Signed-off-by: Cristian Dumitrescu
---
doc/guides/guidelines/index.rst |1 +
doc/guides/guidelines/statistics.rst | 104 ++
2 files changed, 105 insertions(+), 0 deletions(-)
create mode 100644 doc/guides/guidelines/statistics.rst
diff --git a/doc/guid
> > On x550, flow director doesn't support other IP packets directly.
> > If we want to monitor IP other packets, the L4 protocol and ports must be
> > masked. It means, on x550, if we want to add a flow director filter for
> > other
> > IP packets, a flow director mask must have been configed to
> > Wenzhuo Lu (26):
> > ixgbe/base: update copyright and readme
> > ixgbe/base: fix code comment, double from
> > ixgbe/base: fix typo error in code comment
> > ixgbe/base: check return value after calling
> > ixgbe/base: allow tunneled UDP and TCP frames to reach their
> > destinati
> -Original Message-
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Bernard Iremonger
> Sent: Monday, June 08, 2015 4:48 PM
> To: dev at dpdk.org
> Subject: [dpdk-dev] [RFC PATCH V4] ixgbe: changes to support PCI Port Hotplug
>
> This patch depends on the Port Hotplug Framewor
> -Original Message-
> From: Thomas Monjalon [mailto:thomas.monjalon at 6wind.com]
> Sent: Thursday, June 11, 2015 1:05 PM
> To: Dumitrescu, Cristian
> Cc: dev at dpdk.org
> Subject: Re: [dpdk-dev] [PATCH] doc: guidelines for library statistics
>
> Hi Cristian,
>
> Thanks for trying to
Hi,
I want to get etherport's net_device structs and using ethtool_cmd to get some
information of etherports.
Are these capabilitys igb_uio driver also provided?
If not, how can I get net_devices and use ethtool_cmd capabilitys?
--
Best Regards,
Scott Jhuang
Software Engineering Dept.
Softwar
> -Original Message-
> From: Richardson, Bruce
> Sent: Monday, June 15, 2015 5:23 PM
> To: Ananyev, Konstantin
> Cc: Olivier MATZ; dev at dpdk.org; Damjan Marion (damarion)
> Subject: Re: [dpdk-dev] rte_mbuf.next in 2nd cacheline
>
> On Mon, Jun 15, 2015 at 05:10:44PM +0100, Ananyev, Kon
> -Original Message-
> From: David Harton (dharton) [mailto:dharton at cisco.com]
> Sent: Monday, June 15, 2015 5:05 PM
> To: Ananyev, Konstantin; Wang, Liang-min; dev at dpdk.org
> Subject: RE: [dpdk-dev] [PATCH v4 1/4] ethdev: add apis to support access
> device info
>
>
>
> > -
> -Original Message-
> From: Wang, Liang-min
> Sent: Monday, June 15, 2015 3:47 PM
> To: Ananyev, Konstantin; dev at dpdk.org
> Subject: RE: [dpdk-dev] [PATCH v4 1/4] ethdev: add apis to support access
> device info
>
>
>
> > -Original Message-
> > From: Ananyev, Konstantin
>
On Mon, Jun 15, 2015 at 05:10:44PM +0100, Ananyev, Konstantin wrote:
>
>
> > -Original Message-
> > From: Richardson, Bruce
> > Sent: Monday, June 15, 2015 5:02 PM
> > To: Ananyev, Konstantin
> > Cc: Olivier MATZ; dev at dpdk.org; Damjan Marion (damarion)
> > Subject: Re: [dpdk-dev] rte_m
On 06/15/2015 04:52 PM, Ananyev, Konstantin wrote:
> Hi Olivier,
>
>> -Original Message-
>> From: Olivier MATZ [mailto:olivier.matz at 6wind.com]
>> Sent: Monday, June 15, 2015 3:31 PM
>> To: Richardson, Bruce
>> Cc: Ananyev, Konstantin; dev at dpdk.org; Damjan Marion (damarion)
>> Subje
Hi Bernard,
2015-06-15 15:08, Iremonger, Bernard:
[snip]
In order to avoid filling too much the patchwork page of the patch,
it's better to remove useless lines while keeping only the lines needed
to understand the history.
