Hello all,
I managed to create two interfaces on Sun Ultra 5
with different MAC addresses.
I created file /etc/modprobe.d/sunhme.local
and inserted into two lines:
options sunhme macaddr=0x08,0x00,0x20,0x9c,0x62,0x77
options sunhme macaddr=0x08,0x00,0x20,0x9c,0x62,0x78
I removed /etc/udev/rules.d/
On Tue, Feb 02, 2010 at 11:19:09PM -0500, Ross Halliday scribbled thusly:
> What kind of NIC are you using as eth1? If this is a Sun HME I believe
> they always clone the base system MAC as tested on an Ultra 10 with two
> SunSwift cards (FastEthernet/UltraSCSI combo). I ran into similar issues
> o
On Wed, 03 Feb 2010 07:41:51 +0300 Ross Halliday wrote:
>What kind of NIC are you using as eth1? If this is a Sun HME I believe
>they always clone the base system MAC as tested on an Ultra 10 with
>two SunSwift cards (FastEthernet/UltraSCSI combo). I ran into similar
>issues on a Sun E440R with
> -Original Message-
> From: Vladimir R [mailto:vl...@mail.ru]
> Sent: Tuesday, February 02, 2010 2:25 PM
> To: debian-sparc@lists.debian.org
> Subject: Re: Problems with interfaces on Sun Ultra 5
>
> On Tue, 02 Feb 2010 20:41:50 +0300 Eric Brower wrote:
> >
On Tue, 02 Feb 2010 20:41:50 +0300 Eric Brower wrote:
>I'm not sure there's enough information on your configuration
>to provide good recommendations, but take a look into the
local_>mac_address? Open-Boot PROM setting and see if that helps.
>When set "true" it allows each interface to have a
Vladimir R wrote:
Hello all,
after install Lenny on Sun Ultra 5,
I succesfully setup network on first interface, eth0,
with local network address, and it works well.
Then I want to setup eth1 to external addresses,
but found, that I have no eth1, but have eth1_rename,
with same MAC address as et
I'm not sure there's enough information on your configuration to
provide good recommendations, but take a look into the
local_mac_address? Open-Boot PROM setting and see if that helps. When
set "true" it allows each interface to have a different MAC address,
rather than the "system" MAC address.
Avevo la LAN che compariva ed appariva poi quando usavo la LAN cadeva il
collegame
nto ad InterNet, poi ho scritto ne file /etc/network/interfaces per ogni
collegamento
i dati necessari. Mi spiego
primo il loopback
secondo il collegamento alla LAN (indirizzo,network,broadcast)
terzo InterNet (i
Hello all,
after install Lenny on Sun Ultra 5,
I succesfully setup network on first interface, eth0,
with local network address, and it works well.
Then I want to setup eth1 to external addresses,
but found, that I have no eth1, but have eth1_rename,
with same MAC address as eth0.
I want to have
9 matches
Mail list logo