him. Sorry for the confusion. -- cmg On Monday 27 May 2002 01:24 pm, Franki wrote: > not true... lucent is not the only one.. > > conexant hsf and hcf modems work in linux as well, in fact they have rpm's > designed specifically for mandrake 8.1 and 8.2. > > > rgds > > Frank > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of Carroll Grigsby > Sent: Tuesday, 28 May 2002 12:57 AM > To: [EMAIL PROTECTED] > Subject: Re: [newbie] cannot get modem device ID with cat /proc/pci > > On Sunday 26 May 2002 02:23 pm, you wrote: > > Hi, I'm using Mandrake on two computers. On the first, with cat > > /proc/pci, I got vendor and device ID's of the communications controller: > > > > Communication controller: PCI device 10b7:1007 (3Com Corporation) > > (rev 16). > > > > Using this, I was able to search the WinModem docs on the Web and > > conclude that my modem doesn't work under Linux. > > > > On the second computer, Windows calls the PCI modem "Lucent WinModem", > > and cat /proc/pci returns the bus number, IRQ, and > > Communications Controller Lucent Microelectronics 56k WinModem (rev 1). > > > > No vendor or device ID. I've heard people can maybe use some Lucent > > modems, > > > but how can I tell which driver I need? > > > > Alan > > Alan: > The first thing to do is to find out exactly what modem you have. Linux > drivers have been written for some Lucent chipsets, but others are > not going to work. The best way to ID your modem is to open up the box and > look at the modem. Note the FCC number, and any part numbers that are on > the Lucent or whatever chip. You can go to www.fcc.gov.oet/fccid/ and > determine the manufacturer and model number. Your next stop should be > www.idir.net/~gromitkc/winmodem.html. Part way down the page, click on the > Download Entire Table link and run a search for the FCC number. If that > doesn't work, try searching for Lucent. You'll also find links to other > information about Lucent-based modems on the first page. > Good luck, > -- cmg Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] cannot get modem device ID with cat /proc/pci
Frank: What I meant was the some Lucent-based modems will work under Linux, but other Lucent-based modems won't -- it depends on the specific Lucent chipset. Part of Alan's problem is that Mandrake identifies the modem as a 3Com, but Windows says its a Lucent. His best hope is that Windows is right, and Mandrake is wrong (well, it COULD happen -- yeah, right), and that he's got one of the Lucent chipsets that will work. OTOH, perhaps he got some bad information about the 3Com modem; he can check that out at the address that I gave him. Sorry for the confusion. -- cmg On Monday 27 May 2002 01:24 pm, Franki wrote: > not true... lucent is not the only one.. > > conexant hsf and hcf modems work in linux as well, in fact they have rpm's > designed specifically for mandrake 8.1 and 8.2. > > > rgds > > Frank > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of Carroll Grigsby > Sent: Tuesday, 28 May 2002 12:57 AM > To: [EMAIL PROTECTED] > Subject: Re: [newbie] cannot get modem device ID with cat /proc/pci > > On Sunday 26 May 2002 02:23 pm, you wrote: > > Hi, I'm using Mandrake on two computers. On the first, with cat > > /proc/pci, I got vendor and device ID's of the communications controller: > > > > Communication controller: PCI device 10b7:1007 (3Com Corporation) > > (rev 16). > > > > Using this, I was able to search the WinModem docs on the Web and > > conclude that my modem doesn't work under Linux. > > > > On the second computer, Windows calls the PCI modem "Lucent WinModem", > > and cat /proc/pci returns the bus number, IRQ, and > > Communications Controller Lucent Microelectronics 56k WinModem (rev 1). > > > > No vendor or device ID. I've heard people can maybe use some Lucent > > modems, > > > but how can I tell which driver I need? > > > > Alan > > Alan: > The first thing to do is to find out exactly what modem you have. Linux > drivers have been written for some Lucent chipsets, but others are > not going to work. The best way to ID your modem is to open up the box and > look at the modem. Note the FCC number, and any part numbers that are on > the Lucent or whatever chip. You can go to www.fcc.gov.oet/fccid/ and > determine the manufacturer and model number. Your next stop should be > www.idir.net/~gromitkc/winmodem.html. Part way down the page, click on the > Download Entire Table link and run a search for the FCC number. If that > doesn't work, try searching for Lucent. You'll also find links to other > information about Lucent-based modems on the first page. > Good luck, > -- cmg Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] cannot get modem device ID with cat /proc/pci
