I have two supplies. The first one was the one I had problems with and
have since fixed. It works great, now! After building that one and
LEARNING from the experience, the 2nd went together in NO TIME... heck,
I'll put yours together for less than the $100 Welborne wants to do it!
;-)
By the
Intresting tread ? post your findings if the power supply actually
works? and also if it doesn't ;-)
I'm one off the por sods thats ordered one off these powersupplys but
didn't get anything (ordered in april)nobody answers my email. So i'm
asuming Welborne is f***ing me beware! do not order anyt
OK, so I found the problem with PS #1. I opened the box and discovered
the leads from the regulator and one of the leads from the transformer
were touching the center channel (support beam, of sorts) of the box!!
Taking the card out and putting friction tape across the entire bottom
of the card,
i have one of the pre-assembled power supplies from welborne labs (i
haven't yet learned to solder that's my next project!).
no their stuff isn't 'junk' they have consistently gotten great reviews
over the years. the problem seems to be their owner isn't really capable
of running his business cor
If its from Welborne it is JUNK.
I have one. Its in the storage room. Don't waste anymore time on it.
And yes you are lucky you got anything at all from Welborne.
He sent you a kit that was missing parts! No surprise. I bought a
preamp kit. I spent over 2 months and over 30 emails and neve
CPC;238461 Wrote:
> Why do you feel the need to post negative comments about something
> you've never purchased or listen to?
Why do you seem to be incapable of understanding my post?
I did not make negative comments concerning the efficacy of wellborne
gear. Therefore it is not germane whether
andyg;238508 Wrote:
> 3 threads merged into one.
Thanks Andy... I won't do it again.
(nice haircut, BTW)
--
Eric Seaberg
Eric Seaberg - San Diego
[EMAIL PROTECTED]
Eric Seaberg's Profile: http://forums.slimdevices.com/
3 threads merged into one.
--
andyg
andyg's Profile: http://forums.slimdevices.com/member.php?userid=3292
View this thread: http://forums.slimdevices.com/showthread.php?t=39714
tomjtx;238433 Wrote:
> Good luck,
>
> The surprise is that you actually got anything from wellborne.
>
> Check out the threads on audio aslylum about all the people who paid
> and never received product or refunds.
Why do you feel the need to post negative comments about something
you've neve
Welborn does ship a grounded AC plug/cable but doesn't use the ground.
They actually state in the directions to trim it back to the strain
relief and use only the HOT and NEUTRAL wires.
I'll attempt connecting the chassis to the gnd of the +5 output to see
if that helps.
--
Eric Seaberg
Eric
I haven't built this but I looked at what is published on Welborne's
site. It looks like the entire psu including transformer is mounted on
the circuit board which is isolated from the aluminum enclosure. Do you
have the safety earth pin of the IEC connector referenced to the
aluminum chassis? Thi
Good luck,
The surprise is that you actually got anything from wellborne.
Check out the threads on audio aslylum about all the people who paid
and never received product or refunds.
--
tomjtx
tomjtx's Profile: http://fo
I bought two of these for my SB3s. Neither one came with the printed
circuit boards, so they had to ship those. I put the first one
together last night and discovered the power cord is too big to fit
through the supplied strain relief, so I went to my neighborhood
hardware store today and bought
13 matches
Mail list logo
