> However, printouts can be produced in VSE in two
> different ways - via SYSLST (system logical unit) or a numbered SYS
> (e.g., SYS010 - program logical unit). STDOPT affects only SYSLST
> output.
Ok... I found the problem. I was in fact using
a numbered sys, which was assigned to a
logi
>
> To put it another way, if your program is using a program logical
> unit (a numbered SYS), STDOPT LINES= won't help.
Thank you to Ron and Tom for your suggestions.
The program on VSE is an Assembler utility writing
to numbered SYS (I don't recall which right now).
I was hoping for an easy
>> >
>> >The printing itself is being done with NO page size control
>> >in the application, just keep spewing out the lines till it's done.
>>
>> You need to define a PCL command (via the link PREFIX string) to tell
>> the printer how many lines/page for the print output. Remember to
>> use the s
From what's been written, I presume that the carriage control that
VSE uses would be preserved if it existed. Using // STDOPT LINES=
is a way to influence VSE's production of carriage control
characters. However, printouts can be produced in VSE in two
different ways - via SYSLST (system log
Hi Shimon,
You've tried using
// STDOPT LINES=nn
in your job to change the default number of lines on the page for your job?
On 3/26/07, Shimon Lebowitz <[EMAIL PROTECTED]> wrote:
> >
> >The printing itself is being done with NO page size control
> >in the application, just keep spewing out t
> >
> >The printing itself is being done with NO page size control
> >in the application, just keep spewing out the lines till it's done.
>
> You need to define a PCL command (via the link PREFIX string) to tell
> the printer how many lines/page for the print output. Remember to
> use the suffix
>> If you are printing from CMS to a printer on RSCS
>
>But I am not. My output is being generated on VSE
>and going via NJE to RSCS to be printed, using a
>"DEST=" parameter on the LST card.
>
>The printing itself is being done with NO page size control
>in the application, just keep spewing out t
> If you are printing from CMS to a printer on RSCS
But I am not. My output is being generated on VSE
and going via NJE to RSCS to be printed, using a
"DEST=" parameter on the LST card.
The printing itself is being done with NO page size control
in the application, just keep spewing out the line
Shimon,
Would the LINECOUNT parameter for the CMS PRINT command do what you want to do?
On 3/26/07, Ron Schmiedge <[EMAIL PROTECTED]> wrote:
Hi Shimon,
If you are printing from CMS to a printer on RSCS (LPR or otherwise)
and the CMS file doesn't contain carriage control, isn't CMS the one
that
Hi Shimon,
If you are printing from CMS to a printer on RSCS (LPR or otherwise)
and the CMS file doesn't contain carriage control, isn't CMS the one
that is breaking it up into 60 line pieces? You would have to tell CMS
it has an 80 line (or whatever) printer when it formats its output.
On 3/26/
I am sending files via RSCS to be printed on
an LPR link, without any carriage control.
The link is defined with EXIT=LPRXONE.
The printed output (on portrait mode paper)
is only 60 lines per page.
How can I control the page size (in lines) of
an LPR link? I would like to increase it
conside
11 matches
Mail list logo
