You can just go to HMC and do a PCHID reassign from bad one to a good
one in same or in another Escon Card.
Carlos Bodra
IBM Certified Specialist System z
Sao Paulo - Brazil
Em 21/07/2011 16:32, Sherry Everhart escreveu:
Hello Everyone,
I am interested in knowing how to configure a
Hi List!
In z10 HMC under Automatic Activation Profiles, I can found following
MODES under Processor tag for each LPAR defined:
ESA/390 - OK! It´s for traditional CP´s to run z/vm, z/vse and z/OS
ESA/390 TPF - OK! I never saw a TPF system running... (forgot it)
Coupling Facility: OK! Name alre
Hello.
I need to prepare a migration from an old OS/390 2.5 to z/OS 1.4 over a
z890 machine.
Can I use z/VM 5.4 as host to a z/OS 1.4 guest? OS/390 2.5 will continue
to run over a 9672
until all has been migrated to z/OS.
z/OS 1.4 could run in compatibility mode or not, but this is another
Hardware Memory configuration for Main Storage and XSTORE
for VM
Larry Davis**
*From:*The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU]
*On Behalf Of *Carlos Bodra - Pessoal
*Sent:* Wednesday, April 20, 2011 6:39 PM
*To:* IBMVM@LISTSERV.UARK.EDU
*Subject:* Re: z/VM RedHat Virtual
19:24, Davis, Larry (National VM/VSE Capability) escreveu:
Are you Running VM on this or zLinux only on an LPAR?
Larry Davis**
*From:*The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU]
*On Behalf Of *Carlos Bodra - Pessoal
*Sent:* Wednesday, April 20, 2011 6:19 PM
*To:* IBMVM
Hi s390x Gurus
I´m new to Linux on z and we are conducting a POC test of Linux Red Hat
with Oracle running under z/VM 5.4 RSU 1003
and a z/10 BC model A00 (IFL Only).
If linux virtual machine is defined with 64G in directory we got an
abend during startup (see below). Doing some tests I fo
http://www-01.ibm.com/common/ssi/ShowDoc.jsp?docURL=/common/ssi/rep_ca/8/897/ENUS111-078/index.html&breadCrum=DET001PT022&url=buttonpressed=DET001PT116&page=1000&paneltext1=DET001PEF011&user+type=EXT&lang=en_US&InfoType=AN&InfoSubType=CA&InfoDesc=Announcement+Letters&panelurl=index.wss%3Fbuttonpre
Sherry
Order PTF UV97540 and you will got lastest RSU for z/VM 5.4. (1008)
I did it eletronically and applied it a couple of days ago and a lot of
PSP reported ptfs was installed.
You can use Auomated Installation and Service (I never tried!) or
Service Guide (I used this, since I working with
Hello
I was checking how z/vm 5.4 supports 3592-E05 (TS1120) installed into a
library 3577-L5U.
I have a 3592-C06 ficon attachment to connect z10 to tape drive. I can
load, write, read and
unload cartridge using 3577-L5U operator panel. I was unable to find out
how to tell to z/vm
to pick up c
If you have access to shopzseries our ibmlink(servlink) check PSP for
2098Device.
If you z/vm is at 1003 level you will need to apply about 13 ptfs that
isn´t included in RSU.
I did this just a week ago upgrading from 0903 level running in z890 to
1003 to run in z10-BC.
Now working in 2107Dev
Hi listners.
I was checking erep output to try to discover more about MCIC (Machine
Check Interruption Code) and found following register,
but I checked 02 Erep manuals, (User´s Guide Manual and Reference
Manual), but can´t found any description how to readout these
little dump.
We are runni
How can I readout these Machine Check occurring in a MP3000 running
zVm 4.40
07:13:06 HCPMCI9101I MACHINE CHECK ON CPU . MCIC = 04000F3D 400B
07:13:06 System operation continues.
07:53:45 HCPMCI9101I MACHINE CHECK ON CPU . MCIC = 04000F3D 400B
07:53:45 System operation contin
Hi
We are in process to configure some area of our 2105-800 to be used by
open systems.
We start process and when we try to building host access (option modify
host), we got in ESS Specialist console following
message:
ERROR 1199 Information server problem. An unknown server error occurred.
Hi listners,
Just to tell that we get out 2105-F20 connected to z10 BC via FCP this
weekend via switch 2005-B16.
