[Puppet Users] Re: port 8139 not opening up
Thanx a lot.I installed the client version same as server and it worked finr.Thanx a lot On Jan 20, 10:51 am, Ohad Levy wrote: > clients must be equal or older then the server... are you sure your setup is > working? > > On Wed, Jan 20, 2010 at 1:39 PM, lovewadhwa wrote: > > my server being on 0.24.8 and this machine on which port is not > > opening is on 0.25.1 > > > The other client machines on which i have been able to open up the > > port are on 0.24.8. > > Is it because of this that port isn't opening up?Please revert.If > > thats the case will try with version 0.24.8 on client. > > > On Jan 18, 9:03 pm, Dan Bode wrote: > > > what version of puppet are you using? > > > > On Mon, Jan 18, 2010 at 4:20 AM, lovewadhwa > > wrote: > > > > Hi > > > > > I have n't been able to figure out.If puppet developers could help me > > > > out on dis. > > > > > On Jan 13, 9:34 am, lovewadhwa wrote: > > > > > Hi all > > > > > > Please help concerning the problem.Is there any other thing besides " > > > > > listen=true" directive which refrains from the port being opened? > > > > > please help. > > > > > > On Jan 12, 6:00 pm, Ohad Levy wrote: > > > > > > > i think that you need the host fqdn in there, but thats another > > story > > > > :) > > > > > > > On Tue, Jan 12, 2010 at 8:58 PM, lovewadhwa > > > > wrote: > > > > > > > Yes in /etc/puppet, i have namespaceauth.conf which contains > > > > allownace > > > > > > > to all.The entry in namespaceauth.conf file is > > > > > > > > [puppetrunner] > > > > > > > allow * > > > > > > > > On Jan 12, 5:43 pm, Ohad Levy wrote: > > > > > > > > did you setup a namespaceauth file? > > > > > > > > > Ohad > > > > > > > > > On Tue, Jan 12, 2010 at 7:56 PM, lovewadhwa < > > lovewad...@gmail.com> > > > > > > > wrote: > > > > > > > > > Hi all > > > > > > > > > > If anyone please could help me out.I tried everything but > > amn't > > > > > > > > > getting where's the problem. > > > > > > > > > > On Jan 11, 4:03 pm, lovewadhwa wrote: > > > > > > > > > > I had following parameters set in my conf file.When i run > > > > puppetd, it > > > > > > > > > > isn't opening the desired port.I have specified > > "listen=true" > > > > in my > > > > > > > > > > conf file but still the port is n't opening.This is what my > > > > conf file > > > > > > > > > > contains: > > > > > > > > > > > [main] > > > > > > > > > > server = puppet.resdex.com > > > > > > > > > > vardir = /var/lib/puppet > > > > > > > > > > logdir = /var/log/puppet > > > > > > > > > > rundir = /var/run/puppet > > > > > > > > > > ssldir = $vardir/ssl > > > > > > > > > > [puppetd] > > > > > > > > > > classfile = $vardir/classes.txt > > > > > > > > > > localconfig = $vardir/localconfig > > > > > > > > > > listen=true > > > > > > > > > > user = puppet > > > > > > > > > > bindaddress=10.X.X.X > > > > > > > > > > certname=10.X.X.X > > > > > > > > > > > When i start the puppetd with the following command: > > > > > > > > > > > puppetd --no-daemonize --debug --verbose > > > > > > > > > > > it provides me this output > > > > > > > > > > > debug: Failed to load library 'shadow' for feature > > 'libshadow' > > > > > > > > > > debug: Puppet::Type::User::ProviderDirectoryservice: file > > > > /usr/bin/ > > > > > > > > > > dscl does not exist > > > > > > > > > > debug: Puppet::Type::User::ProviderPw: file pw does not > > exist > > > > > > > > > > debug: Puppet::Type::User::ProviderUser_role_add: file > > roledel > > > > does > > > > > > > > > > not exist > > > > > > > > > > debug: Failed to load library 'ldap' for feature 'ldap' > > > > > > > > > > debug: Puppet::Type::User::ProviderLdap: feature ldap is > > > > missing > > > > > > > > > > > I don't see if port not opening has to do anything with > > above > > > > output. > > > > > > > > > > The command runs but the port is not opening.Please help. > > > > > > > > > > -- > > > > > > > > > You received this message because you are subscribed to the > > > > Google > > > > > > > Groups > > > > > > > > > "Puppet Users" group. > > > > > > > > > To post to this group, send email to > > > > puppet-us...@googlegroups.com. > > > > > > > > > To unsubscribe from this group, send email to > > > > > > > > > puppet-users+unsubscr...@googlegroups.com > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > . > > > > > > > > > For more options, visit this group at > > > > > > > > >http://groups.google.com/group/puppet-users?hl=en. > > > > > > > > -- > > > > > > > You received this message because you are subscribed to the > > Google > > > > Groups > > > > > > > "Puppet Users" group. > > > > > > > To post to this group, send email to > > puppet-us...@googlegroups.com. > > > > > > > To unsubscribe from this group, send email to > > > > > > > puppet-users+unsubscr...@googlegroups.com > > > > > > > > > > > > > > > > > . > > > > > > > For more options, visit this group at > > > > > > >http://groups.google.com/group/puppet-users?hl=en. > > > > > -- > > > > You received this mess
[Puppet Users] Re: port 8139 not opening up
