i tried to load the AHT Image for the Snow White iMac and all i get is a
flashing blue globe Icon before it goes to the old OS9 flashing Folder icon
then it boots into OSX
On Fri, Dec 25, 2015 at 12:17 AM, Google wrote:
> Practically nothing is interchangeable between an early tray-loader and a
Practically nothing is interchangeable between an early tray-loader and a
slot-loader, except the hard drive. But you’ll find that out. :^)
Jim
> On Dec 24, 2015, at 8:03 PM, Thomas Fritsch wrote:
>
> Aaaactually. i Do. pulled a board from a bustedscreen G3-233, (blue first gen
> slot loading
Aaaactually. i Do. pulled a board from a bustedscreen G3-233, (blue first
gen slot loading) the one thatwe're discusing here is a "Snow White G3-600"
On Thu, Dec 24, 2015 at 10:32 PM, Google wrote:
> So try installing OS X from a cold start with the ethernet cable
> disconnected. If it loads wit
So try installing OS X from a cold start with the ethernet cable disconnected.
If it loads without a problem, then you’ve got a bad ethernet port or a crossed
circuit or somesuch in your logic board.
If that were my iMac, I’d take it apart to see if there’s anything in there
that could be brid
oddly yea but i think i narrowed it to something i tried this morning to
start it w/o the network cableleft idle for 2hrs came back.. no freeze,
connect it , it locks up within seconds tried again 3 times start up w/o
power wait a few connect to encounter freezing,
On Thu, Dec 24, 2015 at 8:00 PM,
If the RAM and HDD’s were bad, I doubt you would get as far as you get; after
all, the Finder is running at that point if nothing else.
Have you tried logging in as a different user? If the problem is something in
your user profile, you can re-install OSX from now until the heat death of the
un
i managed to find a spare hdd now unless i got THAT unlucky that its bad
too, i'm right back at the orginal issue (apps bounce but no open/freeze
up) i tested the ram but im Still thinking thier faulty and i dont have
any pcs to run a ramtest on.
unless hdd + ram's bad i'm curious just how far i
update: redid the partitions. OS9 went fine but OSX fails every time on
"Installing Base System Part 1" so im pretty much sure now the drives
toast.
On Tue, Dec 22, 2015 at 10:45 PM, Thomas Fritsch
wrote:
> i cant afford a Disc copy of DW, and yea it froze again for the 3rd time
> on the Catal
i cant afford a Disc copy of DW, and yea it froze again for the 3rd time
on the Catalouge File in the OSX Installer's Disk Utility. i'm not super
bummed as the partitions are fresh so not much data outside the CallUp
script i was using to make the dialup connection work. was on either
partition.
> On Dec 22, 2015, at 7:04 PM, Ryan Waldon wrote:
>
> On 22.December 2015 at 21:11:44 , Xion Dracari (xiondrac...@gmail.com) wrote:
>> Most likely but i wanted to get a opnion,
>>
>> yesterday i had to rush to shut it off as we had storm here and i didnt have
>> it on surge protector, i had to
On 22.December 2015 at 21:11:44 , Xion Dracari (xiondrac...@gmail.com) wrote:
Most likely but i wanted to get a opnion,
yesterday i had to rush to shut it off as we had storm here and i didnt have it
on surge protector, i had to flat out pull the cable (a few moments later
luckily i did as power
Most likely but i wanted to get a opnion,
yesterday i had to rush to shut it off as we had storm here and i didnt
have it on surge protector, i had to flat out pull the cable (a few moments
later luckily i did as power went out and the Breaker tripped in teh main
room) i turned it on today as
12 matches
Mail list logo
