Bob Copeland wrote:
> There's nothing special about resume, it's just reseting the card the
> same way as ifconfig up does, so those patches will not help the
> card-ceases-function problem.
>
This mail is not exactly on topic, but... are you sure about this? I have often
the following proble
Nick, thanks for taking the time to explain this.
Nick Kossifidis wrote:
> below a predefined threshold you get a "noise floor calibration
> failed" message. You don't get a noise floor timeout message but a
> fail message and that's because of the failed gain offset calibration
> (noise floor c
Nick Kossifidis wrote:
> 2008/9/13 Romano Giannetti <[EMAIL PROTECTED]>:
>> Romano Giannetti wrote:
>>> Nick Kossifidis wrote:
>>>> 2008/9/12 Romano Giannetti <[EMAIL PROTECTED]>:
>>>>> Hi all,
>>>>> [ 3853.887794] ath5k p
Romano Giannetti wrote:
> Nick Kossifidis wrote:
>> 2008/9/12 Romano Giannetti <[EMAIL PROTECTED]>:
>>> Hi all,
>
>>> [ 3853.887794] ath5k phy0: noise floor calibration failed (2437MHz)
>>> [ 3853.889748] ath5k phy0: can't reset hardware (-11)
Nick Kossifidis wrote:
> 2008/9/12 Romano Giannetti <[EMAIL PROTECTED]>:
>> Hi all,
>> [ 3853.887794] ath5k phy0: noise floor calibration failed (2437MHz)
>> [ 3853.889748] ath5k phy0: can't reset hardware (-11)
>> [ 3853.891259] wlan0: Failed to c
Hi all,
I have an ath5k device in my laptop (a toshiba A305); I am running kernel
2.6.27-rc6:
[ 231.899321] ath5k_pci :06:00.0: enabling device ( -> 0002)
[ 231.901148] ath5k_pci :06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ
19
[ 231.903348] ath5k_pci :06:00.0: setting la
Alan Jenkins wrote:
>
> I now see Michael Karcher had already submitted the same fix. I suggest
> you use his and not mine. His patch description is more accurate (in
> terms of the problematic commit).
...still not in -rc3, for what I can see.
--
Sorry for the disclaimer --- ¡I cannot stop i
Nick Kossifidis wrote:
> I uploaded a compat-wireless snapshot with only ath5k enabled...
> http://www.kernel.org/pub/linux/kernel/people/mickflemm/compat-wireless-2008-07-03-ath5k.tar.bz2
>
> Check it out and see how it goes ;-)
>
More data here. I seems that at home, with a static WEP configu
Nick Kossifidis wrote:
> I uploaded a compat-wireless snapshot with only ath5k enabled...
> http://www.kernel.org/pub/linux/kernel/people/mickflemm/compat-wireless-2008-07-03-ath5k.tar.bz2
>
> Check it out and see how it goes ;-)
>
WOW!
Tried it on top of 2.6.26. Connected to my university net
On Wed, 2008-06-11 at 10:05 +1000, Geoffrey McRae wrote:
> Hi everyone,
>
> I am new to hardware hacking and I am looking to get the AR2454 device
> working in ath5k, however, due to my lack of understanding of the terms
> used (ie, what is a PHY?), I am finding it very hard to reverse engineer
>
10 matches
Mail list logo