Thanx a lot.I installed the client version same as server and it worked finr.Thanx a lot On Jan 20, 10:51 am, Ohad Levy wrote: > clients must be equal or older then the server... are you sure your setup is > working? > > On Wed, Jan 20, 2010 at 1:39 PM, lovewadhwa wrote: > > my server being on 0.24.8 and this machine on which port is not > > opening is on 0.25.1 > > > The other client machines on which i have been able to open up the > > port are on 0.24.8. > > Is it because of this that port isn't opening up?Please revert.If > > thats the case will try with version 0.24.8 on client. > > > On Jan 18, 9:03 pm, Dan Bode wrote: > > > what version of puppet are you using? > > > > On Mon, Jan 18, 2010 at 4:20 AM, lovewadhwa > > wrote: > > > > Hi > > > > > I have n't been able to figure out.If puppet developers could help me > > > > out on dis. > > > > > On Jan 13, 9:34 am, lovewadhwa wrote: > > > > > Hi all > > > > > > Please help concerning the problem.Is there any other thing besides " > > > > > listen=true" directive which refrains from the port being opened? > > > > > please help. > > > > > > On Jan 12, 6:00 pm, Ohad Levy wrote: > > > > > > > i think that you need the host fqdn in there, but thats another > > story > > > > :) > > > > > > > On Tue, Jan 12, 2010 at 8:58 PM, lovewadhwa > > > > wrote: > > > > > > > Yes in /etc/puppet, i have namespaceauth.conf which contains > > > > allownace > > > > > > > to all.The entry in namespaceauth.conf file is > > > > > > > > [puppetrunner] > > > > > > > allow * > > > > > > > > On Jan 12, 5:43 pm, Ohad Levy wrote: > > > > > > > > did you setup a namespaceauth file? > > > > > > > > > Ohad > > > > > > > > > On Tue, Jan 12, 2010 at 7:56 PM, lovewadhwa < > > lovewad...@gmail.com> > > > > > > > wrote: > > > > > > > > > Hi all > > > > > > > > > > If anyone please could help me out.I tried everything but > > amn't > > > > > > > > > getting where's the problem. > > > > > > > > > > On Jan 11, 4:03 pm, lovewadhwa wrote: > > > > > > > > > > I had following parameters set in my conf file.When i run > > > > puppetd, it > > > > > > > > > > isn't opening the desired port.I have specified > > "listen=true" > > > > in my > > > > > > > > > > conf file but still the port is n't opening.This is what my > > > > conf file > > > > > > > > > > contains: > > > > > > > > > > > [main] > > > > > > > > > > server = puppet.resdex.com > > > > > > > > > > vardir = /var/lib/puppet > > > > > > > > > > logdir = /var/log/puppet > > > > > > > > > > rundir = /var/run/puppet > > > > > > > > > > ssldir = $vardir/ssl > > > > > > > > > > [puppetd] > > > > > > > > > > classfile = $vardir/classes.txt > > > > > > > > > > localconfig = $vardir/localconfig > > > > > > > > > > listen=true > > > > > > > > > > user = puppet > > > > > > > > > > bindaddress=10.X.X.X > > > > > > > > > > certname=10.X.X.X > > > > > > > > > > > When i start the puppetd with the following command: > > > > > > > > > > > puppetd --no-daemonize --debug --verbose > > > > > > > > > > > it provides me this output > > > > > > > > > > > debug: Failed to load library 'shadow' for feature > > 'libshadow' > > > > > > > > > > debug: Puppet::Type::User::ProviderDirectoryservice: file > > > > /usr/bin/ > > > > > > > > > > dscl does not exist > > > > > > > > > > debug: Puppet::Type::User::ProviderPw: file pw does not > > exist > > > > > > > > > > debug: Puppet::Type::User::ProviderUser_role_add: file > > roledel > > > > does > > > > > > > > > > not exist > > > > > > > > > > debug: Failed to load library 'ldap' for feature 'ldap' > > > > > > > > > > debug: Puppet::Type::User::ProviderLdap: feature ldap is > > > > missing > > > > > > > > > > > I don't see if port not opening has to do anything with > > above > > > > output. > > > > > > > > > > The command runs but the port is not opening.Please help. > > > > > > > > > > -- > > > > > > > > > You received this message because you are subscribed to the > > > > Google > > > > > > > Groups > > > > > > > > > "Puppet Users" group. > > > > > > > > > To post to this group, send email to > > > > puppet-us...@googlegroups.com. > > > > > > > > > To unsubscribe from this group, send email to > > > > > > > > > puppet-users+unsubscr...@googlegroups.com > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > . > > > > > > > > > For more options, visit this group at > > > > > > > > >http://groups.google.com/group/puppet-users?hl=en. > > > > > > > > -- > > > > > > > You received this message because you are subscribed to the > > Google > > > > Groups > > > > > > > "Puppet Users" group. > > > > > > > To post to this group, send email to > > puppet-us...@googlegroups.com. > > > > > > > To unsubscribe from this group, send email to > > > > > > > puppet-users+unsubscr...@googlegroups.com > > > > > > > > > > > > > > > > > . > > > > > > > For more options, visit this group at > > > > > > >http://groups.google.com/group/puppet-users?hl=en. > > > > > -- > > > > You received this mess
Re: [Puppet Users] Re: port 8139 not opening up
