With WSJT, you may need to reset your audio input and output device(s) in WSJT
because they can take on different device #'s if you reboot the computer or
unplug USB connection on the signallink and plug it in again.
Not sure if that's your issue.
I check each time I start up WSJT
-Origi
AO-7 in mode A last pass ? 2000utc ??
-Original Message-
From: amsat-bb-boun...@amsat.org [mailto:amsat-bb-boun...@amsat.org] On
Behalf Of K4FEG
Sent: Sunday, July 07, 2013 7:27 AM
To: amsat-bb@amsat.org
Subject: [amsat-bb] AO7 Mode A
AO7 is in Mode A during the 1309UTC pass over EM55aj8
On June 1st between the hours of 9:00AM and 3:00PM EDT the Chesapeake Center
For Science and Technology High School Amateur Radio Club
in Chesapeake, VA (FM16) will be holding demonstrations for area advanced
science teachers.
They will be operating FO-29 passes (13:11, 14:54 and 16:40 UTC) &
Les
I worked him right after you and can confirm your QSO
Norm N3YKF/OA4 in FH18 just north of Lima Peru.
Dave W0DHB
-Original Message-
From: amsat-bb-boun...@amsat.org [mailto:amsat-bb-boun...@amsat.org] On
Behalf Of Les Rayburn
Sent: Friday, May 24, 2013 12:33 AM
To: AMSAT Mailing Li
Les
I'm using HRD 6.0 SAT Tracker/HRD Rotator as well as SATPC32, predominately
HRD SAT Tracker.
In fact, I was using SAT Tracker when you and I QSO'd 5/20 on SO-50 .
I use them in conjunction with my Flex 5000A / EA4TX rotator controller/
G5500 rotator.
I am only using SAT Tracker and SATPC3
Mike
You might take a look at MixW , AWGPE or Packet Engine Pro for decoding
packet.
These are software modems so you won't need a TNC.
If you are decoding 9600 Baud packets, make sure you get your audio output
from pin 4 of the 910H main or sub band data sockets, use pin 5 for 1200
baud.
Progr
Make that http://www.celestrak.com/NORAD/elements/tle-new.txt
Sorry
-Original Message-
From: Dave WØDHB [mailto:d...@w0dhb.net]
Sent: Wednesday, May 15, 2013 4:37 PM
To: 'K4FEG'; 'starcom...@star-com.net'; 'amsat-bb@amsat.org'
Subject: RE: [amsat-bb] Tu
I only heard the beacon during the first few orbits, transponder hasn't been
fired up yet.
TLE's at http://www.celestrak.com/NORAD/elements/tle-news.txt
TURKSAT-3USAT
-Original Message-
From: amsat-bb-boun...@amsat.org [mailto:amsat-bb-boun...@amsat.org] On
Behalf Of K4FEG
Sent: Wednes
A good source of antennas and antenna advice is Dave W6OAL
http://www.hamtv.com/oal.html
He likes Loop yagis for 23cm
-Original Message-
From: amsat-bb-boun...@amsat.org [mailto:amsat-bb-boun...@amsat.org] On
Behalf Of Rolf Krogstad
Sent: Monday, May 13, 2013 10:23 AM
To: amsat-bb@amsat
I used eggbeaters for quite a while and they worked fine.
I had 18.3m feed lines (2m LMR400, 70cm LMR600) with preamps in the shack.
Receive preamps were required.
Dave W0DHB
-Original Message-
From: amsat-bb-boun...@amsat.org [mailto:amsat-bb-boun...@amsat.org] On
Behalf Of Werner, HB9
Bob
VO-52 seems to have a different offset per pass, but usually stays constant
for the pass, AO7 likewise.
I calibrate when the pass starts by using XIT and usually it stays constant
for the whole pass.
That being said, the last 2 VO-52 passes I was on this week, calibration did
change during t
Any further updates ?
Did not copy TurkSAT3USAT on 2 passes over US today 16:47 and 18:25
Did copy CubeBUG both passes, still just a carrier, no packet
Dave W0DHB
Original Message-
From: amsat-bb-boun...@amsat.org [mailto:amsat-bb-boun...@amsat.org] On
Behalf Of JoAnne Maenpaa
Sent: S
TURKSAT-3USAT was not heard on 19:38 UTC pass today Beacon or Transponder
:-(
CUBEBUG was not heard either.
