Try "show chassis power" - at least on MX it shows you how much
reserve is available.
Regards,
Tom
Am Tue, 25 Jan 2011 17:54:51 -0500 (EST)
schrieb Clarke Morledge :
> I received a note off-line suggesting the "show chassis environment
> pem" command. It will work on the SRX platform:
>
> sho
I received a note off-line suggesting the "show chassis environment pem"
command. It will work on the SRX platform:
show chassis environment pem node 0
node0:
--
PEM 0 status:
State Online
Temperat
I have a pair of SRX 3400s that are experiencing some odd hardware
problems. I suspect that there could be a power issue in that an
individual system is unable to power up a line card due to inadequate
power.
Unfortunately, I asked JTAC and they could not tell me of any JUNOS
command for de
On Jan 25, 2011, at 8:16 AM, Mark Kamichoff wrote:
>
> BGP routes on Junos are stored in the adjacency-rib-in table (show route
> receive-protocol bgp $peer) even if you filter them from being installed
> into inet.0 or inet6.0.
You are correct that this is the default behavior of JUNOS. You can
On Mon, Jan 24, 2011 at 06:02:13PM +, Maqbool Hashim wrote:
> I'm guessing most people are going to say this is a bad idea, but I
> wasn't sure so I thought I'd ask. Basically if I was to receive a
> full BGP routing table and filter the routes on the SRX210, would the
> SRX be able to handle
On 01/25/2011 02:28 PM, Stephane JAUNE wrote:
Hi,
SRX100 can manage up to 8k BGP routes, so not enough for a full BGP
table.
He specifically said he wasn't going to install the full table, but was
going to filter it.
You might have to filter an awful lot before it'll fit i
vrf-table-label is your friend
On 1/25/11 4:32 PM, Leigh Porter wrote:
Hello all,
Does anybody know how to persuade interfaces routes into the L3VPN
routing table to be redistributed across the network?
At the moment, I can build a policy to allow static routes, OSPF routes
and interface rou
Hello all,
Does anybody know how to persuade interfaces routes into the L3VPN
routing table to be redistributed across the network?
At the moment, I can build a policy to allow static routes, OSPF routes
and interface routes to be propagated into the routing table but only
the loopback routes ac
Hi,
SRX100 can manage up to 8k BGP routes, so not enough for a full BGP
table.
Regards
-Message d'origine-
De : juniper-nsp-boun...@puck.nether.net
[mailto:juniper-nsp-boun...@puck.nether.net] De la part de Maqbool Hashim
Envoyé : Monday, January 24, 2011 7:0
9 matches
Mail list logo