clients must be equal or older then the server... are you sure your setup is working? On Wed, Jan 20, 2010 at 1:39 PM, lovewadhwa wrote: > my server being on 0.24.8 and this machine on which port is not > opening is on 0.25.1 > > The other client machines on which i have been able to open up the > port are on 0.24.8. > Is it because of this that port isn't opening up?Please revert.If > thats the case will try with version 0.24.8 on client. > > > > On Jan 18, 9:03 pm, Dan Bode wrote: > > what version of puppet are you using? > > > > On Mon, Jan 18, 2010 at 4:20 AM, lovewadhwa > wrote: > > > Hi > > > > > I have n't been able to figure out.If puppet developers could help me > > > out on dis. > > > > > On Jan 13, 9:34 am, lovewadhwa wrote: > > > > Hi all > > > > > > Please help concerning the problem.Is there any other thing besides " > > > > listen=true" directive which refrains from the port being opened? > > > > please help. > > > > > > On Jan 12, 6:00 pm, Ohad Levy wrote: > > > > > > > i think that you need the host fqdn in there, but thats another > story > > > :) > > > > > > > On Tue, Jan 12, 2010 at 8:58 PM, lovewadhwa > > > wrote: > > > > > > Yes in /etc/puppet, i have namespaceauth.conf which contains > > > allownace > > > > > > to all.The entry in namespaceauth.conf file is > > > > > > > > [puppetrunner] > > > > > > allow * > > > > > > > > On Jan 12, 5:43 pm, Ohad Levy wrote: > > > > > > > did you setup a namespaceauth file? > > > > > > > > > Ohad > > > > > > > > > On Tue, Jan 12, 2010 at 7:56 PM, lovewadhwa < > lovewad...@gmail.com> > > > > > > wrote: > > > > > > > > Hi all > > > > > > > > > > If anyone please could help me out.I tried everything but > amn't > > > > > > > > getting where's the problem. > > > > > > > > > > On Jan 11, 4:03 pm, lovewadhwa wrote: > > > > > > > > > I had following parameters set in my conf file.When i run > > > puppetd, it > > > > > > > > > isn't opening the desired port.I have specified > "listen=true" > > > in my > > > > > > > > > conf file but still the port is n't opening.This is what my > > > conf file > > > > > > > > > contains: > > > > > > > > > > > [main] > > > > > > > > > server = puppet.resdex.com > > > > > > > > > vardir = /var/lib/puppet > > > > > > > > > logdir = /var/log/puppet > > > > > > > > > rundir = /var/run/puppet > > > > > > > > > ssldir = $vardir/ssl > > > > > > > > > [puppetd] > > > > > > > > > classfile = $vardir/classes.txt > > > > > > > > > localconfig = $vardir/localconfig > > > > > > > > > listen=true > > > > > > > > > user = puppet > > > > > > > > > bindaddress=10.X.X.X > > > > > > > > > certname=10.X.X.X > > > > > > > > > > > When i start the puppetd with the following command: > > > > > > > > > > > puppetd --no-daemonize --debug --verbose > > > > > > > > > > > it provides me this output > > > > > > > > > > > debug: Failed to load library 'shadow' for feature > 'libshadow' > > > > > > > > > debug: Puppet::Type::User::ProviderDirectoryservice: file > > > /usr/bin/ > > > > > > > > > dscl does not exist > > > > > > > > > debug: Puppet::Type::User::ProviderPw: file pw does not > exist > > > > > > > > > debug: Puppet::Type::User::ProviderUser_role_add: file > roledel > > > does > > > > > > > > > not exist > > > > > > > > > debug: Failed to load library 'ldap' for feature 'ldap' > > > > > > > > > debug: Puppet::Type::User::ProviderLdap: feature ldap is > > > missing > > > > > > > > > > > I don't see if port not opening has to do anything with > above > > > output. > > > > > > > > > The command runs but the port is not opening.Please help. > > > > > > > > > > -- > > > > > > > > You received this message because you are subscribed to the > > > Google > > > > > > Groups > > > > > > > > "Puppet Users" group. > > > > > > > > To post to this group, send email to > > > puppet-us...@googlegroups.com. > > > > > > > > To unsubscribe from this group, send email to > > > > > > > > puppet-users+unsubscr...@googlegroups.com > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > . > > > > > > > > For more options, visit this group at > > > > > > > >http://groups.google.com/group/puppet-users?hl=en. > > > > > > > > -- > > > > > > You received this message because you are subscribed to the > Google > > > Groups > > > > > > "Puppet Users" group. > > > > > > To post to this group, send email to > puppet-us...@googlegroups.com. > > > > > > To unsubscribe from this group, send email to > > > > > > puppet-users+unsubscr...@googlegroups.com > > > > > > > > > > > > > > > > > . > > > > > > For more options, visit this group at > > > > > >http://groups.google.com/group/puppet-users?hl=en. > > > > > -- > > > You received this message because you are subscribed to the Google > Groups > > > "Puppet Users" group. > > > To post to this group, send email to puppet-us...@googlegroups.com. > > > To unsubscribe from this group, send email to > > > puppet-users+unsubscr...@googlegroups.com > > > > > > . > > > For more options, visit
[Puppet Users] Re: port 8139 not opening up
my server being on 0.24.8 and this machine on which port is not opening is on 0.25.1 The other client machines on which i have been able to open up the port are on 0.24.8. Is it because of this that port isn't opening up?Please revert.If thats the case will try with version 0.24.8 on client. On Jan 18, 9:03 pm, Dan Bode wrote: > what version of puppet are you using? > > On Mon, Jan 18, 2010 at 4:20 AM, lovewadhwa wrote: > > Hi > > > I have n't been able to figure out.If puppet developers could help me > > out on dis. > > > On Jan 13, 9:34 am, lovewadhwa wrote: > > > Hi all > > > > Please help concerning the problem.Is there any other thing besides " > > > listen=true" directive which refrains from the port being opened? > > > please help. > > > > On Jan 12, 6:00 pm, Ohad Levy wrote: > > > > > i think that you need the host fqdn in there, but thats another story > > :) > > > > > On Tue, Jan 12, 2010 at 8:58 PM, lovewadhwa > > wrote: > > > > > Yes in /etc/puppet, i have namespaceauth.conf which contains > > allownace > > > > > to all.The entry in namespaceauth.conf file is > > > > > > [puppetrunner] > > > > > allow * > > > > > > On