vayner) [mailto:[EMAIL PROTECTED]
Sent: Monday, February 04, 2008 10:17 AM
To: Duracom Lists; cisco-nsp@puck.nether.net
Subject: RE: [c-nsp] Router or Layer3 Switch
K,
If you need L3 with many Ethernet ports a L3 switch would be just what
you need.
Be aware that these switches use hardware resourc
We run a fairly large Wireless Internet service. Right now my network is
all switched/bridged and is time to route this network. I have 8 Radios at
my main location that are connected to the segments of our network.
Currently all these 8 Radios Ethernet ports plug into a 2950 switch with 1
port o
I have been terminating DSL on my 7206vxr for quite some time. My router
began acting sluggish the last couple of days for some odd reason the cpu
was being pegged out. Below was what was in the logs non stop. I only have
5 DSL customers terminated to this router. In order for me to get the CPU
I am running a Cisco 7206vxr NPE-400:
Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-IS-M), Version 12.2(29), RELEASE SOFTWARE
(fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Wed 11-May-05 15:38 by kellm
I have the need to limit a customer to 20M Up and 20M Down. The scenario is
they are connected to our OC3 ATM via a 45M DS3 but only paying for 20M, so
can you rate limit the entire interface that they are on without doing an
Access list to match IP's since they have several IP's from different Cl
This is my first post on this list.
I have a Cisco 7206vxr Router which I am using to terminate DSL connections
on my ATM DS3 via PPPoE. I have everything setup and working properly, but
I am wanting to use my DHCP server instead of using the IP Pool on the cisco
router. Is this possible? I a