> > Hi Tetsuya,
> >
> > This patch fails to apply to the latest code.
>
We still have no maintainer for e1000.
Anyone to double-check this short patch?
2015-05-28 17:46, Yury Kylulin:
> Add support to enable and disable reception of all multicast packets by the
> VF using standard API
> rte_eth_allmulticast_enable()/rte_eth_allmulticast_disable().
>
> Signed-off-by:
On Mon, Jun 15, 2015 at 04:59:55PM +0100, Ananyev, Konstantin wrote:
>
>
>
> As I can see, vector TX is the only one that calls
> __rte_pktmbuf_prefree_seg() directly.
> All others use rte_pktmbuf_free_seg(), that does ' m->next = NULL' anyway.
> For vector TX - yes, need to verify that it woul
2015-06-12 15:33, Helin Zhang:
> v3 changes:
> * Moved the newly added element right after 'uint16_t reta_size', where it
> was a padding. So it will not break any ABI compatibility, and no need to
> disable it by default.
[...]
> @@ -918,6 +918,7 @@ struct rte_eth_dev_info {
> uint32_t t
On Mon, Jun 15, 2015 at 04:28:55PM +0100, Ananyev, Konstantin wrote:
>
>
> > -Original Message-
> > From: Richardson, Bruce
> > Sent: Monday, June 15, 2015 4:24 PM
> > To: Olivier MATZ
> > Cc: Ananyev, Konstantin; dev at dpdk.org; Damjan Marion (damarion)
> > Subject: Re: [dpdk-dev] rte_m
On 06/15/2015 04:12 PM, Bruce Richardson wrote:
> On Mon, Jun 15, 2015 at 04:05:05PM +0200, Olivier MATZ wrote:
>> Hi,
>>
>> On 06/15/2015 03:54 PM, Ananyev, Konstantin wrote:
>>>
>>>
-Original Message-
From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Bruce Richardson
>>>
On Mon, Jun 15, 2015 at 05:19:27PM +0200, Olivier MATZ wrote:
>
>
> On 06/15/2015 04:52 PM, Ananyev, Konstantin wrote:
> > Hi Olivier,
> >
> >> -Original Message-
> >> From: Olivier MATZ [mailto:olivier.matz at 6wind.com]
> >> Sent: Monday, June 15, 2015 3:31 PM
> >> To: Richardson, Bruc
> -Original Message-
> From: Richardson, Bruce
> Sent: Monday, June 15, 2015 5:02 PM
> To: Ananyev, Konstantin
> Cc: Olivier MATZ; dev at dpdk.org; Damjan Marion (damarion)
> Subject: Re: [dpdk-dev] rte_mbuf.next in 2nd cacheline
>
> On Mon, Jun 15, 2015 at 04:59:55PM +0100, Ananyev, Kon
> > Needed to run as non-root but with higher memory allocations, and
> > removes a constraint on no-huge mode being limited to 64M. A usage
> > example is if running with file input with the pcap PMD, which can be
> > done as non-root after this patch via e.g.,
> >
> > ./test-dpdk --no-huge -m
> -Original Message-
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Ananyev, Konstantin
> Sent: Monday, June 15, 2015 9:46 AM
> To: Wang, Liang-min; dev at dpdk.org
> Subject: Re: [dpdk-dev] [PATCH v4 1/4] ethdev: add apis to support access
> device info
>
>
>
> > -Origi
Hi,
On 06/15/2015 03:54 PM, Ananyev, Konstantin wrote:
>
>
>> -Original Message-
>> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Bruce Richardson
>> Sent: Monday, June 15, 2015 2:44 PM
>> To: Olivier MATZ
>> Cc: dev at dpdk.org; Damjan Marion (damarion)
>> Subject: Re: [dpdk-d
On Wed, May 27, 2015 at 11:30 AM, Simon Kagstrom <
simon.kagstrom at netinsight.net> wrote:
> Needed to run as non-root but with higher memory allocations, and
