Hi,
My name is Doug Thomas MD of Thomas Dermatology in Las Vegas, NV. We are in
the process of building a dermatopathology lab. We are looking to hire a
couple of histology technicians and possibly a laboratory assistant. Please
email me if you are interested at
dtho...@thomasderm.com
(Instructions For Use) The paperwork that you receive with each
reagent/solution/stain, etc.
> On Jul 22, 2020, at 3:10 PM, Muhammad Azam wrote:
>
> And IFU would be what
>
> Sent from my iPhone
>
>> On Jul 22, 2020, at 3:02 PM, Lynette Pavelich via Histonet
>> wrote:
>>
>> Carl,
>> My
And IFU would be what
Sent from my iPhone
> On Jul 22, 2020, at 3:02 PM, Lynette Pavelich via Histonet
> wrote:
>
> Carl,
> My only other thought is to do a documented study of the temperature of these
> outside storage boxes (they can be little hot/cold boxes depending on your
> location.
Carl,
My only other thought is to do a documented study of the temperature of these
outside storage boxes (they can be little hot/cold boxes depending on your
location. Because, according to the inspectors, you must be able to assure
temperature is within the required temps prior to receiving, i
You a re right, Lynette
De rigueur for Diagnostic labs!
My apologies for forgetting that ( I am now in research labs where...it is less
restricted, unfortunately).
Essential to be well-documented/adherent to SOPs.
Respectful-illy
Carl
Carl Hobbs FIBMS
Histology and Imaging Manager
Wolfson CARD
I would suggest to always refer to your reagent’s IFU insert. This will advise
at what temperature you should use/store. All inspectors (CAP, JC, CLIA, etc.)
will make you adhere to these specifications.
Unless you do a well documented validation study that goes outside of these
restrictions fr
How hot are we talking about?
San Francisco hot or Phoenix hot?
Christopher Sheeder, HT(ASCP)CMQIHC
Histology Supervisor | Department of Laboratories
Seattle Children's Hospital
4800 Sand Point Way NE
Seattle, WA 98105
Office: 206-987-6259
christopher.shee...@seattlechildrens.org
-Original
Depends on what you are doing with the sections.
IHC or just dye -staining?
Sure...too hot ( cooking) is not recommended, as stated
Also stated is that high -temp fixation may also be used with no deleterious
effects as long as the fixation time is not extended.
However, RT -ish even for a week wo
I agree with Paula. I think the doc has a legitimate concern.
Garrey
Sent from my iPhone
> On Jul 22, 2020, at 1:20 AM, Patpxs via Histonet
> wrote:
>
> Hi Erin,
>
> Often heat is applied to formalin to speed up fixation. That said there is
> probably a temperature point where it goes fr