For a Conexant winmodem you can find drivers for Red Hat and Mandrake at www.olitec.com ! Good luck ! Walter > On Sunday 26 May 2002 02:23 pm, you wrote: > > Hi, I'm using Mandrake on two computers. On the first, with cat > > /proc/pci, I got vendor and device ID's of the communications controller: > > > > Communication controller: PCI device 10b7:1007 (3Com Corporation) > > (rev 16). > > > > Using this, I was able to search the WinModem docs on the Web and > > conclude that my modem doesn't work under Linux. > > > > On the second computer, Windows calls the PCI modem "Lucent WinModem", > > and cat /proc/pci returns the bus number, IRQ, and > > Communications Controller Lucent Microelectronics 56k WinModem (rev 1). > > > > No vendor or device ID. I've heard people can maybe use some Lucent > > modems, but how can I tell which driver I need? > > > > Alan > > Alan: > The first thing to do is to find out exactly what modem you have. Linux > drivers have been written for some Lucent chipsets, but others are > not going to work. The best way to ID your modem is to open up the box and > look at the modem. Note the FCC number, and any part numbers that are on > the Lucent or whatever chip. You can go to www.fcc.gov.oet/fccid/ and > determine the manufacturer and model number. Your next stop should be > www.idir.net/~gromitkc/winmodem.html. Part way down the page, click on the > Download Entire Table link and run a search for the FCC number. If that > doesn't work, try searching for Lucent. You'll also find links to other > information about Lucent-based modems on the first page. > Good luck, > -- cmg Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] cannot get modem device ID with cat /proc/pci
not true... lucent is not the only one.. conexant hsf and hcf modems work in linux as well, in fact they have rpm's designed specifically for mandrake 8.1 and 8.2. rgds Frank -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Carroll Grigsby Sent: Tuesday, 28 May 2002 12:57 AM To: [EMAIL PROTECTED] Subject: Re: [newbie] cannot get modem device ID with cat /proc/pci On Sunday 26 May 2002 02:23 pm, you wrote: > Hi, I'm using Mandrake on two computers. On the first, with cat /proc/pci, > I got vendor and device ID's of the communications controller: > > Communication controller: PCI device 10b7:1007 (3Com Corporation) (rev > 16). > > Using this, I was able to search the WinModem docs on the Web and conclude > that my modem doesn't work under Linux. > > On the second computer, Windows calls the PCI modem "Lucent WinModem", and > cat /proc/pci returns the bus number, IRQ, and > Communications Controller Lucent Microelectronics 56k WinModem (rev 1). > > No vendor or device ID. I've heard people can maybe use some Lucent modems, > but how can I tell which driver I need? > > Alan Alan: The first thing to do is to find out exactly what modem you have. Linux drivers have been written for some Lucent chipsets, but others are not going to work. The best way to ID your modem is to open up the box and look at the modem. Note the FCC number, and any part numbers that are on the Lucent or whatever chip. You can go to www.fcc.gov.oet/fccid/ and determine the manufacturer and model number. Your next stop should be www.idir.net/~gromitkc/winmodem.html. Part way down the page, click on the Download Entire Table link and run a search for the FCC number. If that doesn't work, try searching for Lucent. You'll also find links to other information about Lucent-based modems on the first page. Good luck, -- cmg Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] cannot get modem device ID with cat /proc/pci
On Sunday 26 May 2002 02:23 pm, you wrote: > Hi, I'm using Mandrake on two computers. On the first, with cat /proc/pci, > I got vendor and device ID's of the communications controller: > > Communication controller: PCI device 10b7:1007 (3Com Corporation) (rev > 16). > > Using this, I was able to search the WinModem docs on the Web and conclude > that my modem doesn't work under Linux. > > On the second computer, Windows calls the PCI modem "Lucent WinModem", and > cat /proc/pci returns the bus number, IRQ, and > Communications Controller Lucent Microelectronics 56k WinModem (rev 1). > > No vendor or device ID. I've heard people can maybe use some Lucent modems, > but how can I tell which driver I need? > > Alan Alan: The first thing to do is to find out exactly what modem you have. Linux drivers have been written for some Lucent chipsets, but others are not going to work. The best way to ID your modem is to open up the box and look at the modem. Note the FCC number, and any part numbers that are on the Lucent or whatever chip. You can go to www.fcc.gov.oet/fccid/ and determine the manufacturer and model number. Your next stop should be www.idir.net/~gromitkc/winmodem.html. Part way down the page, click on the Download Entire Table link and run a search for the FCC number. If that doesn't work, try searching for Lucent. You'll also find links to other information about Lucent-based modems on the first page. Good luck, -- cmg Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com