Jan 12, 5:43 pm, Ohad Levy wrote: > > > > > > did you setup a namespaceauth file? > > > > > > > Ohad > > > > > > > On Tue, Jan 12, 2010 at 7:56 PM, lovewadhwa > > > > > wrote: > > > > > > > Hi all > > > > > > > > If anyone please could help me out.I tried everything but amn't > > > > > > > getting where's the problem. > > > > > > > > On Jan 11, 4:03 pm, lovewadhwa wrote: > > > > > > > > I had following parameters set in my conf file.When i run > > puppetd, it > > > > > > > > isn't opening the desired port.I have specified "listen=true" > > in my > > > > > > > > conf file but still the port is n't opening.This is what my > > conf file > > > > > > > > contains: > > > > > > > > > [main] > > > > > > > > server = puppet.resdex.com > > > > > > > > vardir = /var/lib/puppet > > > > > > > > logdir = /var/log/puppet > > > > > > > > rundir = /var/run/puppet > > > > > > > > ssldir = $vardir/ssl > > > > > > > > [puppetd] > > > > > > > > classfile = $vardir/classes.txt > > > > > > > > localconfig = $vardir/localconfig > > > > > > > > listen=true > > > > > > > > user = puppet > > > > > > > > bindaddress=10.X.X.X > > > > > > > > certname=10.X.X.X > > > > > > > > > When i start the puppetd with the following command: > > > > > > > > > puppetd --no-daemonize --debug --verbose > > > > > > > > > it provides me this output > > > > > > > > > debug: Failed to load library 'shadow' for feature 'libshadow' > > > > > > > > debug: Puppet::Type::User::ProviderDirectoryservice: file > > /usr/bin/ > > > > > > > > dscl does not exist > > > > > > > > debug: Puppet::Type::User::ProviderPw: file pw does not exist > > > > > > > > debug: Puppet::Type::User::ProviderUser_role_add: file roledel > > does > > > > > > > > not exist > > > > > > > > debug: Failed to load library 'ldap' for feature 'ldap' > > > > > > > > debug: Puppet::Type::User::ProviderLdap: feature ldap is > > missing > > > > > > > > > I don't see if port not opening has to do anything with above > > output. > > > > > > > > The command runs but the port is not opening.Please help. > > > > > > > > -- > > > > > > > You received this message because you are subscribed to the > > Google > > > > > Groups > > > > > > > "Puppet Users" group. > > > > > > > To post to this group, send email to > > puppet-us...@googlegroups.com. > > > > > > > To unsubscribe from this group, send email to > > > > > > > puppet-users+unsubscr...@googlegroups.com > > > > > > > > > > > > > > > > > > . > > > > > > > For more options, visit this group at > > > > > > >http://groups.google.com/group/puppet-users?hl=en. > > > > > > -- > > > > > You received this message because you are subscribed to the Google > > Groups > > > > > "Puppet Users" group. > > > > > To post to this group, send email to puppet-us...@googlegroups.com. > > > > > To unsubscribe from this group, send email to > > > > > puppet-users+unsubscr...@googlegroups.com > > > > > > > > . > > > > > For more options, visit this group at > > > > >http://groups.google.com/group/puppet-users?hl=en. > > > -- > > You received this message because you are subscribed to the Google Groups > > "Puppet Users" group. > > To post to this group, send email to puppet-us...@googlegroups.com. > > To unsubscribe from this group, send email to > > puppet-users+unsubscr...@googlegroups.com > > . > > For more options, visit this group at > >http://groups.google.com/group/puppet-users?hl=en. -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-us...@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
Re: [Puppet Users] Re: port 8139 not opening up
what version of puppet are you using? On Mon, Jan 18, 2010 at 4:20 AM, lovewadhwa wrote: > Hi > > I have n't been able to figure out.If puppet developers could help me > out on dis. > > On Jan 13, 9:34 am, lovewadhwa wrote: > > Hi all > > > > Please help concerning the problem.Is there any other thing besides " > > listen=true" directive which refrains from the port being opened? > > please help. > > > > On Jan 12, 6:00 pm, Ohad Levy wrote: > > > > > i think that you need the host fqdn in there, but thats another story > :) > > > > > On Tue, Jan 12, 2010 at 8:58 PM, lovewadhwa > wrote: > > > > Yes in /etc/puppet, i have namespaceauth.conf which contains > allownace > > > > to all.The entry in namespaceauth.conf file is > > > > > > [puppetrunner] > > > > allow * > > > > > > On Jan 12, 5:43 pm, Ohad Levy wrote: > > > > > did you setup a namespaceauth file? > > > > > > > Ohad > > > > > > > On Tue, Jan 12, 2010 at 7:56 PM, lovewadhwa > > > > wrote: > > > > > > Hi all > > > > > > > > If anyone please could help me out.I tried everything but amn't > > > > > > getting where's the problem. > > > > > > > > On Jan 11, 4:03 pm, lovewadhwa wrote: > > > > > > > I had following parameters set in my conf file.When i run > puppetd, it > > > > > > > isn't opening the desired port.I have specified "listen=true" > in my > > > > > > > conf file but still the port is n't opening.This is what my > conf file > > > > > > > contains: > > > > > > > > > [main] > > > > > > > server = puppet.resdex.com > > > > > > > vardir = /var/lib/puppet > > > > > > > logdir = /var/log/puppet > > > > > > > rundir = /var/run/puppet > > > > > > > ssldir = $vardir/ssl > > > > > > > [puppetd] > > > > > > > classfile = $vardir/classes.txt > > > > > > > localconfig = $vardir/localconfig > > > > > > > listen=true > > > > > > > user = puppet > > > > > > > bindaddress=10.X.X.X > > > > > > > certname=10.X.X.X > > > > > > > > > When i start the puppetd with the following command: > > > > > > > > > puppetd --no-daemonize --debug --verbose > > > > > > > > > it provides me this output > > > > > > > > > debug: Failed to load library 'shadow' for feature 'libshadow' > > > > > > > debug: Puppet::Type::User::ProviderDirectoryservice: file > /usr/bin/ > > > > > > > dscl does not exist > > > > > > > debug: Puppet::Type::User::ProviderPw: file pw does not exist > > > > > > > debug: Puppet::Type::User::ProviderUser_role_add: file roledel > does > > > > > > > not exist > > > > > > > debug: Failed to load library 'ldap' for feature 'ldap' > > > > > > > debug: Puppet::Type::User::ProviderLdap: feature ldap is > missing > > > > > > > > > I don't see if port not opening has to do anything with above > output. > > > > > > > The command runs but the port is not opening.Please help. > > > > > > > > -- > > > > > > You received this message because you are subscribed to the > Google > > > > Groups > > > > > > "Puppet Users" group. > > > > > > To post to this group, send email to > puppet-us...@googlegroups.com. > > > > > > To unsubscribe from this group, send email to > > > > > > puppet-users+unsubscr...@googlegroups.com > > > > > > > > > > > > > > > > > > . > > > > > > For more options, visit this group at > > > > > >http://groups.google.com/group/puppet-users?hl=en. > > > > > > -- > > > > You received this message because you are subscribed to the Google > Groups > > > > "Puppet Users" group. > > > > To post to this group, send email to puppet-us...@googlegroups.com. > > > > To unsubscribe from this group, send email to > > > > puppet-users+unsubscr...@googlegroups.com > > > > > > > . > > > > For more options, visit this group at > > > >http://groups.google.com/group/puppet-users?hl=en. > > -- > You received this message because you are subscribed to the Google Groups > "Puppet Users" group. > To post to this group, send email to puppet-us...@googlegroups.com. > To unsubscribe from this group, send email to > puppet-users+unsubscr...@googlegroups.com > . > For more options, visit this group at > http://groups.google.com/group/puppet-users?hl=en. > > > > -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-us...@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
[Puppet Users] Re: port 8139 not opening up
Hi I have n't been able to figure out.If puppet developers could help me out on dis. On Jan 13, 9:34 am, lovewadhwa wrote: > Hi all > > Please help concerning the problem.Is there any other thing besides " > listen=true" directive which refrains from the port being opened? > please help. > > On Jan 12, 6:00 pm, Ohad Levy wrote: > > > i think that you need the host fqdn in there, but thats another story :) > > > On Tue, Jan 12, 2010 at 8:58 PM, lovewadhwa wrote: > > > Yes in /etc/puppet, i have namespaceauth.conf which contains allownace > > > to all.The entry in namespaceauth.conf file is > > > > [puppetrunner] > > > allow * > > > > On Jan 12, 5:43 pm, Ohad Levy wrote: > > > > did you setup a namespaceauth file? > > > > > Ohad > > > > > On Tue, Jan 12, 2010 at 7:56 PM, lovewadhwa > > > wrote: > > > > > Hi all > > > > > > If anyone please could help me out.I tried everything but amn't > > > > > getting where's the problem. > > > > > > On Jan 11, 4:03 pm, lovewadhwa wrote: > > > > > > I had following parameters set in my conf file.When i run puppetd, > > > > > > it > > > > > > isn't opening the desired port.I have specified "listen=true" in my > > > > > > conf file but still the port is n't opening.This is what my conf > > > > > > file > > > > > > contains: > > > > > > > [main] > > > > > > server = puppet.resdex.com > > > > > > vardir = /var/lib/puppet > > > > > > logdir = /var/log/puppet > > > > > > rundir = /var/run/puppet > > > > > > ssldir = $vardir/ssl > > > > > > [puppetd] > > > > > > classfile = $vardir/classes.txt > > > > > > localconfig = $vardir/localconfig > > > > > > listen=true > > > > > > user = puppet > > > > > > bindaddress=10.X.X.X > > > > > > certname=10.X.X.X > > > > > > > When i start the puppetd with the following command: > > > > > > > puppetd --no-daemonize --debug --verbose > > > > > > > it provides me this output > > > > > > > debug: Failed to load library 'shadow' for feature 'libshadow' > > > > > > debug: Puppet::Type::User::ProviderDirectoryservice: file /usr/bin/ > > > > > > dscl does not exist > > > > > > debug: Puppet::Type::User::ProviderPw: file pw does not exist > > > > > > debug: Puppet::Type::User::ProviderUser_role_add: file roledel does > > > > > > not exist > > > > > > debug: Failed to load library 'ldap' for feature 'ldap' > > > > > > debug: Puppet::Type::User::ProviderLdap: feature ldap is missing > > > > > > > I don't see if port not opening has to do anything with above > > > > > > output. > > > > > > The command runs but the port is not opening.Please help. > > > > > > -- > > > > > You received this message because you are subscribed to the Google > > > Groups > > > > > "Puppet Users" group. > > > > > To post to this group, send email to puppet-us...@googlegroups.com. > > > > > To unsubscribe from this group, send email to > > > > > puppet-users+unsubscr...@googlegroups.com > > > > > > > > > . > > > > > For more options, visit this group at > > > > >http://groups.google.com/group/puppet-users?hl=en. > > > > -- > > > You received this message because you are subscribed to the Google Groups > > > "Puppet Users" group. > > > To post to this group, send email to puppet-us...@googlegroups.com. > > > To unsubscribe from this group, send email to > > > puppet-users+unsubscr...@googlegroups.com > > > . > > > For more options, visit this group at > > >http://groups.google.com/group/puppet-users?hl=en. -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-us...@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
