I'm an idiot.
export LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:/opt/geda/lib
*Many thanks* Peter & Ben for helping me get the CVS version on my Fedora 5
box tonight!
I'm now going to pour some vodka and back this puppy up.
Again, many thanks,
Craig
___
ge
*Many thanks*, Peter!
export ACLOCAL_FLAGS="-I /usr/local/share/aclocal"
did the trick to build and complete without errors.
Now for the final (I hope) hair pulling moment, when I issue the command
gschem
I get
/opt/geda/bin/gschem: error while loading shared libraries: libgeda.so.28:
canno
On Sun, 2007-02-18 at 20:39 -0600, Craig Niederberger wrote:
> Does anyone know what version of gettext the CVS make for geda/gaf
> expects? I'm beginning to think that in updating gettext from 0.14.5
> to 0.16.1 I overshot the mark:
>
> ./configure: line 7594: AM_GNU_GETTEXT: command not found
On Sun, 2007-02-18 at 19:57 -0600, Craig Niederberger wrote:
> Thanks, Peter! I built and installed gettext 1.8.1, and it went a
> little farther. It now errored out at a place which I don't get at
> all:
>
> autogen.sh running: aclocal ...
> aclocal:configure.ac:486: warning: macro `AM_GNU_GET
Does anyone know what version of gettext the CVS make for geda/gaf expects?
I'm beginning to think that in updating gettext from 0.14.5 to 0.16.1 I
overshot the mark:
./configure: line 7594: AM_GNU_GETTEXT: command not found
./configure: line 7595: syntax error near unexpected token `0.16.1'
./co
Thanks, Peter! I built and installed gettext 1.8.1, and it went a little
farther. It now errored out at a place which I don't get at all:
autogen.sh running: aclocal ...
aclocal:configure.ac:486: warning: macro `AM_GNU_GETTEXT' not found in
library
aclocal:configure.ac:487: warning: macro `AM_
On Sun, 2007-02-18 at 19:38 -0600, Craig Niederberger wrote:
> Thanks, Ben. I installed guile 1.6.8, and it went a little farther,
> then complained that I don't have gettext installed. Weird thing is,
> I do.
>
> **Error**: You must have `gettext' installed.
> You can get it from: http://www.gn
Thanks, Ben. I installed guile 1.6.8, and it went a little farther, then
complained that I don't have gettext installed. Weird thing is, I do.
**Error**: You must have `gettext' installed.
You can get it from: http://www.gnu.org/software/gettext
make: *** [gschem/configure] Error 1
root:~/gedas
On Sun, 2007-02-18 at 16:59 -0800, Ben Jackson wrote:
> On Sun, Feb 18, 2007 at 06:54:18PM -0600, Craig Niederberger wrote:
> > OK, so I'm trying to install via CVS geda/gaf. I'm getting this error with
> > make install:
> >
> > checking for guile-config... no
> > configure: error: guile-config r
On Sun, Feb 18, 2007 at 06:54:18PM -0600, Craig Niederberger wrote:
> OK, so I'm trying to install via CVS geda/gaf. I'm getting this error with
> make install:
>
> checking for guile-config... no
> configure: error: guile-config required but not found
> make: *** [libgeda/config.h] Error 1
>
>
OK, so I'm trying to install via CVS geda/gaf. I'm getting this error with
make install:
checking for guile-config... no
configure: error: guile-config required but not found
make: *** [libgeda/config.h] Error 1
# guile --version
Guile 1.6.7
I read on a previous post by Stuart Sept 2005:
Any
I'm so sorry, you sure did, and they look *great*. I can hardly wait to
give them a spin! Again, many thanks for the help, and many thanks for
making beautiful PCB design and fabrication a reality for someone with just
a linux box sitting in a small apartment without even a garage!!
Thanks,
Crai
> For pcb, the cvs instructions on that page are pretty generic cvs
> instructions. Anything special for pcb? Will a standard make after the
> download do?
I just posted instructions about an hour ago...
___
geda-user mailing list
geda-user@moria.se
*Many, many* thanks!
