Darrell,
> If I understand this correctly, if you are administrating a remote SME5
> server and sitting behind a NAT firewall (like another SME5) then you
> must use the local external ip as the ValidFrom address on the remote
> server. This then would permit access from any internal workstat
Dan,
> Just a quick question--is the "new" IP format supported? That is,
> instead of feeding it 192.168.100.0/255.255.255.0, can I feed it
> 192.168.100.0/24? That just seems cleaner.
Funny you should ask... Charlie suggested that I should make a note that
CIDR notation was supported...
Dan York <[EMAIL PROTECTED]> said:
> http://www.e-smith.org/docs/howto/remote-mgr-access-howto.html
Great addition Dan.
Comments/questions
If I understand this correctly, if you are administrating a remote SME5
server and sitting behind a NAT firewall (like another SME5) then you
must
Scott,
> The command in step 2.1 has a typo. It currently reads:
>
> /sbin/e-smith/db configuration setprop ValidFrom IP/Subnet[,IP/Subnet]
Yeah, I just caught that when I added a section on disabling access (in
response to David's excellent question). New version is online now...
Thanks,
Dan
Dan
The command in step 2.1 has a typo. It currently reads:
/sbin/e-smith/db configuration setprop ValidFrom IP/Subnet[,IP/Subnet]
which should in fact be:
/sbin/e-smith/db configuration setprop httpd-admin ValidFrom
IP/Subnet[,IP/Subnet]
The command is shown with the correct format in the fi
-devinfo] FYI - new HOWTO on remote access via SSL
to the server manager
Quoting Dan York <[EMAIL PROTECTED]>:
> Comments and suggestions about the document are welcome.
Just a quick question--is the "new" IP format supported? That is,
instead of feeding it 192.168.100.0
Quoting Dan York <[EMAIL PROTECTED]>:
> Comments and suggestions about the document are welcome.
Just a quick question--is the "new" IP format supported? That is,
instead of feeding it 192.168.100.0/255.255.255.0, can I feed it
192.168.100.0/24? That just seems cleaner.
--
Dan Brown, K