I don't know how to set this up, does anybody have a guide? I have
never used openmp before.
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
Dave McGuire writes:
> On 3/27/11 6:05 AM, Stephan Boettcher wrote:
>> I am designing a lot of boards with an LPC2141 ARM7, Altera 3c25, USB
>> client, RS232, SPI, uSD. No ram, no Linux, just the builtin flash and
>> RAM of the ARM and FPGA, and 1MByte SPI flash. The frontend is fitted
>> with a
If you go into the attributes of a symbol, and tick "show inherited",
then you will see the nets the power/ground pins are associated to. You
can either change these pin assigns by adding new nets, or change your
net names. At least, that's how I've always done it.
On 2 April 2011 2
On Sat, 2011-04-02 at 19:02 -0300, Daniel B. wrote:
> Hi geda-user@,
>
> I'm kinda new to gschem (in fact, first time learning a electronics
> cad software) and a little confused about the power pins issue. I read
> the geda-faq:gschem and found that it's a good practice to NOT hide
> the power pi
Daniel B. wrote:
> I'm kinda new to gschem (in fact, first time learning a electronics
> cad software) and a little confused about the power pins issue. I
> read the geda-faq:gschem and found that it's a good practice to NOT
> hide the power pins.
ack.
> Is this related to the design of the
Hi geda-user@,
I'm kinda new to gschem (in fact, first time learning a electronics cad
software) and a little confused about the power pins issue. I read the
geda-faq:gschem and found that it's a good practice to NOT hide the power pins.
Is this related to the design of the symbol? Are there so
On 3/27/11 6:05 AM, Stephan Boettcher wrote:
I am designing a lot of boards with an LPC2141 ARM7, Altera 3c25, USB
client, RS232, SPI, uSD. No ram, no Linux, just the builtin flash and
RAM of the ARM and FPGA, and 1MByte SPI flash. The frontend is fitted
with a variable number of ADCs of various
On Sat, 2011-04-02 at 00:34 +0200, Kai-Martin Knaak wrote:
> Joshua wrote:
>
> > I wrote a tool which exports and imports the properties from
> > a project to and to a csv file. The format is simular to that of the
> > bom2 format as it groups lines together which have similar data. This
> >
8 matches
Mail list logo