> Shimon,
> Thanks for the corrections! They have all been included in V1R1. Before
sending V1R1 to the list,
...
Oops!
Note to self: check the "To:" address very carefully before replying! :-(
Mike Walter
Hewitt Associates
The opinions expressed herein are mine alone, not my employer's.
tz
> Sent: Saturday, September 05, 2009 11:21 AM
> To: IBMVM@LISTSERV.UARK.EDU
> Subject: Re: "RELABEL SYSRES" was: Re: Backup RES Labeling Question
>
> Good work Mike!
> A few comments after a brief scan of your document are embedded below:
>
>
> >
Good work Mike!
A few comments after a brief scan of your
document are embedded below:
> 6) When the "STAND ALONE PROGRAM LOADER:" screen
> appears, under the
> line "IPL PARAMETERS" enter:
>
> cons=console_vdev
gh to read it and
advise.
--- On Sat, 9/5/09, Paul, Thomas wrote:
From: Paul, Thomas
Subject: Re: Backup RES Labeling Question
To: IBMVM@LISTSERV.UARK.EDU
Date: Saturday, September 5, 2009, 10:00 AM
Howard, Here is the attachment and how to do this. Please remember to make
changes that fi
t; vmfsetup zvm cms
==> sampnss cms
==> i 190 cl parm savesys cms
==> vmfbld ppf segbld esasegs segblist ( all
-Original Message-
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf
Of Howard Rifkind
Sent: Friday, September 04, 2009 9:22 PM
To
Sorry, Howard, I left off the ":-)" at the end of the note
DJ
Howard Rifkind wrote:
Easy there big fella...
--- On *Fri, 9/4/09, Dave Jones //* wrote:
From: Dave Jones
Subject: Re: "RELABEL SYSRES" was: Re: Backup RES Labeling Question
To: IBMVM@LISTSE
Thanks Scott,
--- On Fri, 9/4/09, Wandschneider, Scott
wrote:
From: Wandschneider, Scott
Subject: Re: Backup RES Labeling Question
To: IBMVM@LISTSERV.UARK.EDU
Date: Friday, September 4, 2009, 1:11 PM
Changing VM VOLSERs
Logon as MAINT.
Attach nnnRES volume to the base z
Easy there big fella...
--- On Fri, 9/4/09, Dave Jones wrote:
From: Dave Jones
Subject: Re: "RELABEL SYSRES" was: Re: Backup RES Labeling Question
To: IBMVM@LISTSERV.UARK.EDU
Date: Friday, September 4, 2009, 1:04 PM
EHowardit's at the bottom of Mike's note
14. IPL the new system.
Thank you,
Scott
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf
Of Howard Rifkind
Sent: Friday, September 04, 2009 11:44 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: Backup RES Labeling Question
Scott, think you forgot to a
Howard Rifkind
Sent: Friday, September 04, 2009 9:44 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: Backup RES Labeling Question
Scott, think you forgot to attach your procedure...
And thanks all.
--- On Fri, 9/4/09, Wandschneider, Scott
wrote:
From: Wandschneider, Scott
Oops sorry – Try this
Thank you,
Scott
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf
Of Howard Rifkind
Sent: Friday, September 04, 2009 11:44 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: Backup RES Labeling Question
Scott, think you forgot to attach
Yes - relabel the volume.. it was unnecessary to label and format the new
volume in the first place - you could have just done the DDR and run CPFMTXA
to relabel it.
If you really needed to IPL from it - you'd likely need to change the volume
to 54GRES first.. (and relabel the 'real' 54GRES to
EHowardit's at the bottom of Mike's note
Howard Rifkind wrote:
How and where can I (we) retrieve you write up?
--- On *Fri, 9/4/09, Mike Walter //* wrote:
From: Mike Walter
Subject: "RELABEL SYSRES" was: Re: Backup RES Labeling Qu
Scott, Just forward it to my email address.
--- On Fri, 9/4/09, Wandschneider, Scott
wrote:
From: Wandschneider, Scott
Subject: Re: Backup RES Labeling Question
To: IBMVM@LISTSERV.UARK.EDU
Date: Friday, September 4, 2009, 12:38 PM
Here
is the procedure I use to change VM VOLSERs
, 2009 9:44 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: Backup RES Labeling Question
Scott, think you forgot to attach your procedure...
And thanks all.
--- On Fri, 9/4/09, Wandschneider, Scott
wrote:
From: Wandschneider, Scott
Subject: Re: Backup RES Labeling Question
To: IBMVM@LISTSERV.UARK.EDU
Scott, think you forgot to attach your procedure...
And thanks all.
--- On Fri, 9/4/09, Wandschneider, Scott
wrote:
From: Wandschneider, Scott
Subject: Re: Backup RES Labeling Question
To: IBMVM@LISTSERV.UARK.EDU
Date: Friday, September 4, 2009, 12:38 PM
Here
is the procedure I
@LISTSERV.UARK.EDU
Subject: Re: Backup RES Labeling Question
Just creating a copy of the sysres volume to use for testing.
--- On Fri, 9/4/09, Wandschneider, Scott
wrote:
From: Wandschneider, Scott
Subject: Re: Backup RES Labeling Question
To: IBMVM@LISTSERV.UARK.EDU
Date: Friday, September 4
The CPFMTXA command can relabel the volume. This is required after you co
py
the orginal volume.
CPFMTXA vdev volid Label
Then you have the problem that the object (and maybe the source) director
y
on 54GBRS has all of the volsers pointing at 54GRES. Now, this may not be
a
problem if your recov
Just creating a copy of the sysres volume to use for testing.
--- On Fri, 9/4/09, Wandschneider, Scott
wrote:
From: Wandschneider, Scott
Subject: Re: Backup RES Labeling Question
To: IBMVM@LISTSERV.UARK.EDU
Date: Friday, September 4, 2009, 12:29 PM
Are
you referring to “cloning
ct: Backup RES Labeling Question
Hello all,
I had been asked to make a backup copy of the SYSRES volume, volulme id
54GRES, and was provide with a DASD address of 6027 and a new volume id
of 54GBRS.
I did a CPFMTXA on 6027 with the volume id of 54GBRS and formatted the
entire volume as P
Hello all,
I had been asked to make a backup copy of the SYSRES volume,
volulme id 54GRES, and was provide with a DASD
address of 6027 and a new volume id of 54GBRS.
I did a CPFMTXA on 6027 with the volume id of 54GBRS and
formatted the entire volume as PERM.
I then ran DDR and did
21 matches
Mail list logo