thank you very much Kalik.
Now it works!! :)
Ivan Kalik wrote:
>
>>
>> Ok. I set that parameter you comment: use_tunneled_reply = yes and it
>> does
>> not sent the VSA in the access-accept which I think that if radius could
>> sent this VSA atributed inside an access-accept paquet then the NA
>
> Ok. I set that parameter you comment: use_tunneled_reply = yes and it does
> not sent the VSA in the access-accept which I think that if radius could
> sent this VSA atributed inside an access-accept paquet then the NAS would
> understand it.
That would work, if only you enabled it in the *cor
aangles wrote:
> Ok!! I'm sorry, it was not a good idea introducing wireshark print screens.
> Yeah its better to put here a log of my freeradius , which it is the issue
> we talk about. I didn't though with that. Here is my log of freeradius. As
> see, only some Aruba-VSA is sent not in the Access
Ok!! I'm sorry, it was not a good idea introducing wireshark print screens.
Yeah its better to put here a log of my freeradius , which it is the issue
we talk about. I didn't though with that. Here is my log of freeradius. As
see, only some Aruba-VSA is sent not in the Access-Accept, but inside so
aangles wrote:
> once I do radiusd -X, I see only the first access-challenge with the
> Aruba-User-Vlan Attirbute, and no more access-challenges have this
> attribute.
In fact, Access-Challenges are not supposed to have VSAs.
> So, it is not working , May be i am close to the solution but I don
>>> have freeradius 2.1, and the configuration of my users file is like the
>>> following:
>>>
>>> ...
>>> DEFAULT Auth-Type = LDAP
>>> Aruba-User-Vlan = 20,
>>> Fall-Through : = 1
>>>
>>>
>>> once I do radiusd -X, I see only the first access-challenge with the
>>> Aruba-User-Vlan Attirbute, a
Ivan Kalik wrote:
>
>>
>> have freeradius 2.1, and the configuration of my users file is like the
>> following:
>>
>> ...
>> DEFAULT Auth-Type = LDAP
>> Aruba-User-Vlan = 20,
>> Fall-Through : = 1
>>
>>
>> once I do radiusd -X, I see only the first access-challenge with the
>> Aruba-User-V
>
> have freeradius 2.1, and the configuration of my users file is like the
> following:
>
> ...
> DEFAULT Auth-Type = LDAP
> Aruba-User-Vlan = 20,
> Fall-Through : = 1
>
>
> once I do radiusd -X, I see only the first access-challenge with the
> Aruba-User-Vlan Attirbute, and no more access-ch
have freeradius 2.1, and the configuration of my users file is like the
following:
...
DEFAULT Auth-Type = LDAP
Aruba-User-Vlan = 20,
Fall-Through : = 1
once I do radiusd -X, I see only the first access-challenge with the
Aruba-User-Vlan Attirbute, and no more access-challenges have this
at
9 matches
Mail list logo