Re: [newbie] K3b help?
On Monday 14 Mar 2005 17:48, Ronald J. Hall wrote: > Thanks Anne. I'm sure some of the difference reflected there is because I'm > still using v9.2 and I think you're on 10.x, right? Versions, yes, but I would think you still need the packages. Anne -- Registered Linux User No.293302 (http://counter.li.org/) Have you visited http://twiki.mdklinuxfaq.org yet? Mandrake at all levels pgpwOM7VIdSbY.pgp Description: PGP signature
Re: [newbie] K3b help?
On Monday 14 March 2005 12:06 pm, Anne Wilson wrote: > On Monday 14 Mar 2005 15:10, Ronald J. Hall wrote: > > On Sunday 13 March 2005 11:47 pm, Dennis Myers wrote: > > > There is an additional package for K3b called K3B-dvd or some such and > > > you need it to be able to burn DVDs. HTH > > > > libk3b1-0.11.9-0.092.1mdk > > k3b-dvd-0.11.9-0.092.1mdk > > k3b-0.11.9-0.092.1mdk > > > > Is what is installed here now Dennis. Is that the package you meant? > > > > Thanks for the reply. > > Checking under Software Uninstaller, under the Archiving group, I have > > cdrdao-1.1.9-6mdk > cdrecord-2.01-1mdk > dvd+rw-tools-5.21.4.10.8-2mdk > k3b-0.11.16-3mdk > k3b-dvd-0.11.17-0.1010.1 > mkisofs-2.01-1mdk > > Anne Thanks Anne. I'm sure some of the difference reflected there is because I'm still using v9.2 and I think you're on 10.x, right? -- /\ Dark> Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] K3b help?
On Monday 14 March 2005 10:43 am, Dennis Myers wrote: > On Monday 14 March 2005 09:10 am, Ronald J. Hall wrote: > > On Sunday 13 March 2005 11:47 pm, Dennis Myers wrote: > > > There is an additional package for K3b called K3B-dvd or some such and > > > you need it to be able to burn DVDs. HTH > > > > libk3b1-0.11.9-0.092.1mdk > > k3b-dvd-0.11.9-0.092.1mdk > > k3b-0.11.9-0.092.1mdk > > > > Is what is installed here now Dennis. Is that the package you meant? > > > > Thanks for the reply. > > Yep, that k3b-dvd is the one I ment. So that must not be the problem. I am > at a loss, all the k3b problems, I use it with CD and DVD and have not had > a problem ever. (knock on wood). I didn't either, until I reinstalled. After that, boom!. It still keeps giving the same error messages. Something about an opc and input/output errors. The debugging message gives this: (this version will show up different than what I posted above because its showing after I switched to Charles Edwards RPMs) System --- K3b Version: 0.11.5 KDE Version: 3.1.3 QT Version: 3.1.2 growisofs --- :-( Failed to change write speed: 8310->11080 growisofs comand: --- /usr/bin/growisofs -Z /dev/scd1 -use-the-force-luke=notray -use-the-force-luke=tty -use-the-force-luke=dao -speed=8 -gui -graft-points -V K3b data project -volset -A K3B THE CD KREATOR VERSION 0.11.5 (C) 2003 SEBASTIAN TRUEG AND THE K3B TEAM -P -p K3b - Version 0.11.5 -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-darklord/k3bGYOdLb.tmp -r -hide-list /tmp/kde-darklord/k3bGpcqTb.tmp -l -iso-level 2 -path-list /tmp/kde-darklord/k3bEnU4yb.tmp So I dunno. I did go back, uninstall and try reinstalling the RPMs from Charles Edwards excellent site, but that made no difference either. I'll keep on plugging at it - there's something I'm missing somewhere. Thanks for the help though! :-) -- /\ Dark> Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] K3b help?
