Re: [j-nsp] juniper-nsp Digest, Vol 101, Issue 46

Hi, can I block (drop) router advertisemet (RA) only on specific ports in EX2400 (EX2200) configuration. The problem is in security, because when any station (PC, notebook) connected to LAN, starts own (but not official!!!) RA, I thing that this unoffical RA will pass throught switch. RA is usin

Re: [j-nsp] output-list for ex4200

On Wed, Apr 27, 2011 at 12:24:25PM +0100, Nick Ryce wrote: > > Any ideas if this is supported in 10.4 as we have a standard ACL we > use on most customer vlans and then a customer specific vlan? Nah, filter chains are definitely not supported on EX, and I'm not aware of any near term plans to a

Re: [j-nsp] msdpc example configs...

Hi, Well for the netflow part I have done the following for 10.2R1.8 on a MX240 with MS-DPC: root@PE1-HOR> show configuration chassis fpc 1 pic 0 { adaptive-services { service-package layer-3; } } root@PE1-HOR> show configuration forwarding-options sampling { sample-onc

[j-nsp] output-list for ex4200

Hi, Im currently running an ex4200 with 10.0S12. I have tried to chain 2 output filters together on an RVI. The command completes successfully and a 'commit check' does not throw up any errors. When I look at the config the below appears:- show interfaces vlan unit 965 ## ## inactive: interfa