for you!
Toni
NOTICE: This e-mail and its attachments, if any, may contain legally privileged
and/or confidential information protected by law. It is intended only for use
by the named addressee(s). If you
We have not encountered a covertile artifact with our Bond III, which we've had
for over 10 years. It may be that the covertiles need to be replaced or cleaned
more, but we have not experienced this. We also place a control tissue at the
top of the slide, and often have large patient sections o
ot as well praised or useful. Which
specials do you run, and how do they compare to what you were previously using?
How did getting one of these stainers impact your day-to-day operations? Did
the positives outweigh the negatives, if there were any.
Thank you,
Toni
-Original Message-
. What specials do you run on these stainers? Does this
significantly increase the TAT of the H&E slides? Overall, what do you like or
not like about either?
Thank you,
Toni
NOTICE: This e-mail and its at
I would suggest starting with a standard amount of water (50-500 ml) to be
tested at predetermined intervals according to your policy. Heat the water and
record the temperatures at a minimum of 3 different times. Make sure that you
are using a certified thermometer. From one test cycle to the
pital name was printed at the bottom of each slide.
So it can be done, but only if your blocks are bar-coded.
Toni
NOTICE: This e-mail and its attachments, if any, may contain legally privileged
and/or confide
Jessica,
What has Leica said about the problem? I have always found them to be
responsive and able to provide suggestions. This would be especially true with
a new instrument, still under warranty. We have never had any inconsistencies
with our Autocut, which was purchased last spring.
Toni
Our current vendor for off-set double-cytofunnel slides has discontinued their
product. If anyone uses these, I'd appreciate your vendor's information & part
number.
Vendors are welcome to reply directly to me!
Tha
Stericycle will also take your blocks and slides when you're ready to discard
them.
Toni
NOTICE: This e-mail and its attachments, if any, may contain legally privileged
and/or confidential inform
I got this reply from my Biocare rep.
We are not going out of business What happened is over a year ago we were
acquired by a Venture group, which is a good thing. They infuse money and are
making us stronger.
I too would be interested in this information.
Toni Rathborne
NOTICE: This e-mail and its attachments, if any, may contain legally privileged
and/or confidential information protected by law. It is
about specimen identification,
cross-contamination, and quality? Or do they just speed through their work
without paying attention, or are they too slow for your expectations?
Quite often these traits will carry over to other areas of a person's work
habits, and you may find that this method
pe
my input helps.
Toni McDaniel
Forensic Histotech Specialist HT, ASCP
Office of the Chief Medical Examiner
10511 LaGrange Road
Bingham Bldg. 1st floor
Louisville, KY 40223
off: 502-489-5209
fax: 502-489-5213
___
Histonet mailing list
His
corporated into the laboratory's quality management program.
Evidence of Compliance:
✓ Records of feedback and corrective action for problems identified with tissue
quality
Toni
-Original Message-
From: Steve McClain via Histonet [mailto:histonet@lists.utsouthwestern.edu]
Sent: Monday
Coordinator/ Mohs
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu<mailto:Histonet@lists.utsouthwestern.edu>
http://lists.utsouthwestern.edu/mailman/listinfo/histonet
____
Thanks,
Toni Taylor
The Doctor&#
this happening with all lot numbers, or only one? I
would check with Sakura. There may be a recall that you're not aware of. It
might also have something to do with temperature/storage conditions.
Toni
-Original Message-
From: Seeley, Heather via Histonet [mailto:histonet@list
Use a NIST certified thermometer as you would with other lab thermometers for
comparison.
Toni
-Original Message-
From: Walter Benton via Histonet [mailto:histonet@lists.utsouthwestern.edu]
Sent: Wednesday, February 03, 2016 11:57 AM
To: Fawn Bomar; histonet@lists.utsouthwestern.edu
Start with retrieval from biopsy what are they doing with the tissue
immediately after removal from body
Second, processing times are very important to. Our institution uses a short
program with watching the time in formalin to be not less than 6 hours. (This
is
For tissue that is 3 mm or les
Thanks everyone for your quick responses! The product I was looking for was
SealSAFE by Milestone.