[Puppet Users] Re: port 8139 not opening up
Hi I have n't been able to figure out.If puppet developers could help me out on dis. On Jan 13, 9:34 am, lovewadhwa wrote: > Hi all > > Please help concerning the problem.Is there any other thing besides " > listen=true" directive which refrains from the port being opened? > please help. > > On Jan 12, 6:00 pm, Ohad Levy wrote: > > > i think that you need the host fqdn in there, but thats another story :) > > > On Tue, Jan 12, 2010 at 8:58 PM, lovewadhwa wrote: > > > Yes in /etc/puppet, i have namespaceauth.conf which contains allownace > > > to all.The entry in namespaceauth.conf file is > > > > [puppetrunner] > > > allow * > > > > On Jan 12, 5:43 pm, Ohad Levy wrote: > > > > did you setup a namespaceauth file? > > > > > Ohad > > > > > On Tue, Jan 12, 2010 at 7:56 PM, lovewadhwa > > > wrote: > > > > > Hi all > > > > > > If anyone please could help me out.I tried everything but amn't > > > > > getting where's the problem. > > > > > > On Jan 11, 4:03 pm, lovewadhwa wrote: > > > > > > I had following parameters set in my conf file.When i run puppetd, > > > > > > it > > > > > > isn't opening the desired port.I have specified "listen=true" in my > > > > > > conf file but still the port is n't opening.This is what my conf > > > > > > file > > > > > > contains: > > > > > > > [main] > > > > > > server = puppet.resdex.com > > > > > > vardir = /var/lib/puppet > > > > > > logdir = /var/log/puppet > > > > > > rundir = /var/run/puppet > > > > > > ssldir = $vardir/ssl > > > > > > [puppetd] > > > > > > classfile = $vardir/classes.txt > > > > > > localconfig = $vardir/localconfig > > > > > > listen=true > > > > > > user = puppet > > > > > > bindaddress=10.X.X.X > > > > > > certname=10.X.X.X > > > > > > > When i start the puppetd with the following command: > > > > > > > puppetd --no-daemonize --debug --verbose > > > > > > > it provides me this output > > > > > > > debug: Failed to load library 'shadow' for feature 'libshadow' > > > > > > debug: Puppet::Type::User::ProviderDirectoryservice: file /usr/bin/ > > > > > > dscl does not exist > > > > > > debug: Puppet::Type::User::ProviderPw: file pw does not exist > > > > > > debug: Puppet::Type::User::ProviderUser_role_add: file roledel does > > > > > > not exist > > > > > > debug: Failed to load library 'ldap' for feature 'ldap' > > > > > > debug: Puppet::Type::User::ProviderLdap: feature ldap is missing > > > > > > > I don't see if port not opening has to do anything with above > > > > > > output. > > > > > > The command runs but the port is not opening.Please help. > > > > > > -- > > > > > You received this message because you are subscribed to the Google > > > Groups > > > > > "Puppet Users" group. > > > > > To post to this group, send email to puppet-us...@googlegroups.com. > > > > > To unsubscribe from this group, send email to > > > > > puppet-users+unsubscr...@googlegroups.com > > > > > > > > > . > > > > > For more options, visit this group at > > > > >http://groups.google.com/group/puppet-users?hl=en. > > > > -- > > > You received this message because you are subscribed to the Google Groups > > > "Puppet Users" group. > > > To post to this group, send email to puppet-us...@googlegroups.com. > > > To unsubscribe from this group, send email to > > > puppet-users+unsubscr...@googlegroups.com > > > . > > > For more options, visit this group at > > >http://groups.google.com/group/puppet-users?hl=en. -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-us...@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
[Puppet Users] Re: port 8139 not opening up
Hi all Please help concerning the problem.Is there any other thing besides " listen=true" directive which refrains from the port being opened? please help. On Jan 12, 6:00 pm, Ohad Levy wrote: > i think that you need the host fqdn in there, but thats another story :) > > On Tue, Jan 12, 2010 at 8:58 PM, lovewadhwa wrote: > > Yes in /etc/puppet, i have namespaceauth.conf which contains allownace > > to all.The entry in namespaceauth.conf file is > > > [puppetrunner] > > allow * > > > On Jan 12, 5:43 pm, Ohad Levy wrote: > > > did you setup a namespaceauth file? > > > > Ohad > > > > On Tue, Jan 12, 2010 at 7:56 PM, lovewadhwa > > wrote: > > > > Hi all > > > > > If anyone please could help me out.I tried everything but amn't > > > > getting where's the problem. > > > > > On Jan 11, 4:03 pm, lovewadhwa wrote: > > > > > I had following parameters set in my conf file.When i run puppetd, it > > > > > isn't opening the desired port.I have specified "listen=true" in my > > > > > conf file but still the port is n't opening.This is what my conf file > > > > > contains: > > > > > > [main] > > > > > server = puppet.resdex.com > > > > > vardir = /var/lib/puppet > > > > > logdir = /var/log/puppet > > > > > rundir = /var/run/puppet > > > > > ssldir = $vardir/ssl > > > > > [puppetd] > > > > > classfile = $vardir/classes.txt > > > > > localconfig = $vardir/localconfig > > > > > listen=true > > > > > user = puppet > > > > > bindaddress=10.X.X.X > > > > > certname=10.X.X.X > > > > > > When i start the puppetd with the following command: > > > > > > puppetd --no-daemonize --debug --verbose > > > > > > it provides me this output > > > > > > debug: Failed to load library 'shadow' for feature 'libshadow' > > > > > debug: Puppet::Type::User::ProviderDirectoryservice: file /usr/bin/ > > > > > dscl does not exist > > > > > debug: Puppet::Type::User::ProviderPw: file pw does not exist > > > > > debug: Puppet::Type::User::ProviderUser_role_add: file roledel does > > > > > not exist > > > > > debug: Failed to load library 'ldap' for feature 'ldap' > > > > > debug: Puppet::Type::User::ProviderLdap: feature ldap is missing > > > > > > I don't see if port not opening has to do anything with above output. > > > > > The command runs but the port is not opening.Please help. > > > > > -- > > > > You received this message because you are subscribed to the Google > > Groups > > > > "Puppet Users" group. > > > > To post to this group, send email to puppet-us...@googlegroups.com. > > > > To unsubscribe from this group, send email to > > > > puppet-users+unsubscr...@googlegroups.com > > > > > > > . > > > > For more options, visit this group at > > > >http://groups.google.com/group/puppet-users?hl=en. > > > -- > > You received this message because you are subscribed to the Google Groups > > "Puppet Users" group. > > To post to this group, send email to puppet-us...@googlegroups.com. > > To unsubscribe from this group, send email to > > puppet-users+unsubscr...@googlegroups.com > > . > > For more options, visit this group at > >http://groups.google.com/group/puppet-users?hl=en. -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-us...@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
Re: [Puppet Users] Re: port 8139 not opening up
i think that you need the host fqdn in there, but thats another story :) On Tue, Jan 12, 2010 at 8:58 PM, lovewadhwa wrote: > Yes in /etc/puppet, i have namespaceauth.conf which contains allownace > to all.The entry in namespaceauth.conf file is > > [puppetrunner] > allow * > > > > On Jan 12, 5:43 pm, Ohad Levy wrote: > > did you setup a namespaceauth file? > > > > Ohad > > > > On Tue, Jan 12, 2010 at 7:56 PM, lovewadhwa > wrote: > > > Hi all > > > > > If anyone please could help me out.I tried everything but amn't > > > getting where's the problem. > > > > > On Jan 11, 4:03 pm, lovewadhwa wrote: > > > > I had following parameters set in my conf file.When i run puppetd, it > > > > isn't opening the desired port.I have specified "listen=true" in my > > > > conf file but still the port is n't opening.This is what my conf file > > > > contains: > > > > > > [main] > > > > server = puppet.resdex.com > > > > vardir = /var/lib/puppet > > > > logdir = /var/log/puppet > > > > rundir = /var/run/puppet > > > > ssldir = $vardir/ssl > > > > [puppetd] > > > > classfile = $vardir/classes.txt > > > > localconfig = $vardir/localconfig > > > > listen=true > > > > user = puppet > > > > bindaddress=10.X.X.X > > > > certname=10.X.X.X > > > > > > When i start the puppetd with the following command: > > > > > > puppetd --no-daemonize --debug --verbose > > > > > > it provides me this output > > > > > > debug: Failed to load library 'shadow' for feature 'libshadow' > > > > debug: Puppet::Type::User::ProviderDirectoryservice: file /usr/bin/ > > > > dscl does not exist > > > > debug: Puppet::Type::User::ProviderPw: file pw does not exist > > > > debug: Puppet::Type::User::ProviderUser_role_add: file roledel does > > > > not exist > > > > debug: Failed to load library 'ldap' for feature 'ldap' > > > > debug: Puppet::Type::User::ProviderLdap: feature ldap is missing > > > > > > I don't see if port not opening has to do anything with above output. > > > > The command runs but the port is not opening.Please help. > > > > > -- > > > You received this message because you are subscribed to the Google > Groups > > > "Puppet Users" group. > > > To post to this group, send email to puppet-us...@googlegroups.com. > > > To unsubscribe from this group, send email to > > > puppet-users+unsubscr...@googlegroups.com > > > > > > . > > > For more options, visit this group at > > >http://groups.google.com/group/puppet-users?hl=en. > > -- > You received this message because you are subscribed to the Google Groups > "Puppet Users" group. > To post to this group, send email to puppet-us...@googlegroups.com. > To unsubscribe from this group, send email to > puppet-users+unsubscr...@googlegroups.com > . > For more options, visit this group at > http://groups.google.com/group/puppet-users?hl=en. > > > > -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-us...@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
[Puppet Users] Re: port 8139 not opening up
