Hi all,
we are testing a new 7600 IOS release (15.2(4)S4a) and run into issues with
ntpv4 sync in a hierarchical ntp design setup. When using ntp master command
for local fallback in case of remote ntp servers failure or cnx problems the
router never syncs to the configured server. It's always syn
Hi Victor,
the ES+ does not use pfc qos (mls qos commands). Qos in handled locally on
the lc. Per Default without marking configuration the ES+ should act in
"trust dscp" mode. The ingress ES+ should set dbus-cos to inform pfc about
cos values. Without ingress COS in case of routed interface you c
Hi,
have you tried "debug isis update-packets"? Works on SRC2:
000484: Jul 1 19:27:57.428: ISIS-Upd (): Rec L2 LSP , seq 1D, ht
65171,
000485: Jul 1 19:27:57.428: ISIS-Upd (): from SNPA
(GigabitEthernet2/0/0)
000486: Jul 1 19:27:57.428: %CLNS-4-AUTH_FAIL: ISIS: LSP authentication
failed
00048
There are some diffs between T and X 1G. T should not work without
autoneg(AN) (because PMA and PCS rely on AN). X should work without autoneg.
Maybe this links will help:
T:
https://www.iol.unh.edu/services/testing/ge/knowledgebase/1000BASE-T_PMA_Jul
y2004.pdf
X:
https://www.iol.unh.edu/services
Hi Adam,
here's an overview of the L2 Enc boxes for p2p and p2mp setups:
http://www.uebermeister.com/files/inside-it/2011_Market_Overview_Ethernet_En
cryptors_P2P.pdf
http://www.uebermeister.com/files/inside-it/2011_Market_Overview_Ethernet_En
cryptors_Multipoint.pdf
this boxes add overhead (mi
Guys,
we are testing tr69 on 800 Series and run into the following problem.
When configuring a static ip address under cwmp context or at the interface
the tr69 agent is trying to connect to the acs. After enabling DHCP on the
wan interface the interface receives an valid ip address, but the tr69
. April 2011 19:23
An: cisco-nsp@puck.nether.net
Betreff: Re: [c-nsp] [7604 + ES-20] speed nonegotiate not available
insert the previous sfp back in, change what you want and then remove it.
--
Tassos
Thomas Sillaber wrote on 14/04/2011 16:35:
> Hi,
>
> after inserting a SFP-GE-T GB
Hi,
after inserting a SFP-GE-T GBIC into a free port with default settings on a
ES-20 LC and then switch the GBIC against a SFP-GE-S GBIC the speed
nonegotiate command is not available/working anymore. The only option that
is shown after entering ? is "speed 1000" and the box is not accepting the