LISTSERV.UARK.EDU
>
> cc
>
> Subject
>
> Re: z10 shark 800 and FCP
>
> Ray,
>
> Sorry for a not so clear definition.
>
> What happens is that we are trying to define Open System Storage in
> ESS800 and when we try to allocate dasd space to z10 (open space
&
:
> Carlos Bodra - Pessoal
> Sent by: The IBM z/VM Operating System
>
> 09/27/2010 12:49 PM
>
> Please respond to
> The IBM z/VM Operating System
>
> To
>
> IBMVM@LISTSERV.UARK.EDU
>
> cc
>
> Subject
>
> Re: z10 shark 800 and FCP
>
>
gt;
> 09/27/2010 12:53 PM
>
> Please respond to
> The IBM z/VM Operating System
>
> To
>
> IBMVM@LISTSERV.UARK.EDU
>
> cc
>
> Subject
>
> Re: z10 shark 800 and FCP
>
> Ray,
>
> Just to clarify, can I connect directly z10 port defined
That'll be easier to drive the initial fabric and device login that
the ESS is looking for, but I'm not as familiar with how you'd use the
VM tools to debug zoning or lun masking issues - I'm more familiar
with the Linux tools.
If you're more of a VM person than a Linux person it's probably a
bett
>It's a chicken and egg problem: you need Linux to connect to the ESS
>so that you can create the LUN to attach to Linux.
Couldn't you accomplish the same result by defining an EDEV with a
non-existant LUN through VM?
-
Please consider the environment bef
If you wish to have the z10's WWPN appear in the ESS you'll have to
get a Linux image up and running first and attempt to configure the
non-existant LUN. This can be either an existing image installed on
ECKD DASD or the Linux Installation media loaded from the VM RDR.
It's a chicken and egg probl
Hi Alan,
Yes, I changed IOCDS and did a power on reset. Since this machine isn´t
in production, I can do POR as I need.
Carlos Bodra
IBM zSeries Certified Specialist
Sao Paulo - Brazil
Em 27/09/2010 14:03, Alan Altmark escreveu:
On Monday, 09/27/2010 at 12:55 EDT, Carlos Bodra
On Monday, 09/27/2010 at 12:55 EDT, Carlos Bodra - Pessoal
wrote:
> As I describe in previous email, ports (at ess800 and z10) and fibre
cable are
> ok, since if I chance ports to Ficon protocol all works fine.
>
> A question arrised now: ports are SX (shot wave) in both sides, cable
could
Ray,
Just to clarify, can I connect directly z10 port defined as FCP (IOCP)
to a ESS800 SW2 defined FCP? (no switch needed)
Carlos Bodra
IBM zSeries Certified Specialist
Sao Paulo - Brazil
Em 27/09/2010 12:20, Raymond Higgs escreveu:
Carlos,
z10 with ESS800 should work fine p
os Bodra - Pessoal
> Sent by: The IBM z/VM Operating System
>
> 09/27/2010 11:12 AM
>
> Please respond to
> The IBM z/VM Operating System
>
> To
>
> IBMVM@LISTSERV.UARK.EDU
>
> cc
>
> Subject
>
> Re: z10 shark 800 and FCP
>
> Robert,
>
> Ye
Sent by: The IBM z/VM Operating System
>
> 09/27/2010 11:12 AM
>
> Please respond to
> The IBM z/VM Operating System
>
> To
>
> IBMVM@LISTSERV.UARK.EDU
>
> cc
>
> Subject
>
> Re: z10 shark 800 and FCP
>
> Robert,
>
> Yes, 2109 and 2005
: Monday, September 27, 2010 5:12 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: z10 shark 800 and FCP
Robert,
Yes, 2109 and 2005 were zonned to allow z10 access. Same zone was used to test
access to intel, so
zonned is working ok.
I can´t bring up a linux image, since I´m not able to define
Carlos,
z10 with ESS800 should work fine point-to-point. That config was tested a
lot here in Poughkeepsie. We don't have a ds4700. It should work though.
There is some configuration that needs to be done inside linux. You need
to tell linux which busid (device number), target wwpn, and lun
@LISTSERV.UARK.EDU
Subject: Re: z10 shark 800 and FCP
Robert,
Yes, 2109 and 2005 were zonned to allow z10 access. Same zone was used to test
access to intel, so
zonned is working ok.
I can´t bring up a linux image, since I´m not able to define storage to be used
by this image. My problem is
before try to
Robert,
Yes, 2109 and 2005 were zonned to allow z10 access. Same zone was used
to test access to intel, so
zonned is working ok.
I can´t bring up a linux image, since I´m not able to define storage to
be used by this image. My problem is
before try to bring up zvm 5.4 or linux under it.
Ca
Is the 2109 zoned to allow the z10 to access the storage device?
Did you IPL a linux guest or LPAR and use it to drive a fabric login
or fabric discovery ?
The ESS and DS4700 will only show you the hosts which have contacted
them, since they don't do discovery of the host systems. The z10 will
no
16 matches
Mail list logo
