Hello dear Debian user reading me,
I've been struggling with this configuration for the past few days (2,5)
before I decide to post here. Hopefully this will be the right place?!
So here are the physical elements of my story:
Machine => Dell Latitude E6320
With a single SSD such as :
Model Fam
Daniel Burrows wrote:
On Thu, Jun 05, 2008 at 03:39:08PM +0200, Jean-Louis Crouzet <[EMAIL
PROTECTED]> was heard to say:
Jean-Louis Crouzet wrote:
available memory.
#free -t
You may then observe that free memory left is more than slightly
different from previous poll, let say som
Stackpole, Chris wrote:
I can confirm. It does seem to change by about 6MB every time I run it.
Chris
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Jean-Louis Crouzet
Sent: Thursday, June 05, 2008 8:39 AM
To: debian-user@lists.debian.org
Subject
Jean-Louis Crouzet wrote:
Hi all,
Am I the only one having this under Lenny?
When running just after first login (as root) the following:
#free -t
Observe free Memory left (you might even want to write it down)
Then run
#aptitude
get a fresh update (press u key ;-)
then quit aptitude, you
Hi all,
Am I the only one having this under Lenny?
When running just after first login (as root) the following:
#free -t
Observe free Memory left (you might even want to write it down)
Then run
#aptitude
get a fresh update (press u key ;-)
then quit aptitude, you know how to do this. Then c
Sven Joachim wrote:
On 2008-06-02 08:37 +0200, Jean-Louis Crouzet wrote:
The subject shall tell you already a lot but lastely I had to remove
ntp from my machine.
Could you please elaborate why you had to do that?
I found this unfortunate and I'm just asking here
if this is normal
Hi all,
The subject shall tell you already a lot but lastely I had to remove ntp
from my machine. I found this unfortunate and I'm just asking here if
this is normal or if this could have been anticipated?
Thanks,
JL
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubsc
Hello all,
I'm currently using Iceweasel and I'm trying to understand why I get so
many lock-up while browsing pages with intensive flash content (i.e.
MySpace Music).
kernel:
Linux GX200 2.6.24jlcv018 #1 Wed May 14 10:54:39 CEST 2008 i686 GNU/Linu
Based on 2.6.24-5
iceweasel:
Mozilla/5.0 (X
Jean-Louis Crouzet wrote:
Carl Fink wrote:
On Thu, May 15, 2008 at 08:21:43AM +0200, Jean-Louis Crouzet wrote:
Carl Fink wrote:
On Wed, May 14, 2008 at 06:32:22PM +0200, Jean-Louis Crouzet wrote:
FF, Iceweasel, Konqueror same battle (perhaps slightly better for
konqueror but por flash
Carl Fink wrote:
On Thu, May 15, 2008 at 08:21:43AM +0200, Jean-Louis Crouzet wrote:
Carl Fink wrote:
On Wed, May 14, 2008 at 06:32:22PM +0200, Jean-Louis Crouzet wrote:
FF, Iceweasel, Konqueror same battle (perhaps slightly better for
konqueror but por flash support).
Well I do not want
Carl Fink wrote:
On Wed, May 14, 2008 at 06:32:22PM +0200, Jean-Louis Crouzet wrote:
FF is just a memory & cpu hog, I used to have a machine working OK with
my own optimized kernel but QT and xfce4 + FF are just eating all and I
swap like crazy... The recommendation I collected is just
Douglas A. Tutty wrote:
On Wed, May 14, 2008 at 03:57:43PM +0200, Javier Barroso wrote:
Since one week ago I'm noticing firefox is sometimes irresponsible during
three or four seconds.
I think you mean nonresponsive, but I love the comment that
firefox/iceweasel is irresponsible. Perhaps its
Ron Johnson wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 04/11/08 10:21, Jean-Louis Crouzet wrote:
[snip]
Flash plugin (whatever the version) is always the root cause of my
Which version? (I run Sid.)
