On Thu, 2004-02-05 at 21:06, kevin ernste wrote:
> > It seems to me that the Multiface is more extensible than the Delta
> > 1010. And of course it has more ways to connect to other devices. But
> > then it's a lot more expensive ($920 vs. $600).
>
> I think your instinct is right on. Do you see
--- Florin Andrei <[EMAIL PROTECTED]> wrote:
> On Thu, 2004-02-05 at 13:37, kevin ernste wrote:
>
> > Other than the concerns I listed, I am very happy with the 1010 in
> > linux. The only box I have liked as much is the HDSP mentioned
> above,
> > but it's more expensive and doesn't sound as go
> It seems to me that the Multiface is more extensible than the Delta
> 1010. And of course it has more ways to connect to other devices. But
> then it's a lot more expensive ($920 vs. $600).
I think your instinct is right on. Do you see yourself wanting to use
this rig remotely? The cardbus ad
On Thu, 2004-02-05 at 13:37, kevin ernste wrote:
> Other than the concerns I listed, I am very happy with the 1010 in
> linux. The only box I have liked as much is the HDSP mentioned above,
> but it's more expensive and doesn't sound as good to my humble ear.
Interesting!
Most of the other op
On Thu, 2004-02-05 at 13:37, kevin ernste wrote:
> Now that the HDSP driver is stable (and the mixer is working so well!)
> I'd say it's a toss up between these two boxes depending on you
> needs/finances (this is much discussed elsewhere on this list).
It seems to me that the Multiface is more e
Hi,
Somebody probably already answered this, but I think this was fixed in
1.0.2a and later. I had the same problem with a 2.4.18-ck4 kernel. Hope
that helps!
Take care,
Steve
> I'm getting an unresolved symbol warning "sound_class" when trying to
> insmod this driver. This
Hi
I'm blown away by the number of controls in alsamixer for this card, I'm able to
control the front,center and rear speaker volumes, but there doesnt seem to be a
control for the side speakers.
Also I'd be grateful for someone who could show me what voodoo magic I can put
into my ~/.asoundrc
--- Bill Unruh <[EMAIL PROTECTED]> wrote:
> > especially with JACK and the fact that m-audio cards tend to be
> > brainlessly easy to set up in linux. Other than the issues I list
>
> Having just battled with the MAudio Transit for the past month, your
> characterisation of MAudio is not correct
Hello,
Does anybody know if it is possible to get fluidsynth to output
different instruments on different midi channels to different audio
channels? For example, I would like to send a piano instrument on midi
channel 1 out of channels 1 & 2 of the my delta66 and then have a rhodes
ep on midi
> especially with JACK and the fact that m-audio cards tend to be
> brainlessly easy to set up in linux. Other than the issues I list
Having just battled with the MAudio Transit for the past month, your
characterisation of MAudio is not correct. Plus the fact that Maudio
tends to be very closed m
I'm getting an unresolved symbol warning "sound_class" when trying to
insmod this driver. This is alsa-drivers version 1.0.2, compiled
against a 2.4.24 kernel. CONFIG_SOUND is a module.
I will provide a .config upon request.
--
Nick McCubbins, [EMAIL PROTECTED]
Equipment Monitor and Control,
Hi,
We have a couple of machines that we are having problems with. Has
anyone been able to sucessfully use a Digigram VX222 with the ALSA
drivers?
What kernel should I use? >2.4.22? Patches?
We are getting hard lockups of our system. We have turned off all power
management. It seems to be a pro
> That said, I see no reason why two cards couldn't be used together,
With proper clocking to ensure they are synced
---
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the
--- Doug <[EMAIL PROTECTED]> wrote:
> Hi Kevin,
>
> Are you using the 2 1010's together?
Yes, but not the way you are planning. We have two machines in the
same studio which are often used in conjunction (two different OS's).
Both boxes talk digitally to one another via S/PDIF, and then they ar
Hi Kevin,
Are you using the 2 1010's together? I am planning on getting a second
one to add 16 track capability. Right now I use about 13 mic inputs for
our live band recording, and do things like sub'ing the 3 tom mics
together on the board, for example, to get down to 8 tracks.
I've read
--- Florin Andrei <[EMAIL PROTECTED]> wrote:
> Anyone using M-Audio Delta 1010?
>
> Does it work ok with ALSA? Can you change sampling rates, etc?
Hi Florin -
I am running Planet with ALSA 1.0.1. (Fernando's cvs build).
Our studio has two 1010's. Sampling rate switching works great, but I
con
On Thu, 5 Feb 2004, Andrew Gaydenko wrote:
> It's sad :-(
>
> Has anybody some info about development team plans at this direction? Must I address
> the issue to the alsa-devel list? I see anothe parallel thread in the alsa-user list,
> where Takashi Iwai "modified the (emu10k1) driver on CVS". D
It's sad :-(
Has anybody some info about development team plans at this direction? Must I address
the issue to the alsa-devel list? I see anothe parallel thread in the alsa-user list,
where Takashi Iwai "modified the (emu10k1) driver on CVS". Does it mean, Takashi can
clarify my audio-future? :-)
At Wed, 4 Feb 2004 02:17:25 +0100,
Marco Iannaccone wrote:
>
> I just installed Slackware 9.1, and it seemed it correctly installed and
> configured ALSA for my Creative Audigy 2 Platinux Ex soundcard.
