> anyway, could you comment out #define IGNORE_CTL_ERROR at the
> beginning of usbmixer.c? then the error won't be returned but
> ignored. please use --with-debug=detect in this case, too, at least
> once, for checking which controls are bad.
Hi again,
OK, now alsamixer starts, with more contro
At Thu, 12 Dec 2002 21:46:43 +1100,
[EMAIL PROTECTED] wrote:
>
> Hi Takashi,
>
> > i hope this is fixed now on cvs. please give a try.
> >
> still no luck- to recap the story so far: if I first boot windows,
> then boot linux, leaving the power on, I get a midi device (garbled
> signals), and a
Hi Takashi,
> i hope this is fixed now on cvs. please give a try.
>
still no luck- to recap the story so far: if I first boot windows, then boot linux,
leaving the power on, I get a midi device (garbled signals), and audio capture rate
seems to work for arecord, but alsamixer won't start, sayi
At Wed, 11 Dec 2002 08:56:06 +0100 (MET),
Clemens Ladisch wrote:
>
> [EMAIL PROTECTED] wrote:
> > > Apparently, the Windows driver did change the firmware.
> > > Does it still work after the Extigy was unplugged?
> >
> > no!
> >
> > > > I wonder what's up with alsamixer?
> > >
> > > Probably some
[EMAIL PROTECTED] wrote:
> > Apparently, the Windows driver did change the firmware.
> > Does it still work after the Extigy was unplugged?
>
> no!
>
> > > I wonder what's up with alsamixer?
> >
> > Probably some problem with old entries in /etc/asound.state. Try deleting
> > it.
>
> I had already
Hi again,
> Apparently, the Windows driver did change the firmware.
> Does it still work after the Extigy was unplugged?
no!
> > I wonder what's up with alsamixer?
>
> Probably some problem with old entries in /etc/asound.state. Try deleting
> it.
I had already deleted it... Now, after dis/reco
[EMAIL PROTECTED] wrote:
> > What firmware version does your Extigy have?
> > Did you try upgrading to the latest version (V1.1.020507)?
>
> I just tried to upgrade, but the installer said I already had the
> latest version. Back in Linux, now "alsamixer -c1" says: alsamixer:
> function snd_mixer_l
Hi Clemens
> What firmware version does your Extigy have?
> Did you try upgrading to the latest version (V1.1.020507)?
I just tried to upgrade, but the installer said I already had the latest version.
Back in Linux, now "alsamixer -c1" says:
alsamixer: function snd_mixer_load failed: Invalid argum
[EMAIL PROTECTED] wrote:
> > > if I try to record 5 seconds at 48000, it takes 30
> > > seconds, at 8000Hz.
> >
> > Please post the contents of /proc/asound/cardX/stream0 while recording.
>
> Here it is:
>
> Creative Technology Ltd. : USB Audio
> ...
> Capture:
> Status: Running
> Interface =
> > if I try to record 5 seconds at 48000, it takes 30
> > seconds, at 8000Hz.
> Please post the contents of /proc/asound/cardX/stream0 while recording.
>
Here it is:
Creative Technology Ltd. : USB Audio
Playback:
Status: Stop
Interface 1
Altset 1
Format: S16_LE
Channels: 2
[EMAIL PROTECTED] wrote:
> How do I change the capture rate of the extigy? So far it is stuck at
> 8000Hz, and if I try different rates with arecord, the correct number
> of samples are taken for the requested rate, but over a different
> period, eg. if I try to record 5 seconds at 48000, it takes
How do I change the capture rate of the extigy?
So far it is stuck at 8000Hz, and if I try different rates with arecord,
the correct number of samples are taken for the requested rate, but over a different
period, eg. if I try to record 5 seconds at 48000, it takes 30 seconds, at 8000Hz. Am
I mi
12 matches
Mail list logo
