Re: [time-nuts] Datum TS-2100 firmware updating
Hi Dick, I chked already and found satis.but what current load shall I chk and what is the nominal voltage?? Rgds Ernie. -Original Message- From: Richard W. Solomon To: Discussion of precise time and frequency measurement Sent: Mon, Jun 28, 2010 6:03 pm Subject: Re: [time-nuts] Datum TS-2100 firmware updating Check the on-board battery. It may not be up to spec. Good luck on changing it ... True-Time could not have ade it more difficult. 73, Dick, W1KSZ Original Message- From: erniepe...@aol.com Sent: Jun 28, 2010 4:43 AM To: time-nuts@febo.com Subject: Re: [time-nuts] Datum TS-2100 firmware updating HI Julien, Do you have a detailed info, docu about the TrueTime XL-DC?? I have 2ea of this unit and one is not going to lock... Any experience or help appreciated. Rgds Ernie. -Original Message- From: Julien Goodwin To: time-nuts@febo.com Sent: Mon, Jun 28, 2010 1:36 pm Subject: [time-nuts] Datum TS-2100 firmware updating As a first post I thought I'd share a success story. After a lot of flailing about the magic combination to upgrade a TS-2100 rom old/ROM firmware appears to be to ensure the line endings on the ile match that of the TFTP host. While it is twitchy about ethernet as ong as there's no contention it's probably fine. Serial updates I just couldn't make work. Up next is to convert the darn thing to Rubidium, like it was meant to e when I purchased it (insert rant here). Other toys are a TrueTime XL-DC and Trimble Palisade, along with a rueTime IRIG-B display. Thanks, ulien ___ ime-nuts mailing list -- time-nuts@febo.com o unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts nd follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. __ ime-nuts mailing list -- time-nuts@febo.com o unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts nd follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Datum TS-2100 firmware updating
Check the on-board battery. It may not be up to spec. Good luck on changing it ... True-Time could not have made it more difficult. 73, Dick, W1KSZ -Original Message- >From: erniepe...@aol.com >Sent: Jun 28, 2010 4:43 AM >To: time-nuts@febo.com >Subject: Re: [time-nuts] Datum TS-2100 firmware updating > > >HI Julien, > >Do you have a detailed info, docu about the TrueTime XL-DC?? > >I have 2ea of this unit and one is not going to lock... >Any experience or help appreciated. > >Rgds Ernie. > > > > > > > >-Original Message- >From: Julien Goodwin >To: time-nuts@febo.com >Sent: Mon, Jun 28, 2010 1:36 pm >Subject: [time-nuts] Datum TS-2100 firmware updating > > >As a first post I thought I'd share a success story. >After a lot of flailing about the magic combination to upgrade a TS-2100 >rom old/ROM firmware appears to be to ensure the line endings on the >ile match that of the TFTP host. While it is twitchy about ethernet as >ong as there's no contention it's probably fine. >Serial updates I just couldn't make work. >Up next is to convert the darn thing to Rubidium, like it was meant to >e when I purchased it (insert rant here). >Other toys are a TrueTime XL-DC and Trimble Palisade, along with a >rueTime IRIG-B display. >Thanks, >ulien >___ >ime-nuts mailing list -- time-nuts@febo.com >o unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >nd follow the instructions there. > >___ >time-nuts mailing list -- time-nuts@febo.com >To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Datum TS-2100 firmware updating
Hi, Ok, I have the info from the web but it is not too much. I got GPS data but seems to me that the ECF is out of limit? and the digital word is not changing...frozen but sometime very seldom it is locked properly after tickling a few hrs.then no luck for the next few weeks I have the original active antenna with about 46dB gain and the GPS is OK but the digital control part has problem. Rgds Ernie. -Original Message- From: jimlux To: Discussion of precise time and frequency measurement Sent: Mon, Jun 28, 2010 3:10 pm Subject: Re: [time-nuts] Datum TS-2100 firmware updating erniepe...@aol.com wrote: > HI Julien, > > Do you have a detailed info, docu about the TrueTime XL-DC?? > > I have 2ea of this unit and one is not going to lock... > Any experience or help appreciated. > > Rgds Ernie. > > There's a fair amount of info on the XL-DC on the web. I assume your > > problem is that it's not getting GPS lock? Is it getting ANY GPS data? (it > > can take quite a while if it doesn't know where it is and has no almanac > > data) ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Datum TS-2100 firmware updating
erniepe...@aol.com wrote: HI Julien, Do you have a detailed info, docu about the TrueTime XL-DC?? I have 2ea of this unit and one is not going to lock... Any experience or help appreciated. Rgds Ernie. There's a fair amount of info on the XL-DC on the web. I assume your problem is that it's not getting GPS lock? Is it getting ANY GPS data? (it can take quite a while if it doesn't know where it is and has no almanac data) ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Datum TS-2100 firmware updating
HI Julien, Do you have a detailed info, docu about the TrueTime XL-DC?? I have 2ea of this unit and one is not going to lock... Any experience or help appreciated. Rgds Ernie. -Original Message- From: Julien Goodwin To: time-nuts@febo.com Sent: Mon, Jun 28, 2010 1:36 pm Subject: [time-nuts] Datum TS-2100 firmware updating As a first post I thought I'd share a success story. After a lot of flailing about the magic combination to upgrade a TS-2100 rom old/ROM firmware appears to be to ensure the line endings on the ile match that of the TFTP host. While it is twitchy about ethernet as ong as there's no contention it's probably fine. Serial updates I just couldn't make work. Up next is to convert the darn thing to Rubidium, like it was meant to e when I purchased it (insert rant here). Other toys are a TrueTime XL-DC and Trimble Palisade, along with a rueTime IRIG-B display. Thanks, ulien ___ ime-nuts mailing list -- time-nuts@febo.com o unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts nd follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
[time-nuts] Datum TS-2100 firmware updating
As a first post I thought I'd share a success story. After a lot of flailing about the magic combination to upgrade a TS-2100 from old/ROM firmware appears to be to ensure the line endings on the file match that of the TFTP host. While it is twitchy about ethernet as long as there's no contention it's probably fine. Serial updates I just couldn't make work. Up next is to convert the darn thing to Rubidium, like it was meant to be when I purchased it (insert rant here). Other toys are a TrueTime XL-DC and Trimble Palisade, along with a TrueTime IRIG-B display. Thanks, Julien ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.