Toni
_
From: Rathborne, Toni
Sent: Wednesday, November 11, 2015 12:01 PM
To: histonet@lists.utsouthwestern.edu
Subject: OR specimens in formalin
Good
u could respond.
Toni
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet
Stacy,
Our volume is similar, and we do have a backup embedding center. I'm sure that
you could get a used one for much less than a new one to have just for this
purpose.
Toni
-Original Message-
From: Stacy McLaughlin [mailto:stacy_mclaugh...@cooley-dickinson.org]
Sent: Monday
Yes, the last one ([Histonet] cpt codes for quantitative and semi quantitative
ihc )had no content.
-Original Message-
From: Myra Huth [mailto:mh...@baymedical.org]
Sent: Wednesday, May 13, 2015 1:04 PM
To: 'histonet@lists.utsouthwestern.edu'
Subject: Re: [Histonet] Histonet Digest, Vol
http://www.mayomedicallaboratories.com/test-catalog/Clinical+and+Interpretive/80573
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Walter Benton
Sent: Friday, March 20, 2015 2:21 PM
To: Powers, Kerry; hist
We have been very satisfied with special stain solutions from Poly Scientific
(http://www.polyrnd.com/products/stains/general/aniline-blue---masson's-trichrome.aspx).
We get an 8oz bottle for under $30. Very good customer service too.
Toni
-Original Message-
From: histonet
Did you have this microtome in to demo? If so, what was used at that time? If
not, is there an opportunity to do so before getting a PO? I can tell you that
every microtome, tissue processor, stainer, coverslipper, and IHC instrument we
have ever purchased has been brought in as a demo first.
We use a device from Mopec.
http://media3.mopec.com/media/pdf/AutopsyAccessories(Page76).pdf
It's manual, but works great.
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Jason McGough
Sent: Tuesday, Feb
I would contact Leica and ask. They're very good about sending electronic
versions of their manuals.
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Scott, Allison D
Sent: Thursday, February 12, 2015 12:48
What a great resource. How does Sterile Processing package them for you?
-Original Message-
From: Mike Pence [mailto:mpe...@grhs.net]
Sent: Wednesday, February 11, 2015 9:42 AM
To: Rathborne, Toni; histonet@lists.utsouthwestern.edu
Subject: RE: Sterile slides for FNA
We make our own
, and are these available in a small quantity so that there is no
waste?
Vendors are welcome to reply to me directly, unless others would like the
information as well.
Toni
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http
We will provide assistance weekdays with staff that accession and stain the
case.
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Houston, Ronald
Sent: Monday, February 09, 2015 10:51 AM
To: Mike Pence; 'l
To comply with Joint Commission standards, ours are stored 6" off the floor.
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Fawn Bomar
Sent: Tuesday, February 03, 2015 8:48 AM
To: histonet@lists.utsouthwes
Thank you everyone, I now have the manual. Amazing response time!
Toni
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Rathborne, Toni
Sent: Tuesday, January 20, 2015 2:39 PM
To: histonet
I'm looking for a copy of a User's Manual for our VIP 5. If anyone has one that
they could send it would be greatly appreciated!
Toni
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet
I was approached by one of my pathologist with this question. Does anyone
perform influenza IHC?? Contact me if you do or have any info referencing that
specific testing ability.
Toni McDaniel-Martin
Forensic Histotech Specialist HT, ACSP
University of Louisville Forensic Pathology
810
and cutting slides specifically for this purpose.
Any guidance in this would be greatly appreciated!
Toni Rathborne
Pathology Supervisor
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet
I found this in my inbox right after your email Marilynn. Thought it would be
worth sharing with everyone.
Toni
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of
rmweber...@comcast.net
Sent: Friday
se for all
temperature-dependent equipment and environments using a calibrated
thermometer."
Toni
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Elizabeth
Chlipala
Sent: Wednesday, December 03, 2014 2:19 PM
T
We use whatever is the narrowest range for the reagents stored in there. So if
there is one reagent with a range of 4-10°C, and another with 2-8°C, we'll use
4-8° as our range.
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwest
In the All Common checklist, COM.30750, a Phase II, addresses this and it is a
requirement.