> removes a constraint on no-huge mode being limited to 64M. A usage
> example is if running with file input with the pcap PMD, which can
> -Original Message-
> From: Richardson, Bruce
> Sent: Monday, June 15, 2015 4:40 PM
> To: Ananyev, Konstantin; #
> Cc: Olivier MATZ; dev at dpdk.org; Damjan Marion (damarion)
> Subject: Re: [dpdk-dev] rte_mbuf.next in 2nd cacheline
>
> On Mon, Jun 15, 2015 at 04:28:55PM +0100, Ananyev,
Update the sample guide doc for vhost multiple queues;
Update the prog guide doc for vhost lib multiple queues feature;
It is added since v3
Signed-off-by: Changchun Ouyang
---
doc/guides/prog_guide/vhost_lib.rst | 35
doc/guides/sample_app_ug/vhost.rst | 110
Add per queue stats info
Changes in v3
- fix coding style and displaying format
- check stats_enable to alloc mem for queue pair
Changes in v2
- fix the stats issue in tx_local
- dynamically alloc mem for queue pair stats info
- fix checkpatch errors
Signed-off-by: Changchun Ouyang
--
Control queue can't work for vhost-user mulitple queue mode,
so introduce a counter to void the dead loop when polling the control queue.
Changes in v2:
- fix checkpatch errors
Signed-off-by: Changchun Ouyang
---
drivers/net/virtio/virtio_ethdev.c | 15 +--
1 file changed, 13 inse
Sample vhost leverage the VMDq+RSS in HW to receive packets and distribute them
into different queue in the pool according to 5 tuples.
And enable multiple queues mode in vhost/virtio layer.
HW queue numbers in pool exactly same with the queue number in virtio device,
e.g. rxq = 4, the queue numb
Sample vhost need know the queue number user want to enable for each virtio
device,
so add the new option '--rxq' into it.
Changes in v3
- fix coding style
Changes in v2
- refine help info
- check if rxq = 0
- fix checkpatch errors
Signed-off-by: Changchun Ouyang
---
examples/vhost/ma
This is added since v3.
Check the virtqueue address's validity.
Signed-off-by: Changchun Ouyang
---
lib/librte_vhost/vhost_user/vhost-net-user.c | 11 ++-
lib/librte_vhost/virtio-net.c| 10 ++
2 files changed, 20 insertions(+), 1 deletion(-)
diff --git a/lib/libr
QEMU sends separate commands orderly to set the memory layout for each queue
in one virtio device, accordingly vhost need keep memory layout information
for each queue of the virtio device.
This also need adjust the interface a bit for function gpa_to_vva by
introducing the queue index to specify
Each virtio device could have multiple queues, say 2 or 4, at most 8.
Enabling this feature allows virtio device/port on guest has the ability to
use different vCPU to receive/transmit packets from/to each queue.
In multiple queues mode, virtio device readiness means all queues of
this virtio devi
In non-SRIOV environment, VMDq RSS could be enabled by MRQC register.
In theory, the queue number per pool could be 2 or 4, but only 2 queues are
available due to HW limitation, the same limit also exist in Linux ixgbe driver.
Changes in v2:
- fix checkpatch errors
Signed-off-by: Changchun Ouya
This patch set supports the multiple queues for each virtio device in vhost.
The vhost-user is used to enable the multiple queues feature, It's not ready
for vhost-cuse.