On Monday 14 Mar 2005 15:10, Ronald J. Hall wrote: > On Sunday 13 March 2005 11:47 pm, Dennis Myers wrote: > > There is an additional package for K3b called K3B-dvd or some such and > > you need it to be able to burn DVDs. HTH > > libk3b1-0.11.9-0.092.1mdk > k3b-dvd-0.11.9-0.092.1mdk > k3b-0.11.9-0.092.1mdk > > Is what is installed here now Dennis. Is that the package you meant? > > Thanks for the reply. Checking under Software Uninstaller, under the Archiving group, I have cdrdao-1.1.9-6mdk cdrecord-2.01-1mdk dvd+rw-tools-5.21.4.10.8-2mdk k3b-0.11.16-3mdk k3b-dvd-0.11.17-0.1010.1 mkisofs-2.01-1mdk Anne -- Registered Linux User No.293302 (http://counter.li.org/) Have you visited http://twiki.mdklinuxfaq.org yet? Mandrake at all levels pgpvU0WjbAxle.pgp Description: PGP signature
Re: [newbie] K3b help?
On Monday 14 March 2005 09:10 am, Ronald J. Hall wrote: > On Sunday 13 March 2005 11:47 pm, Dennis Myers wrote: > > There is an additional package for K3b called K3B-dvd or some such and > > you need it to be able to burn DVDs. HTH > > libk3b1-0.11.9-0.092.1mdk > k3b-dvd-0.11.9-0.092.1mdk > k3b-0.11.9-0.092.1mdk > > Is what is installed here now Dennis. Is that the package you meant? > > Thanks for the reply. Yep, that k3b-dvd is the one I ment. So that must not be the problem. I am at a loss, all the k3b problems, I use it with CD and DVD and have not had a problem ever. (knock on wood). -- Dennis M. linux user #180842 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] K3b help?
On Sunday 13 March 2005 11:47 pm, Dennis Myers wrote: > There is an additional package for K3b called K3B-dvd or some such and you > need it to be able to burn DVDs. HTH libk3b1-0.11.9-0.092.1mdk k3b-dvd-0.11.9-0.092.1mdk k3b-0.11.9-0.092.1mdk Is what is installed here now Dennis. Is that the package you meant? Thanks for the reply. -- /\ Dark> Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] K3b help?
On Sunday 13 March 2005 06:13 pm, Ronald J. Hall wrote: > On Sunday 13 March 2005 12:31 pm, Erylon Hines wrote: > > You know, I've found that "occasionally" something will monkey with > > fstab, and stuff that was working correctly fails to mount, or fails to > > mount in the correct place. To allow me to see what has happened, I copy > > my fstab as soon as I get everything working, so I can refer back to it > > when things go south. (The fstab backup created at changes isn't > > reliable, because sometimes I don't notice that stuff isn't working for a > > while, and several changes may have been made). K3b seems to be a big > > offender (as you have found out). Also, turn off harddrake--you can > > always turn it back on when new hardware is added. And sometimes, things > > seem to happen for no good reason that I can determine. I thought that I > > might be the only one, but I guess not. > > > > These are the fstab lines for my CD's with Mdk9.2, no scsi emulation on > > the reader. If there was, it might make cdrom2 /dev/scd1. > > > > none /mnt/cdrom supermount > > dev=/dev/scd0,fs=udf:iso9660,--,rw,user,iocharset=iso8859-1 0 0 > > > > none /mnt/cdrom2 supermount > > dev=/dev/hdd,fs=udf:iso9660,ro,--,iocharset=iso8859-1 0 0 > > > > One thing I know, if you unplug a usb device, and don't reboot when you > > plug it back in, a second mount point for the same device will be added > > (my camera does this continuously), and it drives me nuts! Anyone know > > how to stop this? > > > > And finally, I quit using K3b. I have a lot less problems with Eroaster > > because it doesn't continually "lose" my devices. I don't have any DVD > > writers, though, just CDRWs, so I don't know if Eroaster even works with > > DVDRW. > > > > e > > Hi Erylon, thanks for the reply. Well, see...it was a working setup that I > had. Then the problem with my /home occurred and I had to reinstall. I > thought I put everything back the way I had it before, but its obvious that > I must not have. > > I use Gcombust here, like it a lot - it works fine with my setup. It does > not support DVDs though. K3b did, until now, after the reinstall. So I > guess I'll just keep playing with it. :-) There is an additional package for K3b called K3B-dvd or some such and you need it to be able to burn DVDs. HTH -- Dennis M. linux user #180842 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] K3b help?