"Temperatures are checked and recorded each day of use for all
temperature-dependent equipment and environments using a calibrated
thermometer."
-Original Message-
From: histonet-boun...@lists.u
We use a numeric for the accession number (S-14-1234), followed by alpha for
the specimen(A, B, C), and within that have numeric for the number of blocks in
each specimen (A1, A2, A3). We haven't ever gone to "Z" in our current LIS, and
the ability to add unlimited blocks to each specimen makes
Where can we find more information on this?
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Weems, Joyce K.
Sent: Monday, November 10, 2014 4:39 PM
To: histonet@lists.utsouthwestern.edu
Subject: [Histonet]
As part of reporting all work related injuries, we investigate the cause or
contributing factor and determine if the injury could have been avoided, and
how to do so in the future. These types of injuries happen infrequently, so we
have not done regular in-services. It is a good idea though, and
I had an employer years ago who used this. The disadvantage that bothered me
the most was the paraffin shavings flying around due to lack of moisture. It
created a very "dirty" environment, and there were frequent floaters due to the
difficulty in keeping the microtome blade clean. I wouldn't re
We have a Bond III, and although we use the Apex slides from Leica, we are not
required to do so. We have 3 different manufacturer's slides validated should
the Apex slides go on backorder.
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists
Leica Apex slides.
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Goins, Tresa
Sent: Wednesday, October 29, 2014 2:53 PM
To: Heckford, Karen - SMMC-SF; histonet@lists.utsouthwestern.edu
Subject: [Histonet]
Since ANP 22983 has been changed to state that breast fixation in formalin is
between 6-72 hours, we no longer have staff come in on weekends.
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Weems, Joyce
You might be able to get around this by doing the IHC on all of these as
requested, but only charging for those which are indicated as being medically
necessary. This could benefit your TAT, if that's the reason the pathologist
wants these done routinely. The pathologist would also have to agree
How do you like Vantage? Have you experienced any problems with it, and is it
easy to use?
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of WILLIAM DESALVO
Sent: Friday, October 03, 2014 4:02 PM
To: Tapper,
Yes, more often than you may imagine. Unexpected findings are always called and
documented. See ANP12175. Although not required, another reason is the courtesy
extended by the pathologist to the physician. This may occur if a preliminary
report is to be issued, or the final report not signed out
What is staff doing at their desks? Are the desks located in a work area where
specimens or chemicals are? If not, and the desk area can be clearly separated
from the work area, then maybe you could have a sign posted in each area. "No
food or drink permitted in this area" or "Food and drink p
Ours are incinerated because of the PHI.
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of WILLIAM DESALVO
Sent: Thursday, July 10, 2014 4:56 PM
To: Vincent Rivera; 'Cooper, Brian'; JOSEPH FRAZEE; histonet
Su
Would you share the source for the sentinel lymph node recommendation
mentioned? Although I just did a quick search, I didn't see anything on the CAP
website.
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf
Is your alcohol level as high as or higher than the level of eosin in the
containers? If there is residual eosin left at the upper portion of the slide,
that could be causing the problem.
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.u
otherwise released to others (e.g. pacemaker
or prosthesis to manufacturer) must be disinfected before release.
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Rathborne, Toni
Sent: Monday, May 05, 2014 4:35
You may want to consider the CAP checklist which has recently been revised.
**REVISED** 04/21/2014
ANP.24200
Biohazard Waste Disposal
Can you cite a source for the MU requirement?
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Jesus Ellin
Sent: Friday, April 25, 2014 11:25 AM
To: 'Mike Pence'; 'Victor A. Tobias'; histonet@lists.utsouthw
CAP inspectors may have opinions which differ from our own, and their
interpretation of standards may also be different. Have you challenged this
deficiency with CAP?
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] O
Security is responsible for the release of bodies to funeral homes, and all
staff must contact Security to access the morgue. We have found that to be the
best way to avoid being questioned about anything. We have stretchers here not
drawers, so I can't respond to that.