The QEMU patch of enabling vhost-use multiple queues has already merged into
upstream sub-tree in
QEMU community and it will b
2015-05-29 15:23, Paul Atkins:
> The config option to turn off huge table support does not work with
> the existing -m option to specify the amount of memory to use. Add
> a new option --no-huge-mem-size that takes a paramater
> to use as the heap size instead of the value specified by
> MEMSIZE_
On Mon, Jun 15, 2015 at 04:30:56PM +0200, Olivier MATZ wrote:
>
>
> On 06/15/2015 04:12 PM, Bruce Richardson wrote:
> > On Mon, Jun 15, 2015 at 04:05:05PM +0200, Olivier MATZ wrote:
> >> Hi,
> >>
> >> On 06/15/2015 03:54 PM, Ananyev, Konstantin wrote:
> >>>
> >>>
> -Original Message-
> -Original Message-
> From: Richardson, Bruce
> Sent: Monday, June 15, 2015 4:24 PM
> To: Olivier MATZ
> Cc: Ananyev, Konstantin; dev at dpdk.org; Damjan Marion (damarion)
> Subject: Re: [dpdk-dev] rte_mbuf.next in 2nd cacheline
>
> On Mon, Jun 15, 2015 at 05:19:27PM +0200, Olivier MATZ
2015-06-11 15:48, John McNamara:
> This change returns a system error code if tests fail when
> running any of the "make test" targets.
>
> This allows the tests to report failures while running in
> continuous integration environments.
>
> Previously "make test" returned $? == 0 for all combinat
Hi Damjan,
On 06/10/2015 11:47 PM, Damjan Marion (damarion) wrote:
>
> Hi,
>
> We noticed 7% performance improvement by simply moving rte_mbuf.next field to
> the 1st cache line.
>
> Currently, it falls under /* second cache line - fields only used in slow
> path or on TX */
> but it is actua
On Mon, Jun 15, 2015 at 04:05:05PM +0200, Olivier MATZ wrote:
> Hi,
>
> On 06/15/2015 03:54 PM, Ananyev, Konstantin wrote:
> >
> >
> >> -Original Message-
> >> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Bruce Richardson
> >> Sent: Monday, June 15, 2015 2:44 PM
> >> To: Olivi
> -Original Message-
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Iremonger, Bernard
> Sent: Monday, June 15, 2015 3:32 PM
> To: Tetsuya Mukawa; dev at dpdk.org
> Subject: Re: [dpdk-dev] [PATCH v4 5/5] eal: Fix uio mapping differences
> between linuxapp and bsdapp
>
> > -O
> Each test requires a certain minimal amount of memory.
> Spreading memory on all sockets means that the test will get less memory than
> what it wanted on multi sockets system.
> So replace all_sockets() with per_sockets().
>
> Also doubled memory on group_5 as current requirement is not enough.
> -Original Message-
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Iremonger, Bernard
> Sent: Monday, June 15, 2015 3:30 PM
> To: Tetsuya Mukawa; dev at dpdk.org
> Subject: Re: [dpdk-dev] [PATCH v4 3/5] eal: Fix memory leaks and needless
> increment of pci_map_addr
>
> > -O
Hi Olivier,
> -Original Message-
> From: Olivier MATZ [mailto:olivier.matz at 6wind.com]
> Sent: Monday, June 15, 2015 3:31 PM
> To: Richardson, Bruce
> Cc: Ananyev, Konstantin; dev at dpdk.org; Damjan Marion (damarion)
> Subject: Re: [dpdk-dev] rte_mbuf.next in 2nd cacheline
>
>
>
> On
> -Original Message-
> From: Ananyev, Konstantin
> Sent: Monday, June 15, 2015 9:46 AM
> To: Wang, Liang-min; dev at dpdk.org
> Subject: RE: [dpdk-dev] [PATCH v4 1/4] ethdev: add apis to support access
> device info
>
>
>
> > -Original Message-
> > From: Wang, Liang-min
> > Sen
On Mon, Jun 15, 2015 at 03:20:22PM +0200, Olivier MATZ wrote:
> Hi Damjan,
>
> On 06/10/2015 11:47 PM, Damjan Marion (damarion) wrote:
> >
> > Hi,
> >
> > We noticed 7% performance improvement by simply moving rte_mbuf.next field
> > to the 1st cache line.