For geda/gaf, the instructions are pretty clear. The only question I have
is what I should set in Fedora for the environment variables PATH,
LD_LIBRARY_PATH, and PKG_CONFIG_PATH.
For pcb, the cvs instructions on that page are pretty generic cvs
instructions. Anything speci
Beware that --enable-doc is the default, but will fail without
--enable-maintainer-mode (which makes some of the needed images). So
choose one of
--disable-doc
or
--enable-maintainer-mode --enable-doc
Otherwise the make will fail in the doc which interferes with make install.
Harry Eaton wrote:
DJ's optimizer might
be able to automatically remove the nubbins.
The optimizer as its included with the stock PCB version 20060822 is
pretty good at removing these nubs. I autorouted a board the other day
and there was only one nubbin that wouldn't go away with the opti
On Fri, Feb 16, 2007 at 01:33:02PM -0500, DJ Delorie wrote:
> [other configure options, type "./configure --help" to see them all:
> --enable-doc to build documenatation
> --enable-maintainer-modeto rebuild docs from sources]
Beware that --enable-doc is the default, but will fail w
For pcb, just:
cvs -d:pserver:[EMAIL PROTECTED]:/cvsroot/pcb login
(hit entery for password)
cvs -z3 -d:pserver:[EMAIL PROTECTED]:/cvsroot/pcb co -P pcb
cd pcb
./configure --prefix=/opt/geda --with-gui=lesstif
or
./configure --prefix=/opt/geda --with-gui=gtk
[other configure options, type "./
Don't use the CD yet. I haven't updated it, and I won't update it
until Ales does the next release. Your best bet is to learn how to
install from CVS. It's not hard. Here are instructions for gEDA/gaf:
http://geda.seul.org/developer.html
and for PCB:
http://sourceforge.net/cvs/?group_id=737
Thanks super. I intend to yum remove geda-* and pcb-* and then install the
latest version. What's the best way to do that? Get the iso from
http://www.geda.seul.org/download.html? That's what I did last time before
installing with yum. Is there an easier or better way? Not sure how to use
CV
> Thanks super. I had gone to the yum install, as when I originally
> built and installed gEDA I could only get it to work in my home
> directory (didn't seem to like the Fedora setup). Is this newer
> build easier to install system wide on Fedora? Any pointers?
I install both geda and pcb in
Thanks super. I had gone to the yum install, as when I originally built and
installed gEDA I could only get it to work in my home directory (didn't seem
to like the Fedora setup). Is this newer build easier to install system
wide on Fedora? Any pointers?
Again, thanks,
Craig
On 2/16/07, DJ Del
> Thanks super, John, DJ & Harry! Question: during my last install, I
> just used yum on Fedora to install gEDA. Would the December changes
> appear on a yum update?
Probably not; the last snapshot was just a week ago, and the previous
one was August.
> If not, can I just overwrite my current
Thanks super, John, DJ & Harry! Question: during my last install, I just
used yum on Fedora to install gEDA. Would the December changes appear on a
yum update? If not, can I just overwrite my current pcb executable with
that from the current snapshot, or is there more to do?
Many, many thanks,
--- Craig Niederberger <[EMAIL PROTECTED]> wrote:
> 1. Is it possible when autorouting traces in PCB to
> have some automatically
> set to one set of thicknesses, drill hole sizes,
> etc. and others
> automatically set to another set of thicknesses,
> drill hole sizes, etc? Or
> must I always s
> Well, my PCB arrived in the mail a short while ago. I soldered in
> the components, and everything works beautifully.
Yay! Mine's in fab now.
> 1. Is it possible when autorouting traces in PCB to have some
> automatically set to one set of thicknesses, drill hole sizes,
> etc. and others aut
On 2/15/07, Craig Niederberger <[EMAIL PROTECTED]> wrote:
Hi gEDA gurus,
3. In my next PCB, I need to add surface mount components. I've noticed
that some part data sheets spec out the pad sizes, but many don't--they just
spec out the part feet. Are there good general rules for making SMT pa
27 matches
Mail list logo
