On Fri, Feb 02, 2007 at 04:13:27AM -0500, Richard A Steenbergen wrote:
> You know I haven't had any free time to run real tests or anything, but I
> noticed a significant increase in BGP convergence time when upgrading from
> JUNOS 7.2/7.3 (and I think some 7.4) to 7.6. When you make a policy
>
Mounir,
Try the following:
[edit]
[EMAIL PROTECTED] run show ospf neighbor instance test
Address Interface State ID
Pri Dead
10.1.8.53fe-1/0/0.0 Full
10.1.8.5312831
If you do not follow the 'show ospf neighbor' comman
Hi Team,
I'm working on multiple OSPF instance (each on its own vrf) described on th
scenario bellow :
R1, R2 (M20) and my R3(M7i) are connected on the same L2 switch (same area
0.0.0.1)
R1 and R2 already established OSPF election and can exchange their route
under OSPF, but M7i Ospf still fail
Hi all,
FEB/CFEB CPU is responsible for delivery information between PFE (asics) and
RE.
If your m7i is doing packet sampling (netflow/jflow, or to file)? This is
one of very often reasons of hi CPU usage.
This CPU is also responsible for generate ICMP reports like e.g. "TTL
exceeded" or "No rou
Hi Jeorg,
Starting with the 'obvious' is always a good idea :)
What other events are taking place on the router at the same time of
(or prior to) relatively high loads? Any link flaps, neighborships
going down/up etc?
Also, you may check whether this is a particular issue (every n time)
or no
Hi there,
i still have a strange behaviour on our M7i. The CFEB load goes up to
20%, then goes down to <5% then up again and so on.
I really have no idea what is causing this. We have several other
routers (M5/M10/M20) that all behave normal.
The behaviour of the m7i is also seen in our smokepi
6 matches
Mail list logo