> >
> > Currently, it falls under /*
> -Original Message-
> From: Tetsuya Mukawa [mailto:mukawa at igel.co.jp]
> Sent: Tuesday, May 19, 2015 6:55 AM
> To: dev at dpdk.org
> Cc: Iremonger, Bernard; Tetsuya Mukawa
> Subject: [PATCH v4 5/5] eal: Fix uio mapping differences between linuxapp
> and bsdapp
>
> This patch fixes below
> -Original Message-
> From: Tetsuya Mukawa [mailto:mukawa at igel.co.jp]
> Sent: Tuesday, May 19, 2015 6:55 AM
> To: dev at dpdk.org
> Cc: Iremonger, Bernard; Tetsuya Mukawa
> Subject: [PATCH v4 3/5] eal: Fix memory leaks and needless increment of
> pci_map_addr
>
> This patch fixes follo
On x550, flow director doesn't support other IP packets directly.
If we want to monitor IP other packets, the L4 protocol and ports must
be masked. It means, on x550, if we want to add a flow director filter
for other IP packets, a flow director mask must have been configed to
mask L4 protocol and
> -Original Message-
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Bruce Richardson
> Sent: Monday, June 15, 2015 2:44 PM
> To: Olivier MATZ
> Cc: dev at dpdk.org; Damjan Marion (damarion)
> Subject: Re: [dpdk-dev] rte_mbuf.next in 2nd cacheline
>
> On Mon, Jun 15, 2015 at 03
On Fri, Jun 12, 2015 at 1:30 AM, Ond?ej B?lka wrote:
> On Mon, May 18, 2015 at 01:01:42PM -0700, Ravi Kerur wrote:
> > Background:
> > After preliminary discussion with John (Zhihong) and Tim from Intel it
> was
> > decided that it would be beneficial to use AVX/SSE intrinsics for memcmp
> > simi
On Mon, 15 Jun 2015 18:34:13 +
"Ananyev, Konstantin" wrote:
>
>
> > -Original Message-
> > From: Richardson, Bruce
> > Sent: Monday, June 15, 2015 5:23 PM
> > To: Ananyev, Konstantin
> > Cc: Olivier MATZ; dev at dpdk.org; Damjan Marion (damarion)
> > Subject: Re: [dpdk-dev] rte_mbuf
> -Original Message-
> From: Wang, Liang-min
> Sent: Monday, June 15, 2015 2:26 PM
> To: Ananyev, Konstantin; dev at dpdk.org
> Subject: RE: [dpdk-dev] [PATCH v4 1/4] ethdev: add apis to support access
> device info
>
>
>
> > -Original Message-
> > From: Ananyev, Konstantin
>
> -Original Message-
> From: Ananyev, Konstantin
> Sent: Friday, June 12, 2015 8:31 AM
> To: Wang, Liang-min; dev at dpdk.org
> Subject: RE: [dpdk-dev] [PATCH v4 1/4] ethdev: add apis to support access
> device info
>
>
>
> > -Original Message-
> > From: Wang, Liang-min
> > Sen
> -Original Message-
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of David Marchand
> Sent: Monday, June 01, 2015 1:11 PM
> To: dev at dpdk.org
> Subject: [dpdk-dev] [PATCH] ixgbe: fix TSO in IPv6
>
> From: Didier Pallard
>
> When TSO is used with IPv6, generated frames are i
> This variable has undefined values in some cases.
>
> Fixes: 422a20a4e62d ("app/testpmd: fix uninitialized flow control variables")
> Signed-off-by: Ding Zhi
> Signed-off-by: David Marchand
[...]
> --- a/app/test-pmd/cmdline.c
> +++ b/app/test-pmd/cmdline.c
> @@ -4743,7 +4743,7 @@ cmd_link_flo
Any comment?