-Original Message---
Our experiences have not been that bad with regard to electronic ordering. We
still do get the paper requisitions with the specimens, but they are bar code
scanned when accessioned in the grossing area. We got a lot of help from our IT
department, through a joint effort with the OR and other sub
n the paper requisition when and
who was called with frozen results. Although this is a small percentage of the
specimens we receive, it stalled the project. How do you get around this?
Toni
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet
Happy Friday!
I was wondering, for the labs that are using the slides for IHC that have a
place for the control tissue and the patient tissue, which vendor would you
recommend. I also would not mind being contacted directly by vendors who wish
to inform me of their products.
Thanks,
Toni
Another benefit of someone coming in from the outside (Leica did the same for
us), is that since this is what these people do every day, management is more
likely to listen to their suggestions. If it's the same as yours then that
would reinforce your current plans. If it's different than what y
Our pathologists prefer to perform all aspects of frozen section preparation.
We will stain for them, but they would rather gross and section themselves.
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Lea
I am looking for a VIP 2000 or 3000; preferrably benchtop but a floor model
will not be turned away. Does anyone know of a reliable source to start looking
for this machine I see some on sale at random sites but not sure of the site
integrity. So if there are any goods sites that are know please
Are they looking for documentation that it's been checked, or will they take
your word for it?
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Eytalis, Robert
A
Sent: Tuesday, January 07, 2014 10:51 AM
To
Safety glasses, counter top shield, lab coats. A fire blanket is another safety
measure you could look into. Be sure that sprinklers are tested periodically,
and that all flammables are in a safety cabinet.
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histo
Could it be the heating/deparaffinization process? If the upper sections are
staining more evenly, then maybe they are free from residual paraffin. Try
extending the time in the ovens and/or xylene.
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun
I really like the idea of a waiver/re-label form. Other than approval from the
Laboratory Director, did you have to get approval from any other departments to
put this form into use?
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsout
We have a book for each area that sends us specimens. A patient label is placed
in the book by the collecting location, with the number of containers
collected. The person who places the labels/specimen in the bin will initial
the book. When the specimen is received(either picked up or delivered
Another option would be for them to place the placenta in an empty bucket, then
add the formalin. This would eliminate the possibility of a splash injury.
From: Patrick Laurie [mailto:foreig...@gmail.com]
Sent: Monday, November 18, 2013 3:37 PM
To: LeAnn Lang
Cc: Rathborne, Toni; Will Chappell
Did they state which OSHA standard you were in violation of?
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Will Chappell
Sent: Monday, November 18, 2013 3:06 PM
To: LeAnn Lang
Cc:
Subject: Re: [Histonet
Your Sales/Service rep should be able to suggest something. We have one for our
VIP and were assisted by the company.
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Juliana Montero
Sent: Monday, November
I wouldn't be too quick to blame the blades. Have you changed paraffin
brands/temperatures or changed any of your processing schedules? Is the
fixative/fixation process the same? Is the collecting location doing anything
different/have they had a change in staff?
Also, what type of blades are y
Another suggestion would be to go through the Histonet archives to see what
problems people have questioned/reported over the last year. Don't forget about
the bulk waste either. When we had considered Ventana, the waste
(hazardous/non-hazardous) was combined - it may not be now, I haven't check
We have the Leica ST5020, which has the capability to store multiple programs
(we have over 10). It has a total of 40 stations, of which 4 are ovens, and
another 4 are washes. We also have the (optional) CV5030 which is the
coverslipper which attaches to it. While the stainer is not the quickest
Avantik is located in NJ and services cryostats in addition to microtomes,
processors and stainers.
www.avantik-us.com
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Jean Ross
Sent: Monday, October 28, 2
If they are hospital employees, you should have a little more say in what goes
on in the lab. Is there a policy which addresses this? If not, now might be a
good opportunity to draft one and have the Medical Director sign off on it. You
can also get your Infection Control department involved if
We use Dako's polyclonal on our Bond III, diluted 1:400, catalog A4502.
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Elizabeth
Chatfield
Sent: Monday, October 07, 2013 5:59 AM
To: histonet@lists.utsout
For those of you who use the 40% formaldehyde, how long is you fixation time on
frozen slides? We use 10% NBF with 1 minute to fix, but sometimes it gets
hectic if you have multiple frozens all at once.
