Re: Url-Parameters only set once
--- me <[EMAIL PROTECTED]> wrote: > Yes of course that's what I thougt. But when I change the scope of the > spring bean to default I could provide the id using a get request but > nothing happens. > > Now I keep it on prototype which is okay for this page. S2 assumes a new action will be created for every request... Not doing so is almost certainly a Bad Idea. I'm sure it's possible, but it runs contrary to everything the framework assumes about application structure. Dave - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Url-Parameters only set once
Yes of course that's what I thougt. But when I change the scope of the spring bean to default I could provide the id using a get request but nothing happens. Now I keep it on prototype which is okay for this page. Marc Eric Nelson schrieb: You CAN set the property to a different value every time. Most of my action beans implement this behavior just fine. Did you make sure your action bean implements the ParameterAware interface? This binds your action bean properties to the current values in the request scope. --Eric -Original Message- From: Marc Ende [mailto:[EMAIL PROTECTED] Sent: Sunday, April 06, 2008 1:19 PM To: Struts Users Mailing List Subject: Re: Url-Parameters only set once Hello Dave, I've found a solution for that. The spring-action was standard-scoped and in cause of that it didn't accept the id parameter a second time. I think it's a little bit strange that it's impossible to set an property again when it's done before. Marc Dave Newton schrieb: --- Marc Ende <[EMAIL PROTECTED]> wrote: I've got a list with several items which are linked to a details-action. If I klick on an item after the restart of the webapp a link like http://.../details.action?id=123 is called. Everything is fine. I can see the correct details site. When I go back and klick on another item (with another id) the old id is called from the database and shown. Without any further info it's hard to say what the problem might be. Actions are instantiated per-request, unless you've mis-configured a Spring-defined action. Depending on how you're creating the links (and how your application is laid out) you may be getting URL parameters you're not expecting in your link; has an "includeParams" attribute you might want to look at. I'm sure there are more possibilities, but we might need more info in order to help. Dave - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: Url-Parameters only set once
Ah, you're right. Thanks for the correction. --Eric -Original Message- From: Dave Newton [mailto:[EMAIL PROTECTED] Sent: Monday, April 07, 2008 9:29 AM To: Struts Users Mailing List Subject: RE: Url-Parameters only set once --- Eric Nelson <[EMAIL PROTECTED]> wrote: > You CAN set the property to a different value every time. Most of my > action beans implement this behavior just fine. Did you make sure your > action bean implements the ParameterAware interface? This binds your > action bean properties to the current values in the request scope. Just for completeness, ParameterAware is for getting the map of parameters, not for binding those parameters to action properties. Dave - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: Url-Parameters only set once
--- Eric Nelson <[EMAIL PROTECTED]> wrote: > You CAN set the property to a different value every time. Most of my > action beans implement this behavior just fine. Did you make sure your > action bean implements the ParameterAware interface? This binds your > action bean properties to the current values in the request scope. Just for completeness, ParameterAware is for getting the map of parameters, not for binding those parameters to action properties. Dave - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: Url-Parameters only set once
You CAN set the property to a different value every time. Most of my action beans implement this behavior just fine. Did you make sure your action bean implements the ParameterAware interface? This binds your action bean properties to the current values in the request scope. --Eric -Original Message- From: Marc Ende [mailto:[EMAIL PROTECTED] Sent: Sunday, April 06, 2008 1:19 PM To: Struts Users Mailing List Subject: Re: Url-Parameters only set once Hello Dave, I've found a solution for that. The spring-action was standard-scoped and in cause of that it didn't accept the id parameter a second time. I think it's a little bit strange that it's impossible to set an property again when it's done before. Marc Dave Newton schrieb: > --- Marc Ende <[EMAIL PROTECTED]> wrote: > >> I've got a list with several items which are linked to a details-action. >> If I klick on an item after the restart of the webapp a link like >> http://.../details.action?id=123 >> is called. Everything is fine. I can see the correct details site. >> When I go back and klick on another item (with another id) >> the old id is called from the database and shown. >> > > Without any further info it's hard to say what the problem might be. > > Actions are instantiated per-request, unless you've mis-configured a > Spring-defined action. > > Depending on how you're creating the links (and how your application is laid > out) you may be getting URL parameters you're not expecting in your link; > has an "includeParams" attribute you might want to look at. > > I'm sure there are more possibilities, but we might need more info in order > to help. > > Dave > > > > - > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Url-Parameters only set once
Hello Dave, I've found a solution for that. The spring-action was standard-scoped and in cause of that it didn't accept the id parameter a second time. I think it's a little bit strange that it's impossible to set an property again when it's done before. Marc Dave Newton schrieb: --- Marc Ende <[EMAIL PROTECTED]> wrote: I've got a list with several items which are linked to a details-action. If I klick on an item after the restart of the webapp a link like http://.../details.action?id=123 is called. Everything is fine. I can see the correct details site. When I go back and klick on another item (with another id) the old id is called from the database and shown. Without any further info it's hard to say what the problem might be. Actions are instantiated per-request, unless you've mis-configured a Spring-defined action. Depending on how you're creating the links (and how your application is laid out) you may be getting URL parameters you're not expecting in your link; has an "includeParams" attribute you might want to look at. I'm sure there are more possibilities, but we might need more info in order to help. Dave - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Url-Parameters only set once
--- Marc Ende <[EMAIL PROTECTED]> wrote: > I've got a list with several items which are linked to a details-action. > If I klick on an item after the restart of the webapp a link like > http://.../details.action?id=123 > is called. Everything is fine. I can see the correct details site. > When I go back and klick on another item (with another id) > the old id is called from the database and shown. Without any further info it's hard to say what the problem might be. Actions are instantiated per-request, unless you've mis-configured a Spring-defined action. Depending on how you're creating the links (and how your application is laid out) you may be getting URL parameters you're not expecting in your link; has an "includeParams" attribute you might want to look at. I'm sure there are more possibilities, but we might need more info in order to help. Dave - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Url-Parameters only set once
Hi, I've got a list with several items which are linked to a details-action. If I klick on an item after the restart of the webapp a link like http://.../details.action?id=123 is called. Everything is fine. I can see the correct details site. When I go back and klick on another item (with another id) the old id is called from the database and shown. Within the action I've declared an private String id; with the getters and setters. The logic (retrieval data from the database) is done in the execute method. Is there any caching or do I have to set id manually to null? Or do I have to do the processing in the prepare-method? Thanks for your help Marc - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