> When TSO is used with IPv6, generated frames are incorrect.
> L4 frame is OK, but length field of IPv6 header was not populated correctly.
>
> Signed-off-by: Didier Pallard
2015-06-09 09:03, Ouyang Changchun:
> Fix enqueue/dequeue can't handle chained vring descriptors;
> Remove unnecessary vring descriptor length updating;
> Add support copying scattered mbuf to vring;
>
> Changchun Ouyang (4):
> lib_vhost: Fix enqueue/dequeue can't handle chained vring descriptor
2015-05-29 17:26, Maciej Gajdzica:
> From: Pawel Wodkowski
>
> This patch add following features:
> 1. Make entry variable length - remove 64 byte limit.
> 2. Add line continue character '\' to make multiline values possible.
>
> This patch also fixes following issues:
> 1. BUG: section were
> > This is a modification of qos_sched example to use
> > librte_cfgfile for parsing configuration file.
> >
> > Signed-off-by: Michal Jastrzebski
>
> Acked-by: Cristian Dumitrescu
Applied, thanks
On Fri, Jun 12, 2015 at 10:53:58PM +, Assaad, Sami (Sami) wrote:
> When I operate a DPDK based application, the EAL always reports the following:
> EAL: WARNING: Address Space Layout Randomization (ASLR) is enabled in the
> kernel.
> EAL: This may cause issues with mapping memory into sec
On Fri, Jun 12, 2015 at 01:32:56PM -0400, Roger B. Melton wrote:
> Hi Bruce, Comment in-line. Regards, Roger
>
> On 6/12/15 7:28 AM, Bruce Richardson wrote:
> >The functions rte_eth_rx_queue_count and rte_eth_descriptor_done are
> >supported by very few PMDs. Therefore, it is best to check for s
Hi,
More fixes are needed in rte_compat.h
2015-05-29 17:26, Maciej Gajdzica:
> --- a/lib/librte_compat/rte_compat.h
> +++ b/lib/librte_compat/rte_compat.h
> @@ -103,7 +103,7 @@
> #define VERSION_SYMBOL(b, e, v)
Should be b,e,n
> #define __vsym
> #define BASE_SYMBOL(b, n)
Should be b,e
> -#
From: Stephen Hemminger
To allow for compatiablity with later releases, any functions
to be removed should be marked as deprecated for one release.
Signed-off-by: Stephen Hemminger
---
app/test/Makefile| 8 +++-
lib/librte_acl/rte_acl.h | 4 ++--
2 files changed, 9 insertions(+), 3
From: Stephen Hemminger
These functions were tagged as deprecated in 2.0 so they can be
removed in 2.1
Signed-off-by: Stephen Hemminger
Acked-by: Helin Zhang
---
v2 - remove doc and version map references
app/test/Makefile | 6 ---
app/test/test_kni.c
From: Stephen Hemminger
These were deprecated in 2.0 so remove them from 2.1
Signed-off-by: Stephen Hemminger
---
drivers/net/ring/rte_eth_ring.c | 55 ---
drivers/net/ring/rte_eth_ring_version.map | 4 +--
2 files changed, 1 insertion(+), 58 deletions(-)
From: Stephen Hemminger
The ring and KNI patches remove functions marked as deprecated.
I wanted to do the same thing for ACL but the those functions were not
properly marked as deprecated in 2.0 so final removal will have to wait
until 2.2.
Stephen Hemminger (3):
pmd_ring: remove deprecated
v2 changes:
- rebase this patch onto the HEAD
- add more description for this patch
This patch includes 3 changes related to MAC/VLAN address table
when the system(e.g. testpmd) is started and closed:
- remove default MAC address with fixed VLAN 0 which was for the
debug purpose before the M
Fm10k PF/VF does not support QinQ; VLAN strip and filter are always on
for PF/VF ports.
