Re: [j-nsp] Olive question - PIM not working

Hi all. Looks like the guy who wrote the multicast patch didn't add PIM multicast address (http://www.netemu.cn/bbs/archiver/tid-7417-page-1.html), or something like this... Does anyone have patch source code? :-) Otherwise, we'll have to wait for a new patch. Thiago -Original Message

Re: [j-nsp] Olive question - PIM not working

Do a Google search and you will find much information on it. On Wed, Apr 1, 2009 at 12:20 PM, ChrisSerafin wrote: > Thiago Drechsel - Gmail wrote: >> >> Hi Jonathan. >> >> That's a good point for the future :-( >> But the problem is that I can't even establish PIM neighbors, with >> simple multic

Re: [j-nsp] Olive question - PIM not working

Thiago Drechsel - Gmail wrote: Hi Jonathan. That's a good point for the future :-( But the problem is that I can't even establish PIM neighbors, with simple multicast packets. I can se PIM hello messages leaving olive, reaching my physical eth interface, but I can't see PIM hello entering olive.

Re: [j-nsp] Olive question - PIM not working

Anyone have an olives running 9.0 or later? - Original Message - From: juniper-nsp-boun...@puck.nether.net To: Jonathan Looney Cc: Thiago Drechsel - Gmail ; Juniper List Sent: Wed Apr 01 09:05:28 2009 Subject: Re: [j-nsp] Olive question - PIM not working On Wed, Apr 1, 2009 at 10:38 A

Re: [j-nsp] Olive question - PIM not working

On Wed, Apr 1, 2009 at 10:38 AM, Jonathan Looney wrote: > Just a guess: depending on the PIM mode you are using, you may need a tunnel > PIC (or equivalent - AS/MS PIC) in your RP to handle PIM decapsulation. As > the Olive doesn't have a tunnel PIC, that may pose a problem. IIRC, you can get aro

Re: [j-nsp] Olive question - PIM not working

Hi Jonathan. That's a good point for the future :-( But the problem is that I can't even establish PIM neighbors, with simple multicast packets. I can se PIM hello messages leaving olive, reaching my physical eth interface, but I can't see PIM hello entering olive. I think Olive OR VMware are una

Re: [j-nsp] Olive question - PIM not working

Just a guess: depending on the PIM mode you are using, you may need a tunnel PIC (or equivalent - AS/MS PIC) in your RP to handle PIM decapsulation. As the Olive doesn't have a tunnel PIC, that may pose a problem. -Jon On Wed, Apr 1, 2009 at 10:14 AM, Thiago Drechsel - Gmail < thiago.drech...@gma

[j-nsp] Olive question - PIM not working

Hi list! I have Olive boxes based on VMWare. I can connect these routers together with vlan-id tag since FreeBSD has been patched with syscall11.ko. Multicast seems to work, since ospf, rip and ldp have worked well between two routers. Olive Box (Junos 8.5R1.14) [Olive1]--em0.1

Re: [j-nsp] M10i RE Upgrade

Your Juniper partner does not sound up to speed. If you are not buying an M10i, and just the engine right now, the only part you can buy is the RE-850-1536-WW-S (the WW stands for JUNOS Worldwide). They do not sell the RE-850-1536-S anymore. The -BB is only available when you buy an M10i with

Re: [j-nsp] M10i RE Upgrade

On Wednesday 01 April 2009 03:51:37 pm Gareth Campling wrote: Just to add onto what Dan has mentioned: > RE-850-1536-BB This ships with the chassis - you need at least one to operate the thing :-). But it's not necessarily free, so I find the term "Base Bundle" to be a bit of a misnomer. The

Re: [j-nsp] Not announced eBGP route

Hi, you must be sure, that your connected (direct) networks properly described in the export BGP policy. Because: *Default Policies **For BGP: ** Import: accept all routes learned from BGP neighbors Export: send all routes learned from BGP neighbors to all BGP neighbors, but only active routes a

[j-nsp] Not announced eBGP route

Not announced eBGP route if the network interfaces assigned IP from the network. Junos 9.5R1.8 ES ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp

Re: [j-nsp] M10i RE Upgrade

Hi Gareth BB is Base Bundle (the card is comming in the chassis) R is Redundancy (that you buy if you want redundancy and so that is optionnal) S is Spare (That you by for replacement and so that is not normaly installed in a router) You'de rather change of supplier ;-) Kind regards Alain ---

Re: [j-nsp] M10i RE Upgrade

Hi Gareth BB is Base Bundle R is Redundant S is Spare On Wed, 2009-04-01 at 08:51 +0100, Gareth Campling wrote: > Hi > > > > I am looking at upgrading 2 of our M10i's RE's to the RE-850-1536 but a > bit confused by our suppliers price list. > > > > Can anyone tell me the difference bet

[j-nsp] M10i RE Upgrade

Hi I am looking at upgrading 2 of our M10i's RE's to the RE-850-1536 but a bit confused by our suppliers price list. Can anyone tell me the difference between these.. except the price ? RE-850-1536-BB RE-850-1536-R RE-850-1536-S Our suppliers does not know... Thanks in advanc