Austin <[EMAIL PROTECTED]> schrieb:
> Yeah, I have the same error.
> Using 'quattro1' or 'quattro2' works, but 'quattro' or 'q4' fails.
how about q4b (not plug but route type)? The same?
> Jack 0.75, alsa 0.96.0. It used to work, but I can't remember which
> kernel change or jack change made it
On 10/14/2003 12:33:57 PM, Falko Rütten wrote:
I have been experimenting a bit, some things seem to work, e.g. I can
use
either the left or the right pair of channels.., but --
when I want to start jackd with 4-channel enabled, I get the
following errors:
ALSA lib pcm_hw.c:494:(snd_pcm_hw_start)
Hi,
I have been experimenting a bit, some things seem to work, e.g. I can use
either the left or the right pair of channels.., but --
when I want to start jackd with 4-channel enabled, I get the following errors:
-
JACK compiled with POSIX SHM support
7936 waiting for
Falko Rütten wrote:
> 3. during the boot procedure, I get beeps when USB hotplugging gets enabled,
> and this kernel messages:
>
> ALSA usbaudio.c:1061 current rate 30464 is different from runtime rate 96000
This is a bug in the Quattro, it returns only the lower 16 bits of the
current sample ra
Hallo,
Falko Rütten hat gesagt: // Falko Rütten wrote:
> does anybody have a working configuration with this soundcard? I followed
> the hints and notes posted here and elsewhere, arranged my modules.conf &
> my .asoundrc accordingly -- still there remain some problems:
>
> 1. I don't seem to
Hi,
does anybody have a working configuration with this soundcard? I followed
the hints and notes posted here and elsewhere, arranged my modules.conf &
my .asoundrc accordingly -- still there remain some problems:
1. I don't seem to be able to use my mixer-device properly, i.e. aumix,
amix