Signed-off-by: Shaopeng He
---
drivers/net/fm10k/fm10k_ethdev.c | 26 +-
1 file changed, 25 insertions(+), 1 deletion(-)
diff --git a/drivers/net/fm10k/fm10k_ethdev.c b/drivers/net/fm
MAC filter function was newly added, each PF and VF can have up to 64 MAC
addresses. VF filter needs support from PF host, which is not available now.
Signed-off-by: Shaopeng He
---
drivers/net/fm10k/fm10k.h| 3 +-
drivers/net/fm10k/fm10k_ethdev.c | 91 ++
VLAN filter was updated to add/delete one static entry in MAC table for each
combination of VLAN and MAC address. More sanity checks were added.
Signed-off-by: Shaopeng He
---
drivers/net/fm10k/fm10k.h| 23 ++
drivers/net/fm10k/fm10k_ethdev.c | 65
v2 changes:
- add result check when updating MAC address table for VLAN filter
- move VLAN Table updating to the end of VLAN filter process
- release mailbox lock immediately after each mailbox related operation
- update the value of rx_offload_capa and tx_offload_capa
- fix miscelleous review
On Mon, 15 Jun 2015 04:21:43 -0400
Vijayakumar Muthuvel Manickam wrote:
> Implement .ndo_change_carrier to enable
> DPDK applications to propagate link state changes to
> kni virtual interfaces through sysfs
>
> Signed-off-by: Vijayakumar Muthuvel Manickam
> ---
> Implemented .ndo_change_carrie
Hi,
I play OpenvSwitch dpdk, when ovs-vswitchd got killed, it won't free up any
allocated huge pages, shown by below:
# tail /proc/meminfo
HardwareCorrupted: 0 kB
AnonHugePages:106496 kB
HugePages_Total: 8
HugePages_Free:6
HugePages_Rsvd:0
HugePages_Surp:0
Hu
On Sun, Jun 14, 2015 at 9:07 PM, Zhang, Helin wrote:
> Would it be better to modify the similar thing in kni_ioctl_create()?
>
That one doesn't need to use the "safe" version of list_for_each_entry()
either, but it isn't in the packet processing path so the minor performance
improvement doesn't
Acked-by: Jingjing Wu
> -Original Message-
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Wenzhuo Lu
> Sent: Monday, June 15, 2015 1:59 PM
> To: dev at dpdk.org
> Subject: [dpdk-dev] [PATCH] ixgbe: fix x550 flow director issue
>
> On x550, flow director doesn't support other I
> -Original Message-
> From: Thomas Monjalon [mailto:thomas.monjalon at 6wind.com]
> Sent: Saturday, June 13, 2015 12:45 AM
> To: Wu, Jingjing
> Cc: dev at dpdk.org; neil.horman at tuxdriver.com
> Subject: Re: [dpdk-dev] [PATCH 3/6] ethdev: extend struct to support flow
> director in VFs
Hi Jason,
The same results by adding "vhostforce=on"
-device virtio-net-pci,netdev=public1,mac=00:0c:29:e1:ff:ff,ioeventfd=on
-netdev
tap,id=public1,ifname=tapvm02,script=/home/geo/tzhou/kvm-image/ovs.sh,downscript=/home/geo/tzhou/kvm-image/ovs_down.sh,vhostforce=on,vnet_hdr=on
Or
-device vir
Implement .ndo_change_carrier to enable
DPDK applications to propagate link state changes to
kni virtual interfaces through sysfs
Signed-off-by: Vijayakumar Muthuvel Manickam
---
Implemented .ndo_change_carrier instead of adding a new ioctl
lib/librte_eal/linuxapp/kni/kni_net.c | 10 ++
Hi Wenfeng
It would be better to describe why 'current->pid' cannot, while
'task_pid_vnr(current)' can be used in containers.
In addition, the title should be brief, and there should be a commit log for
the detailed description.
