>
> You know you can choose from different Thermal types -- press SHIFT key
> when using Thermal tool.
Thanks, that's fixed it. I can even make a direct connection without a
thermal relief, just great for a screw connection. Regards Ian.
___
geda-u
Two ways:
1. Draw thick lines through the pin, overlapping the thermal webs.
2. Edit your .pcb file and change the Thermal[] line from 0.5 to 1.0
or larger. A setting of 0.5 makes the webs as wide as the
clearance gap. Bigger settings make bigger webs. Unfortunately,
it's a board-wid
Am Dienstag, den 30.09.2008, 15:17 -0400 schrieb Ian Chapman:
> Hi all,
> I have some large currents and I have 0.250" mounting holes to connect
> to the ground plane. I can reduce the clearance using "shift k" but I'm
> not able to get a substantial thermal relief. The four traces from the
Hi all,
I have some large currents and I have 0.250" mounting holes to connect
to the ground plane. I can reduce the clearance using "shift k" but I'm
not able to get a substantial thermal relief. The four traces from the
pin annulus to the ground plane are so thin that they may evaporate
4 matches
Mail list logo