waqas Mohammad wrote:
Hi,
I am facing problem with installation of Netscreen VPN client 10.7.7 on
windows Vista, dose it works on Vista or it is only design for XP?
10.8.3 build 6 works on Vista. Maybe you should upgrade.
___
juniper-nsp mailin
Hi,
I am facing problem with installation of Netscreen VPN client 10.7.7 on
windows Vista, dose it works on Vista or it is only design for XP?
Thanks
Waqas.
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/li
Hi,
Status vector means Bit vector advertising the state of local PE-CE
circuits to remote PE routers. A bit value of 0 indicates that the local
circuit and LSP tunnel to the remote PE router are up, whereas a value
of 1 indicates either one or both are down.
It is basically Layer 2 VPN and VPLS
Yes, no tp hardware in the chassis, this is why I'm using no-tunnel
-services cmd.
Is there any workaround? Or at least the documentation mentioning that VPLS
PE is not supported on certain FPCs...
Thanks,
Marlon
[EMAIL PROTECTED]> show chassis hardware detail
Hardware inventory:
Item
What type fpc is in that M20? I believe a B2/efpc is needed for lsi
type interfaces, such as needed for no-tunnel services config. In the
past I have seen this blackhole vpls traffic coming in from the core.
I assume you have no tp hardware? If you did worth loosing the
no-tunnel.
Send OP of a
Does anyone know why M20 would not learn remote (comming from a PE) MAC
addresses? I'm on Junos 9.1.
It is learning ce mac addresses. Also it is forwarding traffic in the ce->pe
direction, but everything coming from the pe side is not getting out on the
ce side.
I even put the sniffer between MX an
Does anyone know what this status-vector below in 'show vpla connections
extensice' mean? It is in bold red below.
How can it be interpreted?
Thanks
[EMAIL PROTECTED] run show vpls connections extensive
Layer-2 VPN connections:
Legend for connection status (St)
EI -- encapsulation invalid NC
7 matches
Mail list logo