Thanks,
Helin
> -Original Message-
> From: dev [mailto:dev-
> -Original Message-
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Stephen Hemminger
> Sent: Friday, June 12, 2015 1:19 PM
> To: dev at dpdk.org
> Cc: Stephen Hemminger
> Subject: [dpdk-dev] [PATCH 2/3] kni: remove deprecated functions
>
> From: Stephen Hemminger
>
> These
> -Original Message-
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Bernard Iremonger
> Sent: Wednesday, June 10, 2015 11:13 PM
> To: dev at dpdk.org
> Subject: [dpdk-dev] [PATCH 2/2] doc: fix kni command line in Kernel NIC
> Interface
> chapter
>
>
> Signed-off-by: Bernard
> -Original Message-
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Bernard Iremonger
> Sent: Wednesday, June 10, 2015 11:13 PM
> To: dev at dpdk.org
> Subject: [dpdk-dev] [PATCH 1/2] doc: correct kni command line in virtio
> chapter
>
>
> Signed-off-by: Bernard Iremonger
A
> -Original Message-
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Jay Rolette
> Sent: Thursday, June 4, 2015 3:19 AM
> To: dev at dpdk.org
> Subject: [dpdk-dev] [PATCH 2/3] kni: minor opto
The title is not so descriptive for the changes.
The change itself seems OK for me. Tha
Would it be better to modify the similar thing in kni_ioctl_create()?
- Helin
> -Original Message-
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Jay Rolette
> Sent: Thursday, June 4, 2015 3:19 AM
> To: dev at dpdk.org
> Subject: [dpdk-dev] [PATCH 1/3] kni: minor opto
>
> Don'
That?s great. Thanks!
- Helin
From: Vijayakumar Muthuvel Manickam [mailto:mmvi...@gmail.com]
Sent: Monday, June 15, 2015 9:11 AM
To: Zhang, Helin
Cc: thomas.monjalon at 6wind.com; dev at dpdk.org
Subject: Re: [dpdk-dev] [PATCH] kni: Add link status update
Hi Helin,
Since Stepthen poin
Hi Marc
> -Original Message-
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Marc Sune
> Sent: Monday, June 1, 2015 8:33 AM
> To: dev at dpdk.org
> Subject: [dpdk-dev] [PATCH] kni: ignore double calls to rte_kni_init()
>
> Prevent double initialization of the KNI subsytem.
>
>
> -Original Message-
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Bruce Richardson
> Sent: Wednesday, May 27, 2015 9:48 PM
> To: dev at dpdk.org
> Subject: [dpdk-dev] [PATCH 1/4] kni: add function to query the name of a kni
> object
>
> When a KNI object is created, a name i
Any response for my comments? Did I miss anything?
- Helin
> -Original Message-
> From: Zhang, Helin
> Sent: Tuesday, May 19, 2015 8:54 AM
> To: Vijayakumar Muthuvel Manickam; dev at dpdk.org
> Subject: RE: [dpdk-dev] [PATCH] kni: Add link status update
>
> Hello
>
> > -Original Mes
Any response to my comments? Did I miss anything?
- Helin
> -Original Message-
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Zhang, Helin
> Sent: Monday, May 4, 2015 4:56 PM
> To: Shelton Chia; dev at dpdk.org
> Subject: Re: [dpdk-dev] [PATCH] kni: fix igb and ixgbe kni ethtoo
> -Original Message-
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of
> xuelin.shi at freescale.com
> Sent: Wednesday, February 11, 2015 2:50 PM
> To: thomas.monjalon at 6wind.com
> Cc: dev at dpdk.org
> Subject: [dpdk-dev] [PATCH] kni/ethtool/ixgbe: enforce access between ixgbe
In containers like docker, current->pid returns current process's global PID
instead of its
own PID under containers's PID namespace, and get_net_ns_by_pid() suppose to
accept a virtual
PID under its own namespace, so we should use task_pid_vnr(current) to get
current process's
virtual PID inste
92 matches
Mail list logo
