Re: [j-nsp] VRRP in Olive?

Bjørn Tks for this link. The quick/dirty fix below works for mcast traffic with current qemu cvs. Also the eepro100.c firmware is from 2007 from the current qemu cvs, what do we have to update/if any in this driver http://svn.berlios.de/viewcvs/ar7-firmware/qemu/trunk/hw/eepro100.c to allo

Re: [j-nsp] lsp required for vpls?

> Do I need to explicitly configure MPLS LSPs between the PEs (using > protocols/mpls/label-swithing-path)? Or just configure RSVP or LDP on > the PEs so that LSPs can be automatically established by VPLS? If you use RSVP for your LSPs, they need to be explicitly created. If you use LDP for your L

Re: [j-nsp] lsp required for vpls?

Re: [j-nsp] lsp required for vpls?

Thank you all for the reply. Do I need to explicitly configure MPLS LSPs between the PEs (using protocols/mpls/label-swithing-path)? Or just configure RSVP or LDP on the PEs so that LSPs can be automatically established by VPLS? Thanks. -Simon On Thu, Aug 6, 2009 at 1:12 PM, Harry Reynolds wrote

Re: [j-nsp] lsp required for vpls?

Ldp can both signal vpls (ldp based vpls control plane) and establish lsps. You either single vpls with ldp or bgp, and then transport via a lsp between pes. This transport lsp can be rsvp or ldp signaled. Regards -Original Message- From: juniper-nsp-boun...@puck.nether.net [mailto:

Re: [j-nsp] lsp required for vpls?

On Thu, Aug 06, 2009 at 12:35:18PM -0400, Simon Chen wrote: > Hi all, > > I read in the VPN configuration guide that LSPs between PEs are > required for VPLS. However, I am able to establish a VPLS setup using > LDP signalling, but without MPLS-LSP between PEs. > > Does anyone know why? My guess

Re: [j-nsp] lsp required for vpls?

Simon, I am not a Junos expert, but in general since you enabled link ldp between the PE routers and also a targteted ldp between PE's , you should be okay. did on quiet get what you meant by "without MPLS-LSP" ??? because you already have mpls lsp by enabling link ldp. regards dinesh On Thu

[j-nsp] lsp required for vpls?

Hi all, I read in the VPN configuration guide that LSPs between PEs are required for VPLS. However, I am able to establish a VPLS setup using LDP signalling, but without MPLS-LSP between PEs. Does anyone know why? My guess is that LSP is only required if you're going for the BGP signalling, but n

Re: [j-nsp] VRRP in Olive?

pat lynch writes: > Since previous entries in other wikis, qemu's main tree has all of the > support on the ethernet adapter side, multicast side, etc, to work natively > out of the box. No, it does not. There is no support for setting the multicast list in the default QEMU/KVM eepro100 driver,

Re: [j-nsp] router protect policy

On Thu, 6 Aug 2009, Pekka Savola wrote: On Wed, 5 Aug 2009, Chris Morrow wrote: as a base-level question... why are these 'standard firewall filter' features NOT supported on what is a 'standard juniper' platform? if you need/want these, open bugs. it's silly that these aren't supported.

Re: [j-nsp] VRRP in Olive?

All. > > This patched works with the lastest qemu stream, > http://juniper.cluepon.net/index.php/Olive; confirmed working on junos 9.3 > :- > > Since previous entries in other wikis, qemu's main tree has all of the > support on the ethernet adapter side, multicast side, etc, to work natively > out

Re: [j-nsp] VRRP in Olive?

All. > > This patched works with the lastest qemu stream, > http://juniper.cluepon.net/index.php/Olive; confirmed working on junos 9.3 > :- > > Since previous entries in other wikis, qemu's main tree has all of the > support on the ethernet adapter side, multicast side, etc, to work natively > out

Re: [j-nsp] VRRP in Olive?

All. This patched works with the lastest qemu stream, http://juniper.cluepon.net/index.php/Olive; confirmed working on junos 9.3 :- Since previous entries in other wikis, qemu's main tree has all of the support on the ethernet adapter side, multicast side, etc, to work natively out of the box. I

Re: [j-nsp] ex4200 throughput trouble on 10GE interface

I'm only using Layer2 features, so perhaps that is why I'm not having problems. On Thu, Aug 06, 2009 at 11:16:23AM +0400, Michael Schedrin wrote: > I had issue with bootp helper. It had stopped forwarding packets at the > moment. Also only reboot resolved the problem. > > 2009/8/5 Chuck Anderson

Re: [j-nsp] License configuration for M-series

Once upon a time, Muhammad Atif Jauahar said: > I m not getting MLPPP interface by above command. Do I need to configure > license for MLPPP, if yes then tell me how? Nothing will show up for MLPPP until you configure something. Configure units on lsq-4/2/0 and they should work. -- Chris Adams

Re: [j-nsp] License configuration for M-series

What if we also have IPSec license with the same MS PIC. Will both MLPPP and IPSec will work with the same layer 2 service package configured? Regards. Aamir ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinf

Re: [j-nsp] License configuration for M-series

If you want to use MLPPP,CRTP etc MS PIC should be running the Layer 2 link service package. To determine which package a MS PIC supports, issue the show chassis pic fpc-slot slot-number pic-slot slot-number command. The Package field displays the value Layer-2 or Layer-3. To enable a service pac

[j-nsp] License configuration for M-series

Hi Recently I have installed Multi Service PIC on M-series Router (M40e). I also got license for MLPPP with MS PIC. Show chassis hardware (Output) FPC 4REV 04 710-011725 KG2692M40e EP-FPC Type 1 CPUREV 03 710-004602 KE2918FPC CPU PIC 0

Re: [j-nsp] VRRP in Olive?

Hello, Check this link, maybe it will help. http://www.mail-archive.com/qemu-de...@nongnu.org/msg11306.html Br, On Thu, Aug 6, 2009 at 12:25 PM, Patrik Olsson wrote: > If you run Olive on VMWare it wont work at all since multicast dont work > well at all on the virtual ethernet. > > Sounds g

Re: [j-nsp] VRRP in Olive?

If you run Olive on VMWare it wont work at all since multicast dont work well at all on the virtual ethernet. Sounds great if QEMU fixes this little caveat... Cheers Patrik ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net

Re: [j-nsp] VRRP in Olive?

I could get it to work after fixing multicast in QEMU because it looks like that interface driver for fxp interfaces doesn't accept mcast packets by default. HTH, bit. On Wed, 2009-08-05 at 12:49 -0400, Stefan Fouant wrote: > Anybody have any luck getting VRRP to run in an Olive? >

Re: [j-nsp] ex4200 throughput trouble on 10GE interface

I had issue with bootp helper. It had stopped forwarding packets at the moment. Also only reboot resolved the problem. 2009/8/5 Chuck Anderson > On Wed, Aug 05, 2009 at 11:00:31AM +0200, Malte von dem Hagen wrote: > > Hi, > > > > Michael schrieb: > > > I use 9.5R2.7. Very interesting information