On Sunday 13 March 2005 12:31 pm, Erylon Hines wrote: > You know, I've found that "occasionally" something will monkey with fstab, > and stuff that was working correctly fails to mount, or fails to mount in > the correct place. To allow me to see what has happened, I copy my fstab > as soon as I get everything working, so I can refer back to it when things > go south. (The fstab backup created at changes isn't reliable, because > sometimes I don't notice that stuff isn't working for a while, and several > changes may have been made). K3b seems to be a big offender (as you have > found out). Also, turn off harddrake--you can always turn it back on when > new hardware is added. And sometimes, things seem to happen for no good > reason that I can determine. I thought that I might be the only one, but I > guess not. > > These are the fstab lines for my CD's with Mdk9.2, no scsi emulation on the > reader. If there was, it might make cdrom2 /dev/scd1. > > none /mnt/cdrom supermount > dev=/dev/scd0,fs=udf:iso9660,--,rw,user,iocharset=iso8859-1 0 0 > > none /mnt/cdrom2 supermount > dev=/dev/hdd,fs=udf:iso9660,ro,--,iocharset=iso8859-1 0 0 > > One thing I know, if you unplug a usb device, and don't reboot when you > plug it back in, a second mount point for the same device will be added (my > camera does this continuously), and it drives me nuts! Anyone know how to > stop this? > > And finally, I quit using K3b. I have a lot less problems with Eroaster > because it doesn't continually "lose" my devices. I don't have any DVD > writers, though, just CDRWs, so I don't know if Eroaster even works with > DVDRW. > > e Hi Erylon, thanks for the reply. Well, see...it was a working setup that I had. Then the problem with my /home occurred and I had to reinstall. I thought I put everything back the way I had it before, but its obvious that I must not have. I use Gcombust here, like it a lot - it works fine with my setup. It does not support DVDs though. K3b did, until now, after the reinstall. So I guess I'll just keep playing with it. :-) -- /\ Dark> Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] K3b help?
On Saturday 12 March 2005 08:51 am, Ronald J. Hall wrote: | On Saturday 12 March 2005 02:42 am, Anne Wilson wrote: | > OK - that's out, then. What about the fstab line? It feels a long time | > since I used a 2.4 kernel, so I may be remembering wrongly, but is the | > cdrom really scd1? I would go to MCC > Hardware > Mountpoints and check | > everything there - not forgetting the advanced tab. I usually find that | > fixes any problems I have. | > | > Anne | | No, its really an IDE device (the Toshiba DVD reader at /dev/scd0 is truly | a SCSI device). Before when it was working fine, I had it setup as scd1 in | the /etc/fstab file, so I dunno. | You know, I've found that "occasionally" something will monkey with fstab, and stuff that was working correctly fails to mount, or fails to mount in the correct place. To allow me to see what has happened, I copy my fstab as soon as I get everything working, so I can refer back to it when things go south. (The fstab backup created at changes isn't reliable, because sometimes I don't notice that stuff isn't working for a while, and several changes may have been made). K3b seems to be a big offender (as you have found out). Also, turn off harddrake--you can always turn it back on when new hardware is added. And sometimes, things seem to happen for no good reason that I can determine. I thought that I might be the only one, but I guess not. These are the fstab lines for my CD's with Mdk9.2, no scsi emulation on the reader. If there was, it might make cdrom2 /dev/scd1. none /mnt/cdrom supermount dev=/dev/scd0,fs=udf:iso9660,--,rw,user,iocharset=iso8859-1 0 0 none /mnt/cdrom2 supermount dev=/dev/hdd,fs=udf:iso9660,ro,--,iocharset=iso8859-1 0 0 One thing I know, if you unplug a usb device, and don't reboot when you plug it back in, a second mount point for the same device will be added (my camera does this continuously), and it drives me nuts! Anyone know how to stop this? And finally, I quit using K3b. I have a lot less problems with Eroaster because it doesn't continually "lose" my devices. I don't have any DVD writers, though, just CDRWs, so I don't know if Eroaster even works with DVDRW. e Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] K3b help?
