EoMPLS is supported, it will give you a layer 2 tunnel if MPLS is
enabled in the core.
On 5/12/2014 6:00 PM, Pete Lumbis wrote:
I can't find info that says they are supported, but I'd assume not.
On Mon, May 12, 2014 at 5:38 PM, Ivan wrote:
Thanks Pete. Do you know if any of the other tunn
I can't find info that says they are supported, but I'd assume not.
On Mon, May 12, 2014 at 5:38 PM, Ivan wrote:
> Thanks Pete. Do you know if any of the other tunnelling modes are
> supported?
>
> ipipIP over IP encapsulation
> ipsec IPSec tunnel encapsulation
> ipv6Generic pac
Thanks Pete. Do you know if any of the other tunnelling modes are supported?
ipipIP over IP encapsulation
ipsec IPSec tunnel encapsulation
ipv6Generic packet tunneling in IPv6
ipv6ip IPv6 over IP encapsulation
Thanks
Ivan
> GRE is not supported on the ASR901.
>
>
> On Mon, Ma
GRE is not supported on the ASR901.
On Mon, May 12, 2014 at 5:59 AM, Ivan wrote:
> I have some Cisco ASR901s and would like to have a layer 2 or layer 3
> tunnel between them over a layer 3 network.
>
> I have configured GRE and tunnel is up and it is possible to ping the
> remote ends. All lo
I have some Cisco ASR901s and would like to have a layer 2 or layer 3
tunnel between them over a layer 3 network.
I have configured GRE and tunnel is up and it is possible to ping the
remote ends. All looks good from the control plane side but I am not
having success with traffic being forwarded.