Re: [j-nsp] BGP strange problem on M10i

If you have NSR configured, then have a look at PR/396291 Thanks & Regards, Tarique A. Nalkhande -Original Message- From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of Ramesh Karki Sent: Friday, November 13, 2009 10:06 PM To: Chris Adams

Re: [j-nsp] Urgent downgrade pic

Hi Shekar, Is there any specific reason, you downgrading from 9.4 to 7.2? Which type of interfaces are not coming up? Most likely they are not supported in 7.2. You need to check Supported PIC page in the external documentation to find the release the particular PIC is supported from For example

Re: [j-nsp] BGP strange problem on M10i

Hi, The version we are using is JunOS 9.2R2.15 I also supposed that Junos do not require any kind of reset, but when I add any new prefixes (ow n by AS or its customers) on policy-statement to block incoming via upstream and commit, it does not take effect. But when I hard reset the peer then only

Re: [j-nsp] BGP strange problem on M10i

Ramesh Karki wrote: > Hello all, > > We are facing some issues on Juniper M10i, i.e. > > First, we had to hard reset the bgp peer whenever we change the policies > (inbound policy) that we had set. By just doing soft reset the router will > not take effect of that changed policies until we do har

Re: [j-nsp] BGP strange problem on M10i

Once upon a time, Ramesh Karki said: > First, we had to hard reset the bgp peer whenever we change the policies > (inbound policy) that we had set. By just doing soft reset the router will > not take effect of that changed policies until we do hard reset. You shouldn't need to do any kind of rese

[j-nsp] BGP strange problem on M10i

Hello all, We are facing some issues on Juniper M10i, i.e. First, we had to hard reset the bgp peer whenever we change the policies (inbound policy) that we had set. By just doing soft reset the router will not take effect of that changed policies until we do hard reset. Sometimes even after hard

Re: [j-nsp] Urgent downgrade pic

Also i wanted to know what are the steps that happen when image is loaded, how the image is loaded in fpc, when does it happen. Any document for this. Also while downgrading, why do we need to go from say 9.4 to 9.0 than to 8.5 then 8.0. Any specific reason. Thanks, Shekar On Fri, Nov 13, 2009

Re: [j-nsp] Urgent downgrade pic

On Fri, Nov 13, 2009 at 6:25 PM, chandrasekaran iyer wrote: > Hi, > >   When i download from 9.4 to 7.2 , i dont' see the interfaces coming > up after issuing "run show interface terse". >  Also it seems we cannot downgrade directly from 9.4 to 7.2, we have > to step by step downgrade like 9.4 to