On 12/01/2012, at 5:21 PM, Per Granath wrote:
>> Does anyone know if there is a special apply-group for referencing individual
>> virtual-chassis members?
>
> member0, member 1, member2, ...
> http://kb.juniper.net/InfoCenter/index?page=content&id=KB15556
>
Well that's nice and obvious - thank
Hi all,
Does anyone know if there is a special apply-group for referencing individual
virtual-chassis members?
The SRX has node0, node1 & apply-groups ${node} and M/T have re0 re1 plus the
lcc variants, but I have a hazy (though possibly imagined) recollection of
seeing some config that allo
Have you contacted JTAC about this issue?
On Wed, Jan 11, 2012 at 2:14 PM, Jeff Wheeler wrote:
> We have decided on a better work-around for our missing ARP entry
> problems on the EX4200 and friends.
>
> As you may recall, the EX4200 will sometimes have an ARP entry in the
> control-plane, bu
We have decided on a better work-around for our missing ARP entry
problems on the EX4200 and friends.
As you may recall, the EX4200 will sometimes have an ARP entry in the
control-plane, but it will not be present in the data-plane. You can
investigate by checking your destination IP address with
That's pretty cool. Looks like there's some additional knobs as well.
{master}[edit]
jnpr@R1-RE0# set groups dhanks when time 8am to 5pm
{master}[edit]
jnpr@R1-RE0# set groups dhanks when routing-engine re0
{master}[edit]
jnpr@R1-RE0# set groups dhanks snmp community dhanks authorization
read-o
Dale Shaw writes:
>Does anyone know of a way to enforce traffic policing or shaping based on
>time of day?
Beginning in 11.3, config groups have a "conditional application"
mechanism, so they are only applied on certain products/models or
at certain time of day ranges.
I'll admit I've never used
6 matches
Mail list logo