2011/5/4 Seth Forshee :
> On Wed, May 04, 2011 at 01:27:17PM -0400, John W. Linville wrote:
>> On Wed, May 04, 2011 at 10:38:19AM -0500, Seth Forshee wrote:
>> > I've been investigating some reports of a regression in associating with
>> > APs with AR2413 in 2.6.38. Association repeatedly fails wit
> "Felix" == Felix Fietkau writes:
>> Well, I see the same on FreeBSD/MIPS whenever an Atheros device is
>> fondled incorrectly. Either because the chip isn't yet fully awake
>> or the register plainly doesn't exist.
>>
>> See if you can add some debugging in ath5k_hw_reset_tx_queue() to
>>
On Wed, May 04, 2011 at 10:38:19AM -0500, Seth Forshee wrote:
> I've been investigating some reports of a regression in associating with
> APs with AR2413 in 2.6.38. Association repeatedly fails with some
> "direct probe to x timed out" messages (see syslog excerpt below),
> although it will genera
On 2011-05-04 4:39 PM, Russell Senior wrote:
>> "Russell" == Russell Senior writes:
>
> Russell> Recently trying to abandon madwifi for good on some embedded
> Russell> devices with OpenWrt, encountered kernel panics. Same radio
> Russell> on an x86 platform (Soekris net4826), no kernel p
> "Russell" == Russell Senior writes:
Russell> Recently trying to abandon madwifi for good on some embedded
Russell> devices with OpenWrt, encountered kernel panics. Same radio
Russell> on an x86 platform (Soekris net4826), no kernel panic.
Russell> Different atheros radio, no kernel panic.
I'm setting up a hotspot (access point) on Atheros 2413. It is working
in b/g mode on channel 3 with default hostapd settings.
I'd like to adjust distance in which i could use it - currently at ~ 12
meters i can see almost half of the signal strength but associating with
hotspot fails. On my hom