Seems that we have a problem with 2105-800 that we was trying to
connected earlier. We will check ESS800
to find what is wrong.
Thanks for all that send tips and hints.
--
Carl
Hi Alan,
Yes, I changed IOCDS and did a power on reset. Since this machine isn´t
in production, I can do POR as I need.
Carlos Bodra
IBM zSeries Certified Specialist
Sao Paulo - Brazil
Em 27/09/2010 14:03, Alan Altmark escreveu:
On Monday, 09/27/2010 at 12:55 EDT, Carlos Bodra
2455 South Road
Poughkeepsie, NY 12601
(845) 435-8666, T/L 295-8666
rayhi...@us.ibm.com
*Carlos Bodra - Pessoal *
Sent by: The IBM z/VM Operating System
09/27/2010 10:53 AM
Please respond to
The IBM z/VM Operating System
To
IBMVM@LISTSERV.UARK.EDU
cc
Subject
If you have a scsi vm
system, then use the fcp info that you installed with.
Ray Higgs
System z FCP Development
Bld. 706, B24
2455 South Road
Poughkeepsie, NY 12601
(845) 435-8666, T/L 295-8666
rayhi...@us.ibm.com
The IBM z/VM Operating System wrote on
09/27/2010 11:12:03 AM:
> Carl
Robert,
Yes, 2109 and 2005 were zonned to allow z10 access. Same zone was used
to test access to intel, so
zonned is working ok.
I can´t bring up a linux image, since I´m not able to define storage to
be used by this image. My problem is
before try to bring up zvm 5.4 or linux under it.
Ca
Hi
I´m trying to connect a z10 to a shark using FCP protocol, but without
success.
We did some tests that are describe below:
1 - Connect z10 to shark 800 sw2 adapter with both sides defined as
Ficon. Works fine
2 - Connect z10 to shark 800 sw2 adapter with both sides defined as FCP.
Dire
zvm 6.1 needs ALS 3 only available in z10 and z196 actually.
Carlos Bodra
IBM zSeries Certified Specialist
Sao Paulo - Brazil
Em 07/09/2010 00:36, mohd rizal escreveu:
Hi,
I tried to install z/VM version 6.1 on our z9 BC machines but it seems not
working. Documented in the Cookb
Warning: This email was cross posted to IBM-MAIN, IBMVM and VSE-L Lists.
As z196 has a code name of *Gryphon* before announcement, other zSeries
has similar names, as *T-Rex* (z990??)
*Pterodactylus*/ (z890???)
Anyone has all family names?
z900 -
z800 -
z990 - /*T-Rex*/
z890 - /*Pterodactylu
Hi Scott
We have a z10 BC (2098-K01) running native with IBM 2105 Model F20
(3390-3 and 3390-9 volumes) and IBM 2105 Model 800 (3390-3 and 3390-9
volumes) without problems.
They are connected to z10 via 2 Ficon (primary path) and 04 Escon
(backup propose only - even I never used it, but teste
Good luck and thanks for your support over all these years!
Carlos Bodra
IBM zSeries Certified Specialist
Sao Paulo - Brazil
Em 02/09/2010 11:48, Alan Altmark escreveu:
Effective September 16th, after nearly 28 years in VM Development, I am
moving to a new role as a member of IBM
Hi Sergio,
Unless you have 3592 drive installed into a 3494 or 3584 you can´t use
it as a library if installed in a
3577-L5U. This unit is recognized as library only for open systems, not
for mainframe.
Drive units 3592 installed into a 3577 L5U are recognized by mainframe
systems as standalo
Sergio,
Hello. Good to listen from you.
If your z/vm is 5.4 or 6.1 VM Perf Tool Kit is installed in basic
restore (initial ddr) as a feature, but not enable.
Its a priced feature, so implies in licensing it from IBM. It´s a very
good monitor, a mix of old RTM/ESA and MONITOR.
If you run lin
Hello Listners
I have following situation as response of Q DASD DETAILS
Q DASD DETAILS 300
CUTYPE = 3990-E9 DEVTYPE=3390-0A
Q DASD DETAILS A00
CUTYPE = 3990-CC DEVTYPE=3390-0C
Q DASD DETAILS B00
CUTYPE = 3990-E2 DEVTYPE=3390-0A
Address 300 is a volume in IBM 2105-800
Address A00 is a volume i
26 matches
Mail list logo