Hi Guys, thanks for your help.
I was informed by JTAC that this is a known issue.
This issue matches a Juniper internal KA which basically states that
this SRP in slot 6 (with the problem) will need to be RMA'd so that the
processor can be upgraded.
SRP's not affected will have a serial num
Hi Thiago,
probably you are running out of memory.
Give a look on the SRP Module Memory Requirements section on the 8.2.2
release notes:
http://www.juniper.net/techpubs/software/erx/junose82/sw-rn-erx822/html/sw-rn-erx822-body2.html#964916
Regards,
./diogo -montagner
On Sat, Oct 18, 2008 at 12
Hi,
Have you checked the system requirements on the JunosE release notes?
HTH
Paulo
On Sat, Oct 18, 2008 at 11:18 AM, Drechsel, Thiago (NSN - BR/Curitiba) <
[EMAIL PROTECTED]> wrote:
> Hi all.
>
> Has anybody seen this message, when uploading JUNOSe?
>
> Loading
> local:/images/srp/srp47d78a4
> What is equivalent to Cisco command "sh mpls forwarding-table label 44169"
> in JUNOS.
"show route table mpls.0 label 44169" would probably do the job.
Steinar Haug, Nethelp consulting, [EMAIL PROTECTED]
___
juniper-nsp mailing list juniper-nsp@puck.n
What is equivalent to Cisco command "sh mpls forwarding-table label 44169"
in JUNOS.
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
Hi all.
Has anybody seen this message, when uploading JUNOSe?
Loading
local:/images/srp/srp47d78a49.exe...rsLoadModule(local:/images/srp/srp47
d78a49.exe): Release is too large for obsoleted CPU to load
This was seen when upgrading a ERX_1410 from 7-2-3 to 8-2-2p0-7.
Thanks for any comment
6 matches
Mail list logo