On Saturday 12 March 2005 02:42 am, Anne Wilson wrote: > OK - that's out, then. What about the fstab line? It feels a long time > since I used a 2.4 kernel, so I may be remembering wrongly, but is the > cdrom really scd1? I would go to MCC > Hardware > Mountpoints and check > everything there - not forgetting the advanced tab. I usually find that > fixes any problems I have. > > Anne No, its really an IDE device (the Toshiba DVD reader at /dev/scd0 is truly a SCSI device). Before when it was working fine, I had it setup as scd1 in the /etc/fstab file, so I dunno. MCC shows the burner as scd1,/mnt/cdrom2 and the reader as scd0, /mnt/cdrom which is the way it was before. I guess I'll just keep playing with it. Some magic combination works, although I thought I had set it back to exactly they way I had it before. BTW, the CDRW stuff on it works fine - I burnt some CDs, including disk to disk copying with Gcombust just fine. K3b won't even do that though. Something is up with k3b, something I suppose I don't have set just right, that I did before. Thanks for the reply/suggestions Anne. -- /\ Dark> Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] K3b help?
On Friday 11 Mar 2005 22:44, Ronald J. Hall wrote: > On Friday 11 March 2005 04:46 pm, Anne Wilson wrote: > > On Friday 11 Mar 2005 21:33, Ronald J. Hall wrote: > > > The Plextor is in the master position, secondary IDE channel. > > > It has "hdc=ide-scsi" in /etc/lilo.conf. > > > > Right there if you have a 2.6 kernel, I think. > > > > Anne > > Sorry, should have added: > > Mandrake v9.2 > > kernel 2.4.22-36mdk OK - that's out, then. What about the fstab line? It feels a long time since I used a 2.4 kernel, so I may be remembering wrongly, but is the cdrom really scd1? I would go to MCC > Hardware > Mountpoints and check everything there - not forgetting the advanced tab. I usually find that fixes any problems I have. Anne -- Registered Linux User No.293302 (http://counter.li.org/) Have you visited http://twiki.mdklinuxfaq.org yet? Mandrake at all levels pgpXoD8fBPbLr.pgp Description: PGP signature
Re: [newbie] K3b help?
On Friday 11 March 2005 05:44 pm, Ronald J. Hall wrote: > On Friday 11 March 2005 04:46 pm, Anne Wilson wrote: > > On Friday 11 Mar 2005 21:33, Ronald J. Hall wrote: > > > The Plextor is in the master position, secondary IDE channel. > > > It has "hdc=ide-scsi" in /etc/lilo.conf. > > > > Right there if you have a 2.6 kernel, I think. > > > > Anne > > Sorry, should have added: > > Mandrake v9.2 > > kernel 2.4.22-36mdk and further, here is the error message its giving: System --- K3b Version: 0.11.9 KDE Version: 3.1.3 QT Version: 3.1.2 growisofs --- /dev/scd1: engaging DVD-R DAO upon user request... :-[ PERFORM OPC failed with SK=5h/ASC=2Ch/ACQ=00h]: Input/output error growisofs comand: --- /usr/bin/growisofs -Z /dev/scd1 -use-the-force-luke=notray -use-the-force-luke=tty -use-the-force-luke=dao -speed=4 -gui -graft-points -V K3b data project -volset -A K3B THE CD KREATOR VERSION 0.11.9 (C) 2003 SEBASTIAN TRUEG AND THE K3B TEAM -P -p K3b - Version 0.11.9 -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-darklord/k3bQ2Kytb.tmp -r -hide-list /tmp/kde-darklord/k3bQb8v9b.tmp -l -iso-level 2 -path-list /tmp/kde-darklord/k3bYJVCFa.tmp Thanks again. -- /\ Dark> Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] K3b help?
On Friday 11 March 2005 04:46 pm, Anne Wilson wrote: > On Friday 11 Mar 2005 21:33, Ronald J. Hall wrote: > > The Plextor is in the master position, secondary IDE channel. > > It has "hdc=ide-scsi" in /etc/lilo.conf. > > Right there if you have a 2.6 kernel, I think. > > Anne Sorry, should have added: Mandrake v9.2 kernel 2.4.22-36mdk -- /\ Dark> Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] K3b help?
On Friday 11 Mar 2005 21:33, Ronald J. Hall wrote: > The Plextor is in the master position, secondary IDE channel. > It has "hdc=ide-scsi" in /etc/lilo.conf. > Right there if you have a 2.6 kernel, I think. Anne -- Registered Linux User No.293302 (http://counter.li.org/) Have you visited http://twiki.mdklinuxfaq.org yet? Mandrake at all levels pgpflM1qrnnVq.pgp Description: PGP signature