Dave W0DHB
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateu
Nels
FO-29,AO-7,VO-52 and SO-50 are all active
Dave W0DHB
-Original Message-
From: amsat-bb-boun...@amsat.org [mailto:amsat-bb-boun...@amsat.org] On
Behalf Of anel...@min.midco.net
Sent: Sunday, April 28, 2013 2:13 PM
To: amsat-bb@amsat.org
Subject: [amsat-bb] What birds
I have spent
g] On
Behalf Of Dave WØDHB
Sent: Saturday, April 27, 2013 11:59 AM
To: 'PY5LF'; 'Jean-Pierre Godet'; amsat-bb@amsat.org
Subject: [amsat-bb] Re: RES: Re: TURKSAT-3USAT Have anyone heard today
Saturday
Monitored using Panadapter Both Cubebug and Turksat on 17:40 (60 deg max)
pa
Monitored using Panadapter Both Cubebug and Turksat on 17:40 (60 deg max)
pass in DN70kc
Copied both, Packet from Turksat and what appeared to be an unmodulated
Carrier from Cubebug.
No response from Turksat transponder.
Cubebug had the stronger signal, but don't know of 2013-018B,C and D each
Sa
Dave W0DHB
-Original Message-
From: amsat-bb-boun...@amsat.org [mailto:amsat-bb-boun...@amsat.org] On
Behalf Of Dave WØDHB
Sent: Friday, April 26, 2013 11:32 AM
To: AMSAT-BB@amsat.org
Subject: [amsat-bb] Turksat transponder
Was able to hear my carrier thru the Turksat transponder on 17:20
Was able to hear my carrier thru the Turksat transponder on 17:20 pass at
DN70
Behavior was strange, almost behaved like it wasnt inverting (it is
inverting, correct ?).
SSB did not come through cleanly.
TX/RX offset varied during the pass.
I will be better prepared for 18:49 pass and ge
Has anyone been able to view the .webp files created when decoding PhoneSAT
picture packets ?
The webp viewer and decoder program both report the file to be corrupted.
I must be missing something !?
Thanks
Dave W0DHB
___
Sent via AMSAT-BB@a
Heard and decoded KJ6KRW-2 over Colorado on pass at 21:28
-Original Message-
From: amsat-bb-boun...@amsat.org [mailto:amsat-bb-boun...@amsat.org] On
Behalf Of PY5LF
Sent: Thursday, April 25, 2013 4:11 PM
To: 'John Papay'
Cc: AMSAT-BB@amsat.org
Subject: [amsat-bb] RES: phonesat status
Joh
anko, NX9G
On 2013-04-04 19:23, Dave WØDHB wrote:
> Hi
Yanko
>
> Make sure the tracker box is grounded well and power supply
is good.
> I had terrible static electricity problems with mine.
>
>
You can also contact Mike Young [wb8...@ameritech.net] . Mike is the
>
volunteer m
Hi Yanko
Make sure the tracker box is grounded well and power supply is good.
I had terrible static electricity problems with mine.
You can also contact Mike Young [wb8...@ameritech.net] . Mike is the
volunteer manufacturer of LVB Trackers for AMSAT
Dave W0DHB
-Original Message-
From: a
John
I agree with Mark, that' what I did with my LVBTracker FWIW.
Mouser has the MAX232's for a couple of $$
Dave
-Original Message-
From: amsat-bb-boun...@amsat.org [mailto:amsat-bb-boun...@amsat.org] On
Behalf Of Mark L. Hammond
Sent: Wednesday, April 03, 2013 11:45 AM
To: George and
John
Don't think you can get Robert NH7WN he needs 13 deg. Elevation to get this
way.
You could email Tom K4XV on Kauai, he is getting is station together and
also has access to the Kauai College Station.
His email is good on qrz.com.
Dave W0DHB
-Original Message-
From: amsat-bb-boun..
Bill
I tune both using SATPC32 or HRD SATtracker.
You may not need a satellite mode if you use software.
I've been running across many more folks that tune both these days.
It definitely makes for a less chaotic passband without folks drifting
through the passband.
Rule of thumb is that downli
Jeff
On the receive end of things, check out one of the SDR dongles like the
Funcube dongle, they are inexpensive and have the added benefit of providing
a panadapter which allows you to view the entire bandpass of a transponder
satellite. A receive preamp will probably be required.
A laptop comp
Likes like Amsat website is up for the Keps file again.
-Original Message-
From: Ted [mailto:k7trkra...@charter.net]
Sent: Tuesday, January 22, 2013 4:01 PM
To: 'Dave WØDHB'
Subject: RE: [amsat-bb] new sat ID's ?
Ah hah ! thanks
73, Ted
-Original Message-----
F
Amsat web page is down along with its' Keps file. You're probably picking it
up from another Keps file in your search list
-Original Message-
From: amsat-bb-boun...@amsat.org [mailto:amsat-bb-boun...@amsat.org] On
Behalf Of Ted
Sent: Tuesday, January 22, 2013 3:39 PM
To: amsat-bb@amsat.org
28 matches
Mail list logo