You can also use physdiskwrite.exe utility and make compact flash on your PC
with image file!
Regards,
Dusan
On Fri, Apr 17, 2009 at 4:32 AM, snort bsd wrote:
>
> Hi all:
>
> How could i create a bootable compact flash? Basically I want the m7i boot
> from compact flash and running the system o
On 4/17/09 8:15 AM, Faizal Rachman wrote:
But if we ignore the restarted router, why should i have to unplug/plug E1
cable facing to peer router to make it work again.
I believe that keepalive is kind of setting to make interface know while it
is up or down. But after several times, link cannot
On Friday 17 April 2009 12:04:31 pm Faizal Rachman wrote:
> Dear All,
> I have problem with J Series router which often restart.
Why does the router often restart? Bad power source?
Mark.
signature.asc
Description: This is a digitally signed message part.
__
I guess so because there are nothing notified in log message indicated with
chassis failure or something.
But if we ignore the restarted router, why should i have to unplug/plug E1
cable facing to peer router to make it work again.
I believe that keepalive is kind of setting to make interface know
On Thu, Apr 16, 2009 at 21:26, wang yi wrote:
>
> Just wondering if it is possible to add custom log messages to the log file
> so that I can have something like:
>
> Apr 15 01:30:00 [case1234] PIC for so-0/0/0 replaced, keep an keen eye on
> it.
>
> when the duty engineer do a "show log messages
Dear All,
I have problem with J Series router which often restart.
But the problem is that I should unplug/plug port to peer router before link
came up. It is E1 interface.
Is there any knob that link automatically forced to retry or refresh so i
don't need to play physically.
Thank you.
Regards,
Hi,
check recipe 1.24 from JUNOS Cookbook By Aviva Garrett - Creating an
Emergency Boot Disk:
*Problem
You want to create a boot disk to use in an emergency if the software and
filesystems on the router become so damaged that you just want to
reconfigure the router from scratch.
**
Solution
Creat
You can do it with event policy. But it might depend on junos version.
Nilesh
On Apr 16, 2009, at 8:29 PM, "wang yi"
mailto:wang.yi.2...@googlemail.com>> wrote:
Just wondering if it is possible to add custom log messages to the log file
so that I can have something like:
Apr 15 01:30:00 [c
Hi all:
How could i create a bootable compact flash? Basically I want the m7i boot from
compact flash and running the system off the compact flash.
Thanks
The new Internet Explorer 8 optimised for Yahoo!7: Faster, Safer, Easier.
___
juniper-ns
Just wondering if it is possible to add custom log messages to the log file
so that I can have something like:
Apr 15 01:30:00 [case1234] PIC for so-0/0/0 replaced, keep an keen eye on
it.
when the duty engineer do a "show log messages | match case1234" knows when
and what FRU's have been replace
Hello List,
I'm looking for an intelligent way to manage IP pools on ERX.
Currently we are using statically configured pools to assign IPs to
PPP customers, which is of course inefficient.
The documentation I could find was about downloading access routes
from radius server, but I don't under
Hi all,
just wanted to know, if somebody already has implementen a JunoScript/XNM
implementation
on python - before I do the work someone else has already done ;)
Thanks
Tom
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.n
Thanks for the very detailed response, Romain.
One other question:
You will have 2 default routes but using only the one with lower
preference.
If trackIP failed, interface will be "administratively" be DOWN and
default
route inactive so the Internet traffic will used other link.
How does
On Wed, Apr 15, 2009 at 11:16:56AM +0800, Mark Tinka wrote:
> That's right, which is what we see for the export policies
> we applied to our IS-IS deployment. I guess the issue we're
> seeing with wrong behaviour for the v4 BGP export policy
> kind of threw us off with what to expect for v6.
>
14 matches
Mail list logo