Yes in /etc/puppet, i have namespaceauth.conf which contains allownace to all.The entry in namespaceauth.conf file is [puppetrunner] allow * On Jan 12, 5:43 pm, Ohad Levy wrote: > did you setup a namespaceauth file? > > Ohad > > On Tue, Jan 12, 2010 at 7:56 PM, lovewadhwa wrote: > > Hi all > > > If anyone please could help me out.I tried everything but amn't > > getting where's the problem. > > > On Jan 11, 4:03 pm, lovewadhwa wrote: > > > I had following parameters set in my conf file.When i run puppetd, it > > > isn't opening the desired port.I have specified "listen=true" in my > > > conf file but still the port is n't opening.This is what my conf file > > > contains: > > > > [main] > > > server = puppet.resdex.com > > > vardir = /var/lib/puppet > > > logdir = /var/log/puppet > > > rundir = /var/run/puppet > > > ssldir = $vardir/ssl > > > [puppetd] > > > classfile = $vardir/classes.txt > > > localconfig = $vardir/localconfig > > > listen=true > > > user = puppet > > > bindaddress=10.X.X.X > > > certname=10.X.X.X > > > > When i start the puppetd with the following command: > > > > puppetd --no-daemonize --debug --verbose > > > > it provides me this output > > > > debug: Failed to load library 'shadow' for feature 'libshadow' > > > debug: Puppet::Type::User::ProviderDirectoryservice: file /usr/bin/ > > > dscl does not exist > > > debug: Puppet::Type::User::ProviderPw: file pw does not exist > > > debug: Puppet::Type::User::ProviderUser_role_add: file roledel does > > > not exist > > > debug: Failed to load library 'ldap' for feature 'ldap' > > > debug: Puppet::Type::User::ProviderLdap: feature ldap is missing > > > > I don't see if port not opening has to do anything with above output. > > > The command runs but the port is not opening.Please help. > > > -- > > You received this message because you are subscribed to the Google Groups > > "Puppet Users" group. > > To post to this group, send email to puppet-us...@googlegroups.com. > > To unsubscribe from this group, send email to > > puppet-users+unsubscr...@googlegroups.com > > . > > For more options, visit this group at > >http://groups.google.com/group/puppet-users?hl=en. -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-us...@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
Re: [Puppet Users] Re: port 8139 not opening up
did you setup a namespaceauth file? Ohad On Tue, Jan 12, 2010 at 7:56 PM, lovewadhwa wrote: > Hi all > > If anyone please could help me out.I tried everything but amn't > getting where's the problem. > > On Jan 11, 4:03 pm, lovewadhwa wrote: > > I had following parameters set in my conf file.When i run puppetd, it > > isn't opening the desired port.I have specified "listen=true" in my > > conf file but still the port is n't opening.This is what my conf file > > contains: > > > > [main] > > server = puppet.resdex.com > > vardir = /var/lib/puppet > > logdir = /var/log/puppet > > rundir = /var/run/puppet > > ssldir = $vardir/ssl > > [puppetd] > > classfile = $vardir/classes.txt > > localconfig = $vardir/localconfig > > listen=true > > user = puppet > > bindaddress=10.X.X.X > > certname=10.X.X.X > > > > When i start the puppetd with the following command: > > > > puppetd --no-daemonize --debug --verbose > > > > it provides me this output > > > > debug: Failed to load library 'shadow' for feature 'libshadow' > > debug: Puppet::Type::User::ProviderDirectoryservice: file /usr/bin/ > > dscl does not exist > > debug: Puppet::Type::User::ProviderPw: file pw does not exist > > debug: Puppet::Type::User::ProviderUser_role_add: file roledel does > > not exist > > debug: Failed to load library 'ldap' for feature 'ldap' > > debug: Puppet::Type::User::ProviderLdap: feature ldap is missing > > > > I don't see if port not opening has to do anything with above output. > > The command runs but the port is not opening.Please help. > > -- > You received this message because you are subscribed to the Google Groups > "Puppet Users" group. > To post to this group, send email to puppet-us...@googlegroups.com. > To unsubscribe from this group, send email to > puppet-users+unsubscr...@googlegroups.com > . > For more options, visit this group at > http://groups.google.com/group/puppet-users?hl=en. > > > > -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-us...@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
[Puppet Users] Re: port 8139 not opening up
Hi all If anyone please could help me out.I tried everything but amn't getting where's the problem. On Jan 11, 4:03 pm, lovewadhwa wrote: > I had following parameters set in my conf file.When i run puppetd, it > isn't opening the desired port.I have specified "listen=true" in my > conf file but still the port is n't opening.This is what my conf file > contains: > > [main] > server = puppet.resdex.com > vardir = /var/lib/puppet > logdir = /var/log/puppet > rundir = /var/run/puppet > ssldir = $vardir/ssl > [puppetd] > classfile = $vardir/classes.txt > localconfig = $vardir/localconfig > listen=true > user = puppet > bindaddress=10.X.X.X > certname=10.X.X.X > > When i start the puppetd with the following command: > > puppetd --no-daemonize --debug --verbose > > it provides me this output > > debug: Failed to load library 'shadow' for feature 'libshadow' > debug: Puppet::Type::User::ProviderDirectoryservice: file /usr/bin/ > dscl does not exist > debug: Puppet::Type::User::ProviderPw: file pw does not exist > debug: Puppet::Type::User::ProviderUser_role_add: file roledel does > not exist > debug: Failed to load library 'ldap' for feature 'ldap' > debug: Puppet::Type::User::ProviderLdap: feature ldap is missing > > I don't see if port not opening has to do anything with above output. > The command runs but the port is not opening.Please help. -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-us...@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