Iceweasel lock_up (due to swapping or other...) the number do not really
Jean-Louis Crouzet wrote:
Ron Johnson wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 04/10/08 17:06, tom arnall wrote:
On Thursday 10 April 2008 14:14, andy wrote:
Thierry Chatelet wrote:
On Thursday 10 April 2008 21:45:32 Ron Johnson wrote:
On 04/10/08 14:35, tom arnall wrote
Ron Johnson wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 04/10/08 17:06, tom arnall wrote:
On Thursday 10 April 2008 14:14, andy wrote:
Thierry Chatelet wrote:
On Thursday 10 April 2008 21:45:32 Ron Johnson wrote:
On 04/10/08 14:35, tom arnall wrote:
all of a sudden browsers have
komodo wrote:
On Wednesday 27 of February 2008 20:57:22 Angus Auld wrote:
--- Jean-Louis Crouzet <[EMAIL PROTECTED]>
wrote:
Angus Auld wrote:
This are just my observations and experiences with
Flash-player and Linux of late.
I use my browsers to view a lot of Flash vids, and
the
fac
Angus Auld wrote:
This are just my observations and experiences with
Flash-player and Linux of late.
I use my browsers to view a lot of Flash vids, and the
fact that many websites are using (over-using?) Flash
animations, etc. makes it quite important, at least to
me, that my browser be Flash-fri
To all,
I went through a number of check with the latest Iceweasel 2.0.0.12
running on my customized Linux GX200 2.6.22jlcv010 #1 Thu Feb 14
10:22:42 CET 2008 i686 GNU/Linux basically based on 2.6.22-6.lenny1.
Unfortunately my configuration is definitely having some issue when
browsing pages w
Ron Johnson wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 02/25/08 08:36, Jean-Louis Crouzet wrote:
Ron Johnson wrote:
On 02/25/08 03:37, Jean-Louis Crouzet wrote:
[snip]
To all,
I went through a number of check with the latest 2.0.0.12 running on my
customized Linux GX200
Ron Johnson wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 02/25/08 03:37, Jean-Louis Crouzet wrote:
[snip]
To all,
I went through a number of check with the latest 2.0.0.12 running on my
customized Linux GX200 2.6.22jlcv010 #1 Thu Feb 14 10:22:42 CET 2008
i686 GNU/Linux basically
dick thompson wrote:
No problem with partition space. I am using a 20GB partition with a 4
GB swap space.
Will try the other suggestions when I get back on Debian tomorrow.
Kent West wrote:
Ron Johnson wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 02/24/08 17:00, dick wrote:
Ron Johnson wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 02/18/08 05:09, Jean-Louis Crouzet wrote:
Ron Johnson wrote:
On 02/17/08 07:58, Adam Hardy wrote:
Is iceweasel v2.0.0.12 from the debian etch repository the same version
as firefox? I assume so but I just want to make sure
Ron Johnson wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 02/17/08 07:58, Adam Hardy wrote:
Is iceweasel v2.0.0.12 from the debian etch repository the same version
as firefox? I assume so but I just want to make sure.
I'm having some minor issues browsing and I can't figure out what
Jean-Louis Crouzet wrote:
Hi all,
I installed a PPPoE server and it's up and running. I added users for
those tunnels and my defaulted Eth. interface is not configured to any
IP address.
If I run
#pppoe-server -L 12.0.0.2 -R 12.0.0.100 -N 2
I can have my client (i.e. for test a
Hi all,
I installed a PPPoE server and it's up and running. I added users for
those tunnels and my defaulted Eth. interface is not configured to any
IP address.
If I run
#pppoe-server -L 12.0.0.2 -R 12.0.0.100 -N 2
I can have my client (i.e. for test a PPPoE client from MSFT Windows)
get a
Raj Kiran Grandhi wrote:
Jean-Louis Crouzet wrote:
Jochen Schulz wrote:
Jean-Louis Crouzet:
#cat sip.conf | grep -v "^;"
That's a useless use of cat. :) You may instead just do
grep -v '^;' sip.conf
If you want to strip empty lines and lines beginning with whites
Jochen Schulz wrote:
Jean-Louis Crouzet:
#cat sip.conf | grep -v "^;"
That's a useless use of cat. :) You may instead just do
grep -v '^;' sip.conf
If you want to strip empty lines and lines beginning with whitespace
followed by a ';' as well, do
grep -
Kevin Mark wrote:
On Thu, Nov 08, 2007 at 09:00:56AM +0100, Jean-Louis Crouzet wrote:
Hi all,
this is something I saw in the past in this NG but I can't retrieve it
anywhere. I looked for it since a while without any luck. Then I decided to
try here...
