-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi List,
is there any other documentation than
http://www.juniper.net/techpubs/software/junos/junos92/mx-solutions-guide/frameset.html
for the MEF ethernet specific capa-
bilities of the MX series? I'm miss-
ing a documentation e.g.. of the diff-
eren
Hello,
i am running 9.2R15 on a M7i acting as LNS.
I am trying to get accounting updates to work but apparently they are
never sent.
This is my config:
[EMAIL PROTECTED] show access
radius-server {
xx.xx.xx.xx {
port 1812;
accounting-port 1813;
secret "";
If I'm writing a rewrite rule (EXP bits) in which I want to set MPLS
EXP bit 000 for traffic in a given forwarding-class, should I be able
to cover situations where the traffic has both high and low
loss-priorities?
My understanding is that rewrite rules have 2 inputs
(forwarding-class and loss
Hi Chad,
Below is a sample configuration.
For the vbr configuration do it inside the vci 0.10.
https://www.juniper.net/techpubs/software/junos/junos92/swconfig-network-interfaces/configuring-atm-interfaces_1.html
#id-10789115
--raymondh
at-0/3/0 {
mtu 9180;
encapsulation atm-pvc;
Hello,
I'm new - very new - to the Juniper world and have a quick question that I
have not been able to resolve myself or find documentation online for.
I'm trying to replace a Cisco with a Juniper for PVC aggregation and have
run into a stumbling block finding a workaround for the cisco command
5 matches
Mail list logo