> I started 'alsamixer', and unmuted the channnels and set the volumes, then
> saved it with 'al
Hi,
You are right. Emu10k1 driver supports only 16/48000 playback and
recording. There is not info how is 24/96000 playback, recording
working on Audigy 2 (ZS).
Peter Zubaj
http://www.logofun.pobox.sk - urobte radost svojmu telefonu
Hi!
Has anybody any (may be indirect) information/links concerning playing 24/96 dvd
with Audigy2 ZS? I have installed 1.0.2 alsa with emu10k1 driver, but it seems,
the driver doesn't work with more than 16/48000. Am I wrong?
Andrew
---
The SF
in ALSA >= 1.0.0 Front, Surround, Center, LFE volume controls only
upmixing (mirroring).
if you set surround, center to 0) you dissable mirroring to surround
and center. LFE is (L + R) / 2. If you need downpass filter for LFE
from L, R channels, then you must change DSP program in driver.
If yo
>To dissable mirroring set in alsamixer "Surround Volume", "Center
>Volume" and "LFE Volume" to 0.
This isn't a solution at all!
As I said, I did this, and it obiously worked, but that's not what I want!
If I disable those volumes they won't be active also for 5.1 sound, right?
Anyway, you didn't
> > How do I tell ALSA (1.0.2a on a 2.6.1 kernel) to access the second input on
a
> > Creative SB Vibra 16 card (CT4170)?
> >
> If I understand correctly, this is a card-mounted input? I've got a
> Vibra16C and never noticed whether it had an aux in next to the CD in or
> not, but I'm somewhat cu
Hi,
>I wonder whether it is possible with ALSA, in simple questions:
yes.
>Is there such a thing? Where to get it from
ld10k1 - not yet finished, but something works (many bugs)
http://ld10k1.sourceforge.net
Mostly tested on Audigy (somehow works on SB Live too), has problem
to run on gentoo -
Anyway, how can I tell ASA to use for esample only front L-R channels+sub
for stereo output, to use only front central device + subfor mono output,
without upmixing, all the devices for 5.1, etc...?
Marco Iannaccone
[EMAIL PROTECTED]
---
The
> Just a quick comment on this. I think it's all a matter of taste. I find
> Alsamixer to be easily the best mixer app I've ever seen. I don't have to
> think about how to use it, just a space bar for capture toggle, "m" to
> toggle mute and a few things which are already very intuitive.
Wel... I
> > 1) Can't KDE apps (with or without ARTS (better without, anyway))
directly
> > use ALSA device? I don't think I can't set, somewhere, the ALSA support
for
> > KDE apps. I couldn't get it to work with Slackware 9.1 (olnly PCM front
L-R
> > device works), but... I tested Mandrake 9.2 before, and
Hi there,
I have installed SuSE 9.0 successfully on my r3000 laptop, and was told
by Compaq tech support that it has an Intel-based chipset; I haven't
been to ascertain for sure whether to use the intel8x0 driver or the
via-based one... However, neither of those work, either compiled-in or
as modu
On Thu, 5 Feb 2004, Robert Rozman wrote:
> Hi,
>
> I wonder if Revo can be used as 4xstereo channel output (Delta410 at twice
> the price can do it) under Alsa ?
No, at this time. But hardware can do that. We will add this feature on
demand.
Jaro
On Wed, 4 Feb 2004, Klaus Kosten wrote:
> Geoff Beasley wrote:
> >
> > I need to know about paralell port midi devices as per my last post, but
> > also please can you tell a newbie how to configure a device. I have a
> > Hoontech C-Port which works 100% for audio (Thanks Jaraslav!) However,
> >
On Tue, 3 Feb 2004 09:25:38 -0800 (PST)
Bill Unruh <[EMAIL PROTECTED]> wrote:
> On Tue, 3 Feb 2004, Jaroslav Kysela wrote:
>
> >
> > Get alsa-driver 1.0.2b.
> >
> > Jaroslav
>
> On www.alsa-project.org, there is only 1.0.2 listed as the last
> stabl
On Tuesday 03 of February 2004 6:25 pm, Bill Unruh wrote:
> On Tue, 3 Feb 2004, Jaroslav Kysela wrote:
> > Get alsa-driver 1.0.2b.
> >
> > Jaroslav
>
> On www.alsa-project.org, there is only 1.0.2 listed as the last stable
> release, although there is an
folks, sergey,
we are getting close to it - problem is partly solved, see below:
On 04.02.2004 17:07, Sergey Vlasov wrote:
On Wed, 04 Feb 2004 16:11:57 +0100 Tobias Hofmann wrote:
I have a Fujitsu-Siemens machine (one of 16 @$orkplace) which refuses to
make sound with alsa 1.0.2c and lib/util
Hi,
I wonder if Revo can be used as 4xstereo channel output (Delta410 at twice
the price can do it) under Alsa ?
Regards,
Robert.
---
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integrat
Actually both:
2.4.23 w/ low latency patches applied and 2.6.1 on Slackware 9.1. I
haven't run 2.6.1 extensively, just enough to confirm everything works,
and await good low latency performance.
moron wrote:
On February 4, 2004 10:01 pm, Doug wrote:
Using a Delta 1010LT here, works great. Ins
36 matches
Mail list logo