Hi,
Any news about what draft Juniper is considering implement to avoid waste
bandwidth when sending multicast over VPLS in ring topology?
tks,
Alaerte
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/jun
The easiest way to advertise the secondary IP configured on the trust
interface would be to configure a route-map which matches the trust
interface and then applying that route-map to ospf, as in the following:
set vrouter trust-vr
set route-map name "export-routes" permit 1
set match interface tr
Hello Vincent
this is saito.
please let me know your configration files.
would you config ospf in it collectly?
I think your config not completely or anthing problem config it.
thanks.
On Thu, 29 Nov 2007 13:27:56 +0100
Vincent De Keyzer <[EMAIL PROTECTED]> wrote:
> Hello,
>
> I am very
Hello,
I am very new to Netscreen products.
I have configured a secondary IP address on the trusted interface of a
SSG-550; I can see the new subnet in the routing table (as "Connected"),
but it is not advertised to the OSPF neighbor.
Am I trying something impossible? If not, how do I have to
Hi Guys
i want to enable Qos mechanism on Ethernet interfaces, there is more then 50
sub-interfaces on M7 series router
How i can implement same QoS policy on these interfaces and, which one is
practical for QoS, prioritize or marking (dscp)
İf you have some example configuration texts, can you
5 matches
Mail list logo