Thanks a lot Nilesh
That's exactly what was happening.. high drops in Q3 :(
Problem is solved...
Regards,
Asad.
-Original Message-
From: Nilesh Khambal [mailto:nkham...@juniper.net]
Sent: Tuesday, May 19, 2009 11:13 AM
To: Asad Ul-Islam
Cc: juniper-nsp@puck.nether.net
Subject: Re: [
Do you have a lot of lsa retransmissions on E1? Check for drops in Q3
or Q0 on E1. Try disabling any CoS config you might have on this E1
link.
Thanks,
Nilesh
--
Sent from my mobile handheld device
On May 18, 2009, at 9:32 PM, "Asad Ul-Islam"
Dear friends!
I have 2 Juniper Routers connected via E1 Interface and running OSPF on
them. However OSPF is stuck in Exchange state. I have verified that MTU is
same on both ends. Physical Media is absolutely fine and error free, yet its
stuck in Exchange state. One of these router has connect
Hi all,
Noted. Thanks for the help from all members.
I appreciate it very much.
Best regards,
Simon
On Mon, May 18, 2009 at 11:26 PM, wrote:
> > However my concern is can we use 10 Gi PIC on M10i or M20 router? I have
> > check the Table of PICs Supported in the M10i & M20 from www.juniper.ne
I've passed this on to the appropriate people
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
Psst, can someone fix the content-type on the Juniper website for
software downloads. I just went to grab the install-media for 9.3r3 and
it came up text/plain, which is really obnoxious for those of us not in
the "right click and save as" (as the instructions on the website so
eloquently put it) c
MX will do STM64 now with the MXFPC-3. Not great for port density but it does
at least make the option available if you really need it.
Dave Humphrey
-Original Message-
From: juniper-nsp-boun...@puck.nether.net
[mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of sth...@nethelp.no
An M20 pic will go into a M10i just fine, but as Ron said the bottom plate
if different. This means unsupported.
To get the M20 PIC in a M10i you will need to pull out the adjacent pic and
have someone with a flash light shining in the slot to line up the pins
properly as not to bend them. To
I don't think you can reuse M20 pics on an M10i without changing the
bottom plate. I think it's vice versa you can use M10i pic on an M20.
The M10i pics have a different bottom plate that allows for the "catch"
on the card. The M20 cards do not have this thus prohibiting them from
going in an M10
> However my concern is can we use 10 Gi PIC on M10i or M20 router? I have
> check the Table of PICs Supported in the M10i & M20 from www.juniper.net, it
> is not listed.
> Does that mean it is not supported?
Correct. Both M10i and M20 can handle STM-16 (in the form of a full width
FPC with integr
Hi all,
I have some question about M10i router. After reading some old thread in
this mailing list archive, I noticed that we can re-use M20 PIC on M10i.
(please correct me if I am wrong)
However my concern is can we use 10 Gi PIC on M10i or M20 router? I have
check the Table of PICs Supported in
11 matches
Mail list logo