Dave Gibelli wrote:
> I just want mschap to allow the user on without checking the password,
> but I cannot work out where to configure freeradius to allow access
> without checking the password.
MS-CHAP doesn't work that way. The server MUST have a copy of the
password. If it doesn't the clie
All
Here is a snippet from radiusd -X
I just want mschap to allow the user on without checking the password,
but I cannot work out where to configure freeradius to allow access
without checking the password.
All I want to do is place the port into the correct vlan. (I assume I
have to use PEAP w
Please check this:
There is no problem, isn't it?
"
Sending Access-Accept of id 128 to 193.226.239.181:3072
Service-Type := Framed-User
Framed-Protocol := PPP
Framed-Compression := Van-Jacobson-TCP-IP
Framed-MTU := 1500
MS-MPPE-Recv-Key =
0x2c4b7b6574809b4
Helo,
I have a big problem. The authentication with Freeradius is almost
workink just one thing is wrong.
After connecting to the wlan network ( PEAP) 4-5 seconds later my pc
get disconnected. I don't know why.
I get Access-Accept from the Radius. The Windows says the
authentication is done.
4 matches
Mail list logo