http://www.delorie.com/pcb/smd-challenge/insanity_II.jpg
I kinda mangled the pads a little, but it won't matter - I can still
solder them. The parts are 3x 0.5mm pitch CSP, some 0201 discretes,
and an 0402 LED. The big pins are 0.1" apart. Mostly 6/6 rules (some
5 mil traces), with 13 mil hole
A couple of suggestions on my experience:
- add 'gafrc' and 'gschemrc' to the terminology section. I am still
learning the extent of their functionalities and a short description
would be nice, as well as a reference to a more complete guide to syntax
and functionality. (I've seen some exampl
DJ Delorie wrote:
> I've started the second "first" board in the Getting Started manual.
Read that and looks good, don't see any typos.
> Now for the insanity...
The second module is an array of
> 128 red and green LEDs to make an 8x8 "screen".
Yes.
John G
--
Ecosensory Austin TX
___
Aha! That looks like what I want, thank you. I have seen this page,
but I didn't read past the first screen since I didn't have a design
that I was ready to sent to PCB with gsch2pcb. Also, "It assumes the
gEDA, PCB and gsch2pcb packages are already installed and ready to use"
- and I didn't
On Mon, 21 Jan 2008 11:18:55 -0500, epswint wrote:
> I haven't been able to find a start-up procedure
> for gEDA - perhaps I missed it.
Maybe you are looking for the setup section of the tutorial:
http://geda.seul.org/wiki/geda:gsch2pcb_tutorial#setup
---<(kaimartin)>---
--
Kai-Martin
Thanks for your help - but I still can't figure out how to load my own
sym files or symbol library. I haven't been able to find a start-up
procedure for gEDA - perhaps I missed it. At this point, I think I'd
better start a new thread...
DJ Delorie wrote:
Read ~/.gEDA/gschemrc file [/home/Et
> Read ~/.gEDA/gschemrc file [/home/Ethan/.gEDA/gschemrc]
Looks like it found it. I make them both pretty much identical,
because tools usually read one or the other but not both.
> My goal is to set up a component symbol and footprint libraries off of
> my home directory.
This is what I do;
Thank you very much for the documentation. I'm following it right now,
though I'm still having problems with gEDA not finding my gafrc and
gschemrc files, both of which are in ~/.gEDA:
--
Read ~/.gEDA/gschemrc file [/home/Ethan/.gEDA/gschemrc]
Did not find optional local gschemrc file [/hom
I've started the second "first" board in the Getting Started manual.
So far, it only goes through creating the schematic and symbols (no
details on those), a footprint, and the hooks you need to tie them all
together. No board work yet. This board will cover the gschem
integration, custom footpr
9 matches
Mail list logo