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet
Do you have a link to where we could see them?
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Roberta Horner
Sent: Friday, September 27, 2013 7:21 AM
To: histonet@lists.utsouthwestern.edu
Subject: RE: [Hi
Looking for opinions on this cryostat. Has anyone used it? What is the Cold D
like to use? How often is the solution replaced? What about the Vacutome? It
sounds like a nice feature along with the Automatic Cryo-Approach.
Appreciate all responses.
Thanks,
Toni
Have you tried asking on UCern? uCern Admin
or
https://cernercare.com/accounts/login?returnTo=https%3A%2F%2Fconnect.ucern.com%2Fjiverp%2Fopenidendpoint.jspa%3Fprovider%3Dhttps%253A%252F%252Fcernercare.com%252Faccounts%252Fopenid%26destination%3D%252Femaildigestprofile.jspa#
uCern is a forum simila
Is this on the CLIA website? I agree that it's difficult to find anything on
there. If you're able to provide a direct link that would be great!
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Rene J Bues
We've been doing this for years. You'd be surprised with the overall savings
(slides, frequency of changing stains, storage), and also TAT since you'll be
able to put through more cases on your stainer.
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-
We also have Belair here in NJ. They have always done good work for us.
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Walter Benton
Sent: Tuesday, September 10, 2013 7:25 AM
To: Fawn Bomar; histonet@lists
I wonder if this method could be used with the product Histogel. Has anyone
tried it?
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Tom McNemar
Sent: Friday, September 06, 2013 5:46 AM
To: 'Ann Specian';
How do you validate IHC & FISH with a new processor?
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of joelle weaver
Sent: Wednesday, August 28, 2013 9:23 AM
To: dianar...@aol.com; histonet@lists.utsouthwest
Rene,
You stated that immunoreactivity is not weakened by the use of IPA. Do you know
how the use of IPA might affect FISH results?
Toni
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Rene J Buesa
Sent
ials internally? Thanks in advance for your responses, and have a
great weekend!
Toni
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet
Personal preference is something we try to accommodate within reason. Each of
our techs have their own tools (brush, forceps, etc.) which they take care of
and clean after each use. The more comfortable a person is with a specific
tool, the more accurate and efficient they will likely be. If yo
We have had success with this also. If you got the unit new, I believe that
there should have been one extra bottle with it.
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Gudrun Lang
Sent: Saturday, Augu
If the slides are well dried, you can also bunch them together and wrap in a
paper towel if you don't have too many. Tape when wrapped, then place in a
slide box and insert in a padded envelope for shipping.
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:hist
e.com<mailto:trathbo...@somerset-healthcare.com> .
Toni Rathborne
Pathology Supervisor
Somerset Medical Center
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet
So would I. Once the initial quirks were worked out, it rarely has a problem.
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Horn, Hazel V
Sent: Thursday, March 21, 2013 3:26 PM
To: 'Bruce Gapinski'; 'h
We are able to view a pending log. Once a patient is in the OR, nurses will
place an order for the specimen. If we have not received the specimen in the
anticipated time, we will call.
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utso
Maybe one of the used equipment vendors would consider a short-term lease with
option to buy.
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of MARCELLYN A.
STONE
Sent: Wednesday, March 13, 2013 7:14 AM
To:
This was discussed at great length last year. You can check the archives for a
lot of responses.
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Vickroy, Jim
Sent: Tuesday, March 12, 2013 2:49 PM
To: hist
We have been disposing of our alcohols like this for years. This would include
alcoholic eosin too. We are allowed to mix the waste xylene with the alcohols
because they are the same classification, and treated the same way.
-Original Message-
From: histonet-boun...@lists.utsouthwestern.
We have actually had someone come in on Sundays just for this reason. An option
for you might be to try this, and have that person put in a full day. He/she
could then take off Monday. It has worked well for us. We also are able to get
IHC cases done over the weekend so they can be given to the
Where are you located?
-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Stella Mireles
Sent: Tuesday, January 15, 2013 9:10 AM
To: histonet@lists.utsouthwestern.edu
Subject: [Histonet] Independent Equipment
1 - 100 of 285 matches
Mail list logo