Goal is from bash command to
Hi all,
this is something I saw in the past in this NG but I can't retrieve it
anywhere. I looked for it since a while without any luck. Then I decided
to try here...
Goal is from bash command to strip command lines from a configuration
file (i.e for asterisk sip.conf) and display the output
Jean-Louis Crouzet wrote:
Hi all,
first I have to admit that I don't get it. All my other Windows XP/2K/me
machines can see shared folder and their content but the Vista one can't.
I tried the change within the Vista registry such as:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\C
Hi all,
first I have to admit that I don't get it. All my other Windows XP/2K/me
machines can see shared folder and their content but the Vista one can't.
I tried the change within the Vista registry such as:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\LMCompatibilityLevel
from a
Roberto C. Sánchez wrote:
On Fri, Mar 23, 2007 at 03:27:33PM +0100, Jean-Louis Crouzet wrote:
Hi all,
might be the wrong NG for such request but I'm not willing to get into a
MSFT one!
Problem:
Using a recent Vista Family premium, I could not see the content on a
Samba shared f
Hi all,
might be the wrong NG for such request but I'm not willing to get into a
MSFT one!
Problem:
Using a recent Vista Family premium, I could not see the content on a
Samba shared folder (folder could be opened but i's empty...). Same
works when used by other XP or NT Windows based PC.
I
Hi all,
not sure using the proper place (I first posted into
[EMAIL PROTECTED] and also in testing w/o any
success in getting answers or help), but let's have try here.
I have an old HP Omnibook 900 and I'm compiling an optimized Linux
image for it under Etch Debian.
When using the
Leslie Rhorer wrote:
I'm running KDE under Debian Sarge, and it won't allow me to log in as root.
I need to be able to do this, and a root login works fine on the machine
running Woody. How can I configure this newer version of KDE to allow root
logins? Also, when I use XDMCP to log in to th
Hi all,
not sure using the proper place for such request, but let's have try I
having an old HP Omnibook900 and I'm compiling an optimized Linux image
for it under Debian distro.
When using the defacto package from Debian the pcmcia card is configured
an work like a charm. When I do use my com
Almut Behrens wrote:
On Thu, Sep 08, 2005 at 03:03:24PM +0200, Jean-Louis Crouzet wrote:
D [08/Sep/2005:10:45:57 +0200] [Job 20] Spooler: cups
D [08/Sep/2005:10:45:57 +0200] [Job 20] Printer: HPLaserJet1100CUPSv1.1.x
D [08/Sep/2005:10:45:57 +0200] [Job 20] PPD file:
/etc/cups/ppd
Almut Behrens wrote:
On Thu, Sep 08, 2005 at 03:03:24PM +0200, Jean-Louis Crouzet wrote:
D [08/Sep/2005:10:45:57 +0200] [Job 20] Spooler: cups
D [08/Sep/2005:10:45:57 +0200] [Job 20] Printer: HPLaserJet1100CUPSv1.1.x
D [08/Sep/2005:10:45:57 +0200] [Job 20] PPD file:
/etc/cups/ppd
Clive Menzies wrote:
On (07/09/05 19:26), Jean-Louis Crouzet wrote:
Clive Menzies wrote:
On (07/09/05 18:14), Jean-Louis Crouzet wrote:
Hi all,
not sure this is the proper NG but I couldn't find any CUPS related NG
so far...
I do have a strange issue with my wrong configuratio
Clive Menzies wrote:
On (07/09/05 18:14), Jean-Louis Crouzet wrote:
Hi all,
not sure this is the proper NG but I couldn't find any CUPS related NG
so far...
I do have a strange issue with my wrong configuration for sure!
I have a printer (HP LaserJet1100) connected to my SMC740
Hi all,
not sure this is the proper NG but I couldn't find any CUPS related NG
so far...
I do have a strange issue with my wrong configuration for sure!
I have a printer (HP LaserJet1100) connected to my SMC7404WBRA printer
connector. The only working way I get something on the printer was
C
